i-manager Publications

Microwave Cladding: A New Surface Engineering Technique for Developing Uniform Microstructure

Dheeraj Gupta*, Apurbba Kumar Sharma**

* Department of Mechanical and Industrial Engineering, Indian Institute of Technology Roorkee, India.

** Assistant Professor, Department of Mechanical and Industrial Engineering, Indian Institute of Technology Roorkee, India.

Periodicity:February - April'2011
DOI : https://doi.org/10.26634/jme.1.2.1403

Abstract

Demand for production of durable mechanical components at lower cost has been on the rise. Mechanical components subjected to aggressive conditions suffer from degradation of surface properties through several modes like wear, corrosion, and oxidation. The challenge to the industries is to develop wear resistant coatings with good surface properties in a shorter processing duration. In the present work an innovative process has been explored for development of metallic cladding. A Ni based cladding has been developed on austenitic stainless steel substrate (SS—316) by the exposure of microwave irradiation. The microwave hybrid heating technique has been used for the development of cladding. The developed clads have been characterized through X—ray diffraction (XRD), field emission scanning electron microscope (FE—SEM), and Vicker’s microhardness. The clad of thickness ~1mm has been developed using microwave radiation of power 900W at 2.45GHz frequency for the duration of 360s. The XRD results revealed the precipitation of chromium carbide in the developed clad with other phases of NiSi and FeNi3. The transverse section of developed cladding shows good metallurgical bonding with substrate by partial mutual diffusion of elements. The clad is free from cracks and has significantly less porosity (1.01%). The average microhardness of developed clad is ~300Hv.

Keywords

Microwave; Hybrid heating, Ni based cladding, Austenitic stainless steel, Cellular microstructure.

How to Cite this Article?

Dheeraj Gupta and A K Sharma (2011). Microwave Cladding: A New Surface Engineering Technique For Developing Uniform Microstructure. i-manager’s Journal on Mechanical Engineering, 1(2), 17-23. https://doi.org/10.26634/jme.1.2.1403

References

[1]. John C. Ion,(2005). Laser Processing of Engineering materials, Elsevier/Butterworth-Heinemann, Oxford ISBN: 0-7506-6079-1.

[2]. Khanna, A.S., Kumari, S., Kanungo, S., Gasser, A. (2009). Hard coatings based on thermal spray and laser cladding. Int. J. Refract. Met. Hard Mater, 27, 485-491

[3]. Gupta, Dheeraj, Paul, C.P., Gandhi, Bhupendra K., Gupta, S.R., Nath, A.K. (2008). “Wear Behavior Of Laser Clad Surfaces Of Cr3C2, WC And Mo On Austenitic AISI 304L Steel”. Journal of Laser Application, 20 (3), 140-145.

[4]. Sharma, A.K., Gupta Dheeraj, (2010). “A method of cladding/coating of metallic and non-metallic powders on metallic substrates by microwave irradiation”. Indian patent application no. 527/Del.

[5]. Gupta, D., Sharma, A.K. (2011). “Investigation on sliding wear performance of WC10Co2Ni cladding developed through microwave irradiation”, Wear, doi:10.1016 /j. wear. 2010.12.037.

[6]. Gupta, Dheeraj, Sharma, A. K. (2011). “On Development and Performance of Microwave Induced Metal-Ceramic Composite Cladding”, Proceedings of an International Conference on Processing and Fabrication of Advanced Materials XIX, Auckland, New Zealand, 90-101.

[7]. Sharma, A.K., Aravindhan, S., Krishnamurthy, R. (2001). “Microwave glazing of alumina–titania ceramic composite coatings”. Mater. Lett., 50, 295–301.

[8]. Clark, David E., Sutton, Willard H. (1996). “Microwave Processing of Materials”. Annu. Rev. Mater Sci., 26, 299-331.

[9]. Clark, David E., Folz, Diane C., West, Jon K. (2000). “Processing Materials with Microwave Energy”. Mater. Sci. Eng. A, 287, 153–158.

[10] . Cheng, J., Agrawal, D., Zhang, Y., Roy, R., (2001). “Microwave Reactive Sintering to Fully Transparent Aluminum Oxynitride (ALON) Ceramics”. J. of Mater. Sci. Lett. 20, 77-79.

[11]. Fisher, J.G., Woo, S.K., Bai, K. (2003). “Microwave reaction bonding of silicon nitride using an inverse temperature gradient and ZrO2 and Al2O3 sintering additives”. J. Eur. Ceram. Soc., 23, 791–799.

[12]. Fang, Chris Y., Randal, Clive A., Lanagan, Michael T., Agrawal, Dinesh K. (2009). “Microwave processing of electroceramic materials and devices”. J. Electroceram, 22, 125–130.

[13]. Leonelli, C., Veronesi, P., Denti, L., Gatto, A., Iuliano, L. (2008). “Microwave assisted sintering of green metal parts”. J. Mater. Process. Technol., 205, 489–496.

[14]. Gupta, Dheeraj, Sharma, A K (2010). “A Green Approach to Development and Characterization of Thin Copper Coating On Austenitic Stainless Steel”. Proceedings of International Conference on Frontiers in Mechanical Engineering (FIME), NIT Suratkal. India, 439-444.

[15]. Thostenson, E.T., Chou, T.-W. (1999). Microwave processing: fundamentals and applications. Composites: Part A, 30, 1055–1071.

[16]. Gupta, Dheeraj, Sharma, A. K. (2010). “Development of erosion resistant cladding on austenitic stainless steel through microwave heating”. Proceedings of the third international and twenty fourth all India manufacturing technology design and research conference (AIMTDR), Andhra University, India, 1029-1034.

[17]. Roy, R., Agrawal, D., Cheng, J., Gedevanishvili, S. (1999). Full sintering of powdered-metal bodies in a microwave field. Nature, 339, 668–70.

[18]. Saitou, K. (2006). “Microwave sintering of iron, cobalt, nickel, copper and stainless steel powders”. Scr. Mater., 54, 875–879.

[19]. Panda, S.S., Singh, V., Upadhyaya, A., Agrawal, D. (2006). “Sintering response of austenitic (316L) and ferritic (434L) stainless steel consolidated in conventional and microwave furnaces”. Scr. Mater., 54, 2179–2183.

[20]. Chhillar, P., Agrawal, D., Adair, J. H. (2008). “Sintering of molybdenum metal powder using microwave energy”. Powder Metallurgy, 51-2, 182-187.

[21]. Mondal, A., Upadhyaya A., Agrawal, D. (2009). “Microwave Sintering of W-18Cu and W-7Ni3Cu Alloys”. J. Microwave Power Electromagn. Energy, 43-1, 11-16.

[22]. Cho, Seungyoun, Lee, Joonho (2008). “Metal recovery from stainless steel mill scale by microwave heating”. Met. Mater. Int., 14(2), 193-196.

[23]. Takayama, Sadatsugu, Link, Guido, Matsubara, Akihiro, Sano, Saburo, Sato, Motoyasu, Thumm, Manfred (2008). “Microwave Frequency Effect for Reduction of Magnetite”. Plasma and Fusion Research: Regular Articles, 3, S1036-1-4.

[24]. Borneman, Karl lee, Saylor, Matthew David (2008). “Microwave process for forming a coating”. US patent no. 0138533A12008.

[25]. Sharma, A. K., Srinath, M. S., Kumar, Pradeep (2009). “Microwave joining of metallic materials”. Indian patent application no. 1994/Del/2009.

[26]. Srinath, M. S., Sharma, A. K. , Kumar, Pradeep (2011). “A new approach to joining of bulk copper using microwave energy”. Mater. Des. 32 (5), 2685-2694.

[27]. Mondal, A., Shukla, A., Upadhyaya, A., Agrawal, D. (2010). “Effect of porosity and particle size on microwave heating of copper”. Science of Sintering, 42, 169-182.

	North Americas,UK, Middle East,Europe		India	Rest of world
	USD	EUR	INR	USD-ROW
Pdf	35	35	200	20
Online	35	35	200	15
Pdf & Online	35	35	400	25

Microwave Cladding: A New Surface Engineering Technique for Developing Uniform Microstructure

Abstract

Keywords

How to Cite this Article?

References

If you have access to this article please login to view the article or kindly login to purchase the article

Purchase Instant Access

Options for accessing this content: