i-manager Publications

Comparative Analysis of an SI Engine Block Using Al Alloy and Metal Matrix Composite

S. Aravind*, D. Sathish Kumar **, G. Vignesh***

*-*** Assistant Professor, Department of Mechanical Engineering, Karpagam Academy of Higher Education, Coimbatore, Tamil Nadu, India.

Periodicity:August - October'2018
DOI : https://doi.org/10.26634/jme.8.4.14296

Abstract

To increase the life, fuel economy and efficiency of an automobile engine, the researches are being done on the use of different materials. Material selection for an engine depends on various factors. The life of the engine with the material which is capable of giving higher efficiency and fuel economy can be determined with the help of thermal analysis. This paper deals with the thermal analysis of a SI engine block using two different materials; Al alloy 6061 and a metal matrix composite (Al alloy+ 20 % SiC). The engine block was modeled using Pro-E and the thermal analysis was done using ANSYS. The thermal stress, thermal flux and thermal gradient of two different materials have been analyzed. It has been found that the Metal Matrix composite (MMC) has less thermal stress and thermal gradient compared to Al alloy.

Keywords

ANSYS, Metal Matrix Composites, Thermal Stress, Thermal Flux, Thermal Gradient.

How to Cite this Article?

Aravind, S., Kumar, D. S., and Vignesh, S. (2018). Comparative Analysis of an SI Engine Block Using Al Alloy and Metal Matrix Composite. i-manager’s Journal on Mechanical Engineering, 8(4), 25-30. https://doi.org/10.26634/jme.8.4.14296

References

[1]. Bovo, M. (2014). Principles of heat transfer in Internal Combustion Engines from a Modeling Standpoint (Doctoral Dissertation, Chalmers University of Technology).

[2]. Grosselle, F., Timelli, G., Bonollo, F., Molina, R., & Aluminum, T. (2010). Correlation between microstructure and mechanical properties of Al-Si diecast engine blocks. Metallurgical Science and Technology, 27(2), 2-10.

[3]. Kheder, A. R. I., Marahleh, G. S., & Al-Jamea, D. M. K. (2011). Strengthening of Aluminum by SiC, Al₂O₃ and MgO. Jordan Journal of Mechanical & Industrial Engineering, 5(6), 533-541.

[4]. Kumar, G. V., Rao, C. S. P., Selvaraj, N., & Bhagyashekar, M. S. (2010). Studies on Al 6061-SiC and Al 7075-Al₂O₃ Metal Matrix Composites. Journal of Minerals and Materials Characterization and Engineering, 9(01), 43-55.

[5]. Leard, B., Linn, J., & McConnell, V. (2017). Fuel prices, new vehicle fuel economy, and implications for attribute-based standards. Journal of the Association of Environmental and Resource Economists, 4(3), 659-700.

[6]. Lenny, J. (2011). Replacing the cast iron liners for Aluminum engine cylinder blocks: A comparative assessment of potential candidates (Masters Thesis, Rensselaer Polytechnic Institute Hartford, Connecticut).

[7]. Mon, T. T., Mamat, R., & Iaeng, N. K. (2011, July). Thermal analysis of SI Engine using simplified finite element model. In Proceedings of the World Congress on Engineering (Vol. 3, pp. 6-8).

[8]. Navthar, R. R., & Narwade, P. A. (2012). Design and analysis of Cylinder and Cylinder head of 4-stroke SI Engine for weight reduction. International Journal of Engineering Science and Technology, 4(03), 847-853.

[9]. Prabhala, S. K., & Kumar, K. S. R. (2012). Design and weight optimization of IC engine. International Journal of Advanced Engineering Research and Studies (IJAERS), 2(1), 56-58.

[10]. Singh, R., Sharma, Y., & Sharma, V. (2014). Examine of mechanical properties of Al 6061/SiC Metal Matrix Composites. International Journal for Research Publication & Seminar, 5(3).

[11]. Vinoth, M. A., Arun, L. R., & Patil, B. (2014). The fabrication process and mechanical characterization of pure Al-Si MMC's for engine applications, International Journal of Innovative Research in Science, Engineering and Technology, 3(6), 13514-13521.

[12]. Ye, H. (2003). An overview of the development of Al-Si-alloy based material for engine applications. Journal of Materials Engineering and Performance, 12(3), 288-297.

Comparative Analysis of an SI Engine Block Using Al Alloy and Metal Matrix Composite

Abstract

Keywords

How to Cite this Article?

References

If you have access to this article please login to view the article or kindly login to purchase the article

Purchase Instant Access

Options for accessing this content:

	North Americas,UK, Middle East,Europe		India	Rest of world
	USD	EUR	INR	USD-ROW
Pdf	35	35	200	20
Online	35	35	200	15
Pdf & Online	35	35	400	25