i-manager Publications

A Comparative Study on the Tool-Work Interface Temperature Observed during the Turning Operation of AISI 4340 Steel In Flooded, Near Dry, and Dry, Machining Conditions

Milon D. Selvam*, N. M. Sivaram**, M. Abisha Meji***

* Research Scholar, Department of Mechanical Engineering, Karpagam Academy of Higher Education, Coimbatore, Tamil Nadu, India.

** Assistant Professor, Department of Mechanical Engineering, National Institute of Technology (NIT) Puducherry, India.

*** PG Scholar, Department of Physics, Bharathiar University, Coimbatore, Tamil Nadu, India..

Periodicity:May - July'2018
DOI : https://doi.org/10.26634/jfet.13.4.14430

Abstract

The objective of this study is to analyze the effect of tool-work interface temperature observed during turning of AISI 4340 cylindrical steel components in three machining conditions, namely flooded, near-dry, and dry conditions with three separate CNMG-PEF 800 diamond finish Titanium Nitride (TiN) coated carbide cutting tool. The machining parameters considered in this study are cutting velocity, feed rate, and depth of cut. The experiments were planned based on full factorial design (3³) and executed in an All Geared Conventional Lathe. The tool-work interface temperature was observed using a K-type tool-work thermocouple while machining of steel and subsequently, a mathematical model was developed for the tool-work interface temperature values through regression analysis. The significance of the selected machining parameters and their levels on tool-work interface temperature is found by Analysis of Variance (ANOVA) and F-test. The results revealed that machining under near-dry condition exhibited lesser temperature at the tool-work interface, which is the sign of producing better quality products in equivalence with the machining under flooded condition.

Keywords

Turning, AISI 4340, Tool-work Interface Temperature, Flooded, Near-dry, Dry, Regression Analysis, Analysis of Variance (ANOVA)

How to Cite this Article?

Dennison, M. S., Sivaram, N. M., & Meji, M. A. (2018). A Comparative Study on the Tool-Work Interface Temperature Observed during the Turning Operation of AISI 4340 Steel In Flooded, Near Dry, and Dry, Machining Conditions. i-manager’s Journal on Future Engineering and Technology, 13(4), 34-45. https://doi.org/10.26634/jfet.13.4.14430

References

[1]. Astakhov, V. P. (2008). Ecological Machining: near-dry machining. In Machining: Fundamentals and Recent Advances (pp. 195-223). Springer, London.

[2]. Boswell, B., & Islam, M. N. (2013). The challenge of adopting minimal quantities of lubrication for end milling aluminium. In IAENG Transactions on Engineering Technologies (pp. 713-724). Springer, Dordrecht.

[3]. Boubekri, N., Shaikh, V., & Foster, P. R. (2010). A technology enabler for green machining: Minimum Quantity Lubrication (MQL). Journal of Manufacturing Technology Management, 21(5), 556-566.

[4]. Debnath, S., Reddy, M. M., & Yi, Q. S. (2014). Environmental friendly cutting fluids and cooling techniques in machining: A review. Journal of Cleaner Production, 83, 33-47.

[5]. Dennison. M. S., & Meji. M. A. (2018). A comparative study on the surface finish achieved during face milling of AISI 1045 Steel Components. i-manager's Journal on Mechanical Engineering, 8(2), 18-26.

[6]. Elmunafi, M. H. S., Kurniawan, D., & Noordin, M. Y. (2015). Use of castor oil as cutting fluid in machining of hardened stainless steel with minimum quantity of lubricant. Procedia CIRP, 26, 408-411.

[7]. Hamdan, A., Sarhan, A. A., & Hamdi, M. (2012). An optimization method of the machining parameters in high-speed machining of stainless steel using coated carbide tool for best surface finish. The International Journal of Advanced Manufacturing Technology, 58(1-4), 81-91.

[8]. Islam, M. N., Anggono, J. M., Pramanik, A., & Boswell, B. (2013). Effect of cooling methods on dimensional accuracy and surface finish of a turned titanium part. The International Journal of Advanced Manufacturing Technology, 69(9-12), 2711-2722.

[9]. Kurgin, S., Dasch, J. M., Simon, D. L., Barber, G. C., & Zou, Q. (2012). Evaluation of the convective heat transfer coefficient for minimum quantity lubrication (MQL). Industrial Lubrication and Tribology, 64(6), 376-386.

[10]. Lawal, S. A., Choudhury, I. A., & Nukman, Y. (2013). A critical assessment of lubrication techniques in machining processes: A case for minimum quantity lubrication using vegetable oil-based lubricant. Journal of Cleaner Production, 41, 210-221.

[11]. Le Coz, G., Marinescu, M., Devillez, A., Dudzinski, D., & Velnom, L. (2012). Measuring temperature of rotating cutting tools: Application to MQL drilling and dry milling of aerospace alloys. Applied Thermal Engineering, 36, 434- 441.

[12]. Leppert, T. (2011). Effect of cooling and lubrication conditions on surface topography and turning process of C45 steel. International Journal of Machine Tools and Manufacture, 51(2), 120-126.

[13]. Montgomery, D. C. (2008). Design and Analysis of Experiments. John Wiley & Sons.

[14]. Ozcelik. B., Kuram. E., Cetin. M. H., & Demirbas. E. (2011). Experimental investigations of vegetable based cutting fluids with extreme pressure during turning of AISI 304L. Tribology International, 44(12), 1864-1871.

[15]. Rahim, E. A., & Sasahara, H. (2011). An analysis of surface integrity when drilling inconel 718 using palm oil and synthetic ester under MQL condition. Machining Science and Technology, 15(1), 76-90.

[16]. Raynor, P. C., Kim, S. W., & Bhattacharya, M. (2005). Mist generation from metalworking fluids formulated using vegetable oils. Annals of Occupational Hygiene, 49(4), 283-293.

[17]. Ruibin, X., & Wu, H. (2016). Study on cutting mechanism of Ti6Al4V in ultra-precision machining. The International Journal of Advanced Manufacturing Technology, 86(5-8), 1311-1317.

[18]. Schwarz, M., Dado, M., Hnilica, R., & Veverková, D. (2015). Environmental and health aspects of metalworking fluid use. Polish Journal of Environmental Studies, 24(1), 37-45.

[19]. Selvam, M. D., & Senthil, P. (2016). Investigation on the effect of turning operation on surface roughness of hardened C45 carbon steel. Australian Journal of Mechanical Engineering, 14(2), 131-137.

[20]. Selvam, M. D., & Sivaram, N. M. (2017). The effectiveness of various cutting fluids on the surface roughness of AISI 1045 steel during turning operation using minimum quantity lubrication system. i-manager's Journal on Future Engineering and Technology, 13(1), 36- 43.

[21]. Selvam, M. D., Dawood, D. A. S., & Karuppusami, D. G. (2012). Optimization of machining parameters for face milling operation in a vertical CNC milling machine using genetic algorithm. IRACST-Engineering Science and Technology: An International Journal (ESTIJ), 2(4), 544-548.

[22]. Selvam, M. D., Senthil, P., & Sivaram, N. M. (2017). Parametric optimisation for surface roughness of AISI 4340 steel during turning under near dry machining condition. International Journal of Machining and Machinability of Materials, 19(6), 554-569.

[23]. Selvam, M. D., Srinivasan, V., & Sekar, C. B. (2014). An attempt to minimize lubricants in various metal cutting processes. International Journal of Applied Engineering Research, 9(22), 7688-7692.

[24]. Sharma, A. K., Tiwari, A. K., & Dixit, A. R. (2016). Effects of Minimum Quantity Lubrication (MQL) in machining processes using conventional and nanofluid based cutting fluids: A comprehensive review. Journal of Cleaner Production, 127, 1-18.

[25]. Singh, G., & Sharma, V. S. (2017). Analyzing machining parameters for commercially puretitanium (Grade 2), cooled using minimum quantity lubrication assisted by a Ranque-Hilsch vortex tube. The International Journal of Advanced Manufacturing Technology, 88(9- 12), 2921-2928.

[26]. Walker, T. (2015). A Guide to Machining with Minimum Quantity Lubrication. Unist, Inc.

	North Americas,UK, Middle East,Europe		India	Rest of world
	USD	EUR	INR	USD-ROW
Pdf	35	35	200	20
Online	35	35	200	15
Pdf & Online	35	35	400	25

A Comparative Study on the Tool-Work Interface Temperature Observed during the Turning Operation of AISI 4340 Steel In Flooded, Near Dry, and Dry, Machining Conditions

Abstract

Keywords

How to Cite this Article?

References

If you have access to this article please login to view the article or kindly login to purchase the article

Purchase Instant Access

Options for accessing this content: