i-manager Publications

Effects of Copper Slag and Stone Dust in Concrete

M. V. Patil*, Y. D. Patil**

* Research Scholar, Department of Applied Mechanics, Sardar Vallabhbhai National Institute of Technology, Surat, Gujarat, India.

** Assistant Professor, Department of Applied Mechanics, Sardar Vallabhbhai National Institute of Technology, Surat, Gujarat, India.

Periodicity:June - August'2018
DOI : https://doi.org/10.26634/jste.7.2.14483

Abstract

This study was done to check if the stone dust can be used as a partial replacement to fine aggregate. The tests like compressive strength, Split Tensile Strength, Flexural Strength, Density, Modulus of Elasticity, and Permeability were conducted on cubes, beams, and cylinders. Concrete of M30 was designed for W/C ratio of 0.45. The present research work shows that the characteristics of concrete using stone dust and copper slag as partial replacement to fine aggregate are superior when compared to the control concrete.

Keywords

Compressive Strength, Concrete, Copper Slag, Density, Flexural Strength, Stone Dust

How to Cite this Article?

Patil, M. V., Patil, Y. D. (2018). Effects of Copper Slag and Stone Dust in Concrete, i-manager's Journal on Structural Engineering, 7(2), 37-42. https://doi.org/10.26634/jste.7.2.14483

References

[1]. Bonavetti, V., Donza, H., Rahhal, V., & Irassar, E. (2000). Influence of initial curing on the properties of concrete containing limestone blended cement. Cement and Concrete Research, 30(5), 703-708.

[2]. Bureau of Indian Standards. (2000). Plain and reinforced concrete-code of practice (IS 456:2000). New Delhi, India.

[3]. Celik, T., & Marar, K. (1996). Effects of crushed stone dust on some properties of concrete. Cement and Concrete Research, 26(7), 1121-1130.

[4]. Eren, S., Khaled, K., Irassar, E. F., & Barai, S. V. (2007). Partial replacement using crusher stone dust. IE J-CV, 87, 2006.

[5]. Hameed, M. S., & Sekar, A. S. S. (2009). Quarry dust as replacement of fine aggregates in concrete. New Construction Materials, 52-56.

[6]. Ilangovan, R., & Nagamani, K. (2006). Studies on strength and behavior of concrete by using quarry dust as fine aggregate. CE and CR Journal, 40-42.

[7]. Katz, A., & Baum, H. (2006). Effect of high levels of fines content on concrete properties. ACI Materials Journal, 103(6), 474-482.

[8]. Lohani, T. K., Padhi, M., Dash, K. P., & Jena, S. (2012). Optimum utilization of quarry dust as partial replacement of sand in concrete. Int. J. Appl. Sci. Eng. Res, 1(2), 391-404.

If you have access to this article please login to view the article or kindly login to purchase the article

Single Article

	North Americas,UK, Middle East,Europe		India	Rest of world
	USD	EUR	INR	USD-ROW
Online	15	15

ADD TO CART

Options for accessing this content:

If you would like institutional access to this content, please recommend the title to your librarian.
If you already have i-manager's user account: Login above and proceed to purchase the article.
New Users: Please register, then proceed to purchase the article.