A Pedal-Assisted E-bike Model

Chandrakant Chandrawanshi*, Deepak Kumar**, Mayank Tiwari***, Shivendra Singh****, Utkarsh Dubey*****
*_***** UG Graduate, Department of Electrical Engineering, Bharati Vidyapeeth College of Engineering, Pune, Maharashtra, India.
Periodicity:July - September'2018
DOI : https://doi.org/10.26634/jee.12.1.14242

Abstract

The goal of this research paper is to promote the use of clean energy by incorporating it into a bicycle. In today's fast forwarding world where one is always in transit from one place to another, has greatly exploited the conventional energy resources, thus compromising environment as well as one's own physical health. Hence this paper not only aims at utilizing a clean energy source but also promote a healthy lifestyle in such a busy world. Our project “pedal assisted ebicycle” allows the rider to make use of an electric motor providing a higher speed and comfort along with pedaling at a more even terrain. Current scenario of use of e vehicles has greatly diverted the attention of the people towards adopting such means of transport thereby increasing the chances of success of our project.

Keywords

Motor Controller, Installation Equipment

How to Cite this Article?

Chandrawanshi, C., Kumar, D.,Tiwari, M., Singh, S., and Dubey, U. (2018). Bicycle of Upcoming Future E-Bike. i-manager’s Journal on Electrical Engineering,12(1), 41-45. https://doi.org/10.26634/jee.12.1.14242

References

[1]. Arsie, I., Rizzo, G., & Sorrentino, M. (2006, August). Optimal design of a hybrid solar vehicle. In AVEC (Vol. 6, pp. 20-24).
[2]. Cong, R., Martinez, R., Casilang, M., & Vong, P. (2010). Electric Bicycle System. Senior Project California Polytechnic State University, San Luis Obispo.
[3]. Ehsani, M., Gao, Y., Longo, S., & Ebrahimi, K. (2018). Modern Electric, Hybrid Electric, and Fuel Cell Vehicles. CRC Press.
[4]. Faria, N., Trovao, J. P., Ramos, A. F., & Pereirinha, P. G. (2014, October). Comparison of different battery technologies for electric minibuses using energetic macroscopic representation. In Vehicle Power and Propulsion Conference (VPPC), 2014 IEEE (pp. 1-6). IEEE.
[5]. Gaines, L. (2014). The future of automotive lithium-ion battery recycling: Charting a sustainable course. Sustainable Materials and Technologies, 1, 2-7.
[6]. Goodman, J. D. (2010). An Electric Boost for Bicyclists. New York Times, B1.
[7]. Muetze, A., & Tan, Y. C. (2007). Electric bicycles - A performance evaluation. IEEE Industry Applications Magazine, 13(4), 12-21.
[8]. Tremblay, O., & Dessaint, L. A. (2009). Experimental validation of a batter y dynamic model for EV applications. World Electric Vehicle Journal, 3(2), 289- 298.
[9]. Vinatha, U., Pola, S., & Vittal, K. P. (2008, November). Simulation of four quadrant operation & speed control of BLDC motor on MATLAB/Simulink. In TENCON 2008-2008 IEEE Region 10 Conference (pp. 1-6). IEEE.
[10]. Wilson, D. G. (2004). Bicycle Science, 3rd Ed. The MIT Press, Cambridge, Massachussets.
If you have access to this article please login to view the article or kindly login to purchase the article

Purchase Instant Access

Single Article

North Americas,UK,
Middle East,Europe
India Rest of world
USD EUR INR USD-ROW
Pdf 35 35 200 20
Online 35 35 200 15
Pdf & Online 35 35 400 25

Options for accessing this content:
  • If you would like institutional access to this content, please recommend the title to your librarian.
    Library Recommendation Form
  • If you already have i-manager's user account: Login above and proceed to purchase the article.
  • New Users: Please register, then proceed to purchase the article.