References
[1]. Haddad, M. J., & Tehrani, A. F. (2008). Material removal
rate (MRR) study in the cylindrical wire electrical discharge
turning (CWEDT) process. Journal of Materials Processing
Technology, 199(1-3), 369-378.
[2]. Hasani, H., Tabatabaei, S. A., & Amiri, G. (2012). Grey
relational analysis to determine the optimum process
parameters for open-end spinning yarns. Journal of Engineered Fibers and Fabrics, 7(2), 81-86.
[3]. Krishnan, S. A., & Samuel, G. L. (2013). Multi-objective
optimization of material removal rate and surface
roughness in wire electrical discharge turning. The
International Journal of Advanced Manufacturing
Technology, 67(9-12), 2021-2032.
[4]. Kumar, K., & Ravikumar, R. (2013). Modeling and
optimization of wire EDM process. International Journal of
Modern Engineering Research, 3(3), 1645-1648.
[5]. Manjaiah, M., Narendranath, S., Basavarajappa, S., &
Gaitonde, V. N. (2014). Wire electric discharge machining
characteristics of titanium nickel shape memory alloy.
Transactions of Nonferrous Metals Society of China, 24(10),
3201-3209.
[6]. Muthuramalingam, T., & Mohan, B. (2013). Taguchigrey
relational based multi response optimization of
electrical process parameters in electrical discharge
machining. Indian Journal of Engineering and Material
Science, 20, 471-475.
[7]. Naik, G. M., & Narendranath, S. (2017). A parametric
optimization of wire-ED turning process parameters on
material removal rate of INCONEL 718. Journal of
Mechanical Engineering and Biomechanics, 2(2), 8-14,
DOI: https:/doi.org/10/24243/JMEB
[8]. Nayak, S., & Routara, B. C. (2014). Optimization of
Multiple Performance Characteristics in Electro Discharge
Machining using Grey Relational Analysis. International
Journal of Scientific & Technology Research, 3(4), 116-121
[9]. Pawar, K., & Palhade, R. D. (2015). Multi-objective
Optimization of CNC Turning Process Parameters for High
Speed Steel (M2) Using Taguchi and ANOVA Method.
International Journal of Hybrid Information Technology,
8(4), 67-80.
[10]. Raghuraman, S., Thiruppathi, K., Panneerselvam, T., &
Santosh, S. (2013). Optimization of EDM parameters using
Taguchi method and grey relational analysis for mild steel IS
2026. International Journal of Innovative Research in
Science, Engineering and Technology, 2(7), 3095-3104.
[11]. Rai, K. B., & Dewan, P. R. (2014). Parametric
optimization of WEDM using grey relational analysis with
Taguchi method. International Journal of Research in Engineering & Technology, 2(8), 109-116.
[12]. Rajyalakshmi, G., & Ramaiah, D. P. V. (2012).
Simulation, Modelling and Optimization of Process
parameters of Wire EDM using Taguchi–Grey Relational
Analysis. International Journal of Advanced and Innovative
Research.
[13]. Rajyalakshmi, G., & Ramaiah, P. V. (2015). Application
of Taguchi, fuzzy-grey relational analysis for process
parameters optimization of WEDM on Inconel-825. Indian
Journal of Science and Technology, 8(35), 1-12.
[14]. Rathi, M. G., & Mane, D. V. (2014). Study on effect of
Powder Mixed dielectric in EDM of Inconel 718. International
Journal of Scientific and Research Publications, 4(11), 1-7.
[15]. Selvam, M. D., Dawood, D. A. S., & Karuppusami, D.
G. (2012). Optimization of machining parameters for face
milling operation in a vertical CNC milling machine using
genetic algorithm. IRACST-Engineering Science and
Technology: An International Journal (ESTIJ), 2(4), 544-548.
[16]. Sharma, P., Chakradhar, D., & Narendranath, S.
(2015). Evaluation of WEDM performance characteristics
of Inconel 706 for turbine disk application. Materials &
Design, 88, 558-566.
[17]. Singh, P. N., Raghukandan, K., & Pai, B. C. (2004).
Optimization by Grey relational analysis of EDM parameters
on machining Al–10% SiCP composites. Journal of
Materials Processing Technology, 155, 1658-1661.
