i-manager Publications

Thermo-Elastic Damping In MEMS Resonators- An Overview

V. Vasu*, T. Abhinav**

* Assistant Professor, Department of Mechanical Engineering, National Institute of Technology, Warangal.

** Research Scholar, Department of Mechanical Engineering, National Institute of Technology, Warangal.

Periodicity:February - April'2011
DOI : https://doi.org/10.26634/jme.1.2.1401

Abstract

The catching trend of using MEMS (Micro-Electro Mechanical System) devices in several crucial applications has mediated the need of careful investigation into the mechanisms that affect the performance of these devices. Dissipation of energy through damping is one such aspect that is important in devices using vibrating structures. For high Q MEMS resonators that are operated in vacuum, Thermo-Elastic Damping (TED) is a fundamental & crucial dissipation mechanism. In the present contribution, a brief overview has been presented to provide an update on the historical evolution of this concept- starting from identification of this phenomenon to an important source of internal friction, development of the set of governing equations, to extending the theory to Non-Fourier heat conduction. Prominent effects of the design factors such as the operating frequency of the device, its shape & size, material etc. on the Thermo-elastic damping have been explored & presented here. Approach for minimizing such dissipation has also been suggested for improving the Q-factor of the devices.

Keywords

MEMS, Resonators, Thermo-Elastic Dampening.

How to Cite this Article?

V. Vasu and T. Abhinav (2011). Thermo-Elastic Damping In Mems Resonators- An Overview. i-manager’s Journal on Mechanical Engineering, 1(2), 1-8. https://doi.org/10.26634/jme.1.2.1401

References

[1]. Maluf Nadim, “An Introduction to Microelectro mechanical Engineering”, Artech House Publishers.

[2]. Bao M,(2005). “Analysis & Design Principles of MEMS Devices”, Elsevier.

[3]. Chang Lui, (2005). “Foundations of MEMS”, Illinois ECE series, Pearson Education Inc.

[4]. Bryzek J,(1996). “Impact of MEMS technology on Society”, Sensors & Actuators A: Physical, Volume 56/1-2, 1-9.

[5]. Van Herwaarden A.W., Sarro P.M.,(1986). “Thermal Sensors Based on the Seebeck Effect”, Sensors & Actuators, Volume 10, 321-346.

[6]. Deok-Ho Kim , Byungkyu Kim,(2004). “Implementation of a Piezoresistive MEMS Cantilever for Nanoscale Force Measurements in Micro/Nano Robotic applications”, KSME International Journal, Vol 18, No. 5, 789-797.

[7]. Robert Bogue, (2009). “MEMS Sensors: Past, Present & Future”, Sensor Review, Volume 27/1, 7-13.

[8]. Que L, Park Jae-Sung, (2001). “Bent-Beam Electrothermal Actuators- Part 1: Single Beam & Cascaded Devices”, Journal of Micromechanics & Microengineering, Volume 10, No. 2.

[9]. Lai Y, McDonald J, (2004). “Force, Deflection & Power Measurements of Toggled Microthermal Actuators”, Journal of Micromechanics & Microengineering, Vol. 14, 49-56.

[10]. Eddy D.S., Sparks D.R.,(1998). “Application of MEMS technology in Automotive Sensors & Actuators” IEEE Proceedings, Vol. 86/8, 1747-1755.

[11]. Lijie Li, Begbie M,(2007). “Design, Simulation & Characterization of MEMS Optical Scanner”, Journal of Micromechanics & Microengineering, Vol. 17, 1781-1787.

[12]. Jenkins C, Brown G,(2006). “Mircoelctromechanical Systems Actuated Small-scale Retro-reflectors for Free Space Optical Communications”, Journal of Optics A: Pure & Applied Optics, Vol. 8, S384-S390.

[13]. Thaysen J, Yalcinkaya A.D.,(2002). “Polymer-based Stress Sensor with Integrated Readout”, Journal of Physics D: Applied Physics, Vol. 35, 2698-2703.

[14]. Thysen J,(2001). “Cantilever for Bio-Chemical Sensing Integrated in a Microliquid Handling System”, Ph.D. Thesis, Technical University of Denmark.

[15]. Villarroya M, Verd Jaume,(2006). “System- On- Chip Mass Sensor Based on Polysilicon Cantilever Arrays for Multiple Detection”, Sensors & Actuators A:Physical, Vol 132, No. 1, 154-164.

[16]. Starr J.B.,(1990). “Squeeze Film Damping in Solid State Accelerometers”, Solid State Sensor & Actuator Workshop Technical Digest, No. 4, 44-47.

[17]. Hao Zhili, Erbil Ahmet,(2003). “An Analytical model for Support Loss in Micromachined Beam Resonators with In-plane Flexural Vibrations”, Sensors & Actuators A, 109, 156-164.

[18]. Yasumura K.Y., Stowe T.D.,(2000) “Quality Factors in Micron & Sub-micron Thick Cantilevers”, Journal of Micomechanical Systems, Vol. 9, No.1.

[19]. Acar C,(2009). “MEMS Vibratory Gyroscopes: Structural Approaches to Improve Robustness”, Springer.

[20]. Zener C.,(1940). “Internal Friction in Solids”, Proceedings of the Physical Society, Vol. 52, No. 1, 152-166.

[21]. Zener C, (1937). “Internal friction in solids I. Theory of internal friction in reeds.” Physical Review, Vol. 52, 230-235.

[22]. Meirovitch L,(2007). “Elements of Vibration Analysis”, Tata McGraw Hill.

[23]. Zener C.,(1946). “Anelasticity of Metals”, A.I.M.E Chicago Meeting, Feb 1946.

[24]. Zener C (1948). “Elasticity & Anelasticity of Metals”, Chicago University Press.

[25]. Zener C,(1938). “Internal Friction in Solids II. General Theory of Thermoelastic Internal Friction", Physical Review, Vol 53, 90–99.

[26]. Zener C, Otis W,(1938). “Internal Friction in Solids III. Experimental Determination of Thermoelastic Internal Friction", Physical Review, Vol 53, 100-101.

[27]. Hofmann P, (2008). “Solid State Physics: An introduction”, Wiley.

[28]. Ron Lifshitz, M. L. Roukes (2000). "Thermoelastic damping in micro- and nanomechanical systems" Phys. Rev. B 61, 5600–5609.

[29]. Timoshenko S.P., Goodier J.N.,(1951). “Theory of Elasticity”, McGraw Hill.

[30]. Martin H. Sadd, (2005). “Elasticity: Theory, Application & Numerics”, Elsevier- Butterworth Heinemann.

[31]. John P. Gorman,(2002). “Finite Element Model of Thermoelastic Damping in MEMS”, M.S. dissertation, MIT.

[32]. Tian X., Shen Y.,(2006). “A Direct Finite Element Method Study of Generalized Thermoelastic Problems”, International Journal of Solids & Stuctures, Vol. 43, No. 7-8, 2050-2063.

[33]. Carter J.P., Booker J.R., (1989). “Finite Element Analysis of Coupled Thermoelasticity”, Computers & Structure, Vol. 31, No. 1, 73-80.

[34]. Ardito R., Comi, C.,(2009). “Thermoelastic damping in layered micromechanical resonators” Aimeta 2009 XIX Congresso Associazione Italiana di Meccanica Teorica e Applicata, 2801 – 28010.

[35]. Sun Y., Fang D.(2006). ”Thermoelastic damping in micro beam resonators”, Solids & Structure, Vol. 43, 3212-3229.

Thermo-Elastic Damping In MEMS Resonators- An Overview

Abstract

Keywords

How to Cite this Article?

References

If you have access to this article please login to view the article or kindly login to purchase the article

Purchase Instant Access

Options for accessing this content:

	North Americas,UK, Middle East,Europe		India	Rest of world
	USD	EUR	INR	USD-ROW
Pdf	35	35	200	20
Online	35	35	200	15
Pdf & Online	35	35	400	25