i-manager Publications

Review on The Impact of Deposition Conditions on Reactively Deposited CZTSe Thin Films

Rekha Prajapat*, Y. C. Sharma**

* Research Scholar, Department of Physics, Vivekananda Global University, Jaipur, Rajasthan, India.

**Dean, Research & Development and Professor of Physics, Vivekananda Global University, Jaipur, Rajasthan, India.

Periodicity:October - December'2018
DOI : https://doi.org/10.26634/jms.6.3.14831

Abstract

In the second generation thin film solar cell, Copper Zinc Tin Selenium (CZTSe) thin film is considered as the quintessential absorber layer in solar cell as its constituents are earth abundant and non-toxic, making it environmental friendly. Many fabrication methods have been employed to fabricate the films like Thermal evaporation method, pulsed layer deposition, RF-DC Sputtering, etc. The authors have monitored the aspects that highly influence the band gap of CZTSe thin films during the deposition process. This paper recapitulate the parameters that affect the band gap of CZTSe thin film as an absorber layer like substrate temperature, annealing temperature, and order of precursors.

Keywords

Substrate Temperature, Annealing Temperature and Ratio of Precursor.

How to Cite this Article?

Prajapat, R., and Sharma, Y. C. (2018). Review on the Impact of Deposition Conditions on Reactively Deposited CZTSe Thin Films. i-manager’s Journal on Material Science, 6(3), 50-55. https://doi.org/10.26634/jms.6.3.14831

References

[1]. Ahn, S., Jung, S., Gwak, J., Cho, A., Shin, K., Yoon, K., ... & Yun, J. H. (2010). Determination of band gap energy (E ) of Cu₂ZnSnSe₄ thin films: On the discrepancies of g reported band gap values. Applied Physics Letters, 97(2), 021905.

[2]. Babu, G. S., Kumar, Y. K., Bhaskar, P. U., & Raja, V. S. (2008). Effect of post-deposition annealing on the growth of Cu₂ZnSnSe₄ thin films for a solar cell absorber layer. Semiconductor Science and Technology, 23(8), 085023.

[3]. Babu, G. S., Kumar, Y. K., Bhaskar, P. U., & Vanjari, S. R. (2010). Effect of Cu/(Zn+Sn) ratio on the properties of coevaporated Cu ZnSnSe thin films. Solar Energy Materials 2 4 and Solar Cells, 94(2), 221-226.

[4]. Brammertz, G., Buffière, M., Oueslati, S., ElAnzeery, H., Ben Messaoud, K., Sahayaraj, S., ... & Poortmans, J. (2013). Characterization of defects in 9.7% efficient Cu₂ZnSnSe₄ -CdS-ZnO solar cells. Applied Physics Letters, 103(16), 163904.

[5]. Fairbrother, A., Fontané, X., Izquierdo-Roca, V., Placidi, M., Sylla, D., Espindola-Rodriguez, M., ... & Saucedo, E. (2014). Secondary phase formation in Zn-rich Cu₂ZnSnSe₄ -based solar cells annealed in low pressure and temperature conditions. Progress in Photovoltaics: Research and Applications, 22(4), 479- 487.

[6]. Han, L., Chen, Z. S., Wan, L., & Xu, J. Z. (2012). Effect of substrate temperature on the preparation of Cu₂ZnSnSe₄thin films. In Applied Mechanics and Materials (Vol. 130, pp. 895-899). Trans Tech Publications.

[7]. He, J., Tao, J., Meng, X., Dong, Y., Zhang, K., Sun, L., ... & Chu, J. (2014). Effect of selenization time on the growth of Cu₂ZnSnSe₄ thin films obtained from rapid thermal processing of stacked metallic layers. Materials Letters, 126, 1-4.

[8]. Hong, S., Kim, C., Park, S. C., Rhee, I., Kim, D. H., & Kang, J. K. (2012). Characteristics of Cu₂ZnSnSe₄ film formed by using co-sputtered precursors and selenization. Molecular Crystals and Liquid Crystals, 565(1), 147-152.

[9]. Juškenås, R., Kanapeckait, S., Karpavičien, V., Mockus, Z., Pakštas, V., Selskien, A., ... & Niaura, G. (2012). A two-step approach for electrochemical deposition of Cu–Zn–Sn and Se precursors for CZTSe solar cells. Solar Energy Materials and Solar Cells, 101, 277- 282.

[10]. Kim, J., Park, S., Ryu, S., Oh, J., & Shin, B. (2017). Improving the open circuit voltage of Cu₂ZnSnSe₄ thin film solar cells via interface passivation. Progress in Photovoltaics: Research and Applications, 25(4), 308- 317.

[11]. Kim, K. H., & Amal, I. (2011). Growth of Cu₂ZnSnSe₄ thin films by selenization of sputtered single-layered Cu- Zn-Sn metallic precursors from a Cu-Zn-Sn alloy target. Electronic Materials Letters, 7(3), 225.

[12]. Klavina, I., Raudoja, J., Altosaar, M., Mellikov, E., Meissner, D. & Kaljuvee, T. (2010). CZTSe (Cu₂ZnSnSe₄) crystal growth for use in monograin membrane solar cells. In. Conf. of Young Scientists on Energy Issues, CYSENI 2010 (pp. 345-353).

[13]. Kuo, D. H., & Hsu, J. T. (2014). Development of 3.7% efficient Cu₂ZnSnSe₄ solar cells by selenizing Cu-Zn-Sn films deposited by DC sputtering on TiN-protected Mo/Glass substrates. Journal of Electronic Materials, 43(7), 2694- 2701.

[14]. Lai, F. I., Yang, J. F., Wei, Y. L., & Kuo, S. Y. (2017). High quality sustainable Cu₂ZnSnSe₄ (CZTSe) absorber layers in highly efficient CZTSe solar cells. Green Chemistry, 19(3), 795-802.

[15]. Li, J. V., Kuciauskas, D., Young, M. R., & Repins, I. L. (2013). Effects of sodium incorporation in Co-evaporated Cu₂ZnSnSe₄ thin-film solar cells. Applied Physics Letters, 102(16), 163905.

[16]. Li, J., Wang, H., Wu, L., Chen, C., Zhou, Z., Liu, F., ... & Zhang, Y. (2016). Growth of Cu₂ZnSnSe₄ film under controllable Se vapor composition and impact of low Cu content on solar cell efficiency. ACS Applied Materials & Interfaces, 8(16), 10283-10292.

[17]. Liu, T. C., & Hu, Y. (2014). Preparation and characterization of CZTSe films through electrochemical deposition route. Int. J. Electrochem. Sci., 9, 2985-2992.

[18]. Luckert, F., Hamilton, D. I., Yakushev, M. V., Beattie, N. S., Zoppi, G., Moynihan, M., ... & Krustok, J. (2011). Optical properties of high quality Cu₂ZnSnSe₄ thin films. Applied Physics Letters, 99(6), 062104.

[19]. Park, D., Nam, D., Jung, S., An, S., Gwak, J., Yoon, K., ... & Cheong, H. (2011). Optical characterization of Cu₂ZnSnSe₄ grown by thermal co-evaporation. Thin Solid Films, 519(21), 7386-7389.

[20]. Redinger, A., Mousel, M., Djemour, R., Gütay, L., Valle, N., & Siebentritt, S. (2014). Cu₂ZnSnSe₄ thin film solar cells produced via co-evaporation and annealing including a SnSe₂ capping layer. Progress in Photovoltaics: Research and Applications, 22(1), 51-57.

[21]. Rey, G., Redinger, A., Sendler, J., Weiss, T. P., Thevenin, M., Guennou, M., ... & Siebentritt, S. (2014). The band gap of Cu₂ZnSnSe₄: Effect of order-disorder. Applied Physics Letters, 105(11), 112106.

[22]. Salomé, P. M. P., Fernandes, P. A., & Cunha, A. D. (2010). Influence of selenization pressure on the growth of Cu₂ZnSnSe₄ films from stacked metallic layers. Physica Status Solidic, 7(34), 913-916.

[23]. Shao, L., Zhang, J., Zou, C., & Xie, W. (2012). Cu ZnSnSe Thin Films by Selenization of Simultaneously 2 4 Evaporated Sn-Zn-Cu Metallic Lays for Photovoltaic Applications. Physics Procedia, 32, 640-644.

[24]. Wibowo, R. A., Kim, W. S., Lee, E. S., Munir, B., & Kim, K. H. (2007). Single step preparation of quaternary Cu₂ZnSnSe₄ thin films by RF magnetron sputtering from binary chalcogenide targets. Journal of Physics and Chemistry of Solids, 68(10), 1908-1913.

[25]. Yeranyan, N. (2017). The influence of the precursor's deposition order on the properties of CZTSe thin films. Armenian Journal of Physics, 10(4), 199-205.

[26]. Zoppi, G., Forbes, I., Miles, R. W., Dale, P. J., Scragg, J. J., & Peter, L. M. (2009). Cu₂ZnSnSe₄ thin film solar cells produced by selenisation of magnetron sputtered precursors. Progress in Photovoltaics: Research and Applications, 17(5), 315-319.

Review on The Impact of Deposition Conditions on Reactively Deposited CZTSe Thin Films

Abstract

Keywords

How to Cite this Article?

References

If you have access to this article please login to view the article or kindly login to purchase the article

Purchase Instant Access

Options for accessing this content:

	North Americas,UK, Middle East,Europe		India	Rest of world
	USD	EUR	INR	USD-ROW
Pdf	35	35	200	20
Online	35	35	200	15
Pdf & Online	35	35	400	25