i-manager Publications

Cross Coupled Band-Pass Filter Using Dual Square Complementary Split Ring ResonatorFor Wireless Communication

Aviral Verma*, Manish Kumar**

* PG Scholar, Department of Electronics and Communication Engineering, Madan Mohan Malaviya University of Technology, Gorakhpur (U.P.), India.

** Associate Professor, Department of Electronics and Communication Engineering, Madan Mohan Malaviya University of Technology, Gorakhpur (U.P), India.

Periodicity:November - January'2018
DOI : https://doi.org/10.26634/jcs.7.1.13956

Abstract

This paper proposes a wide pass-band filter using combination of transmission lines and square resonator structures arranged in symmetrical fashion, for numerous wide band applications. Dual-Square Complementary Split Ring Resonators with permittivity of 2.65 are identified to contribute for wider bandwidth of the filter. This novel approach enhances the coupling phenomenon and also reduces the insertion loss in the spectrum of passband. To demonstrate the advantages and practicality of this approach at the preferred band, the return and insertion losses of the filter were scrutinized. Band-pass filters play a considerable role in wireless sector. Frequency selection plays a central role in filtering. Signals have to be filtered at a specific center frequency with certain bandwidth during acquisitions. Cross dualparallel coupling at the arms provide better results in terms of frequency selectivity, rejection rates, fraction band width, and Q-factor along with low average insertion losses in comparison to other filtering techniques.

Keywords

Band-Pass Filter (BPF), Dual-Parallel Coupling, Dual-Square Complementary Split Ring Resonator, Passband

How to Cite this Article?

Verma, A., and Kumar, M. (2018). Cross Coupled Band-Pass Filter Using Dual Square Complementary Split Ring Resonator for Wireless Communication. i-manager’s Journal on Communication Engineering and Systems, 7(1), 1-5. https://doi.org/10.26634/jcs.7.1.13956

References

[1]. Alaydrus, M. (2010). Designing microstrip bandpass filter at 3.2 GHz. International Journal on Electrical Engineering and Informatics, 2(2), 71-83.

[2]. Bonache, J., Posada, G., Carchon, G., De Raedt, W., & 2 Martín, F. (2007). Compact (< 0.5 mm ) K-band metamaterial bandpass filter in MCM-D technology. Electronics letters, 43(5), 288-290.

[3]. Chang, K. (1996). Microwave Ring Circuits and Antennas (Book). New York: John Wiley & Sons, Inc, 1996.

[4]. Chiou, Y. C., Kuo, J. T., & Cheng, E. (2006). Broadband Quasi-Chebyshev bandpass filters with multimode stepped-impedance resonators (SIRs). IEEE Transactions on Microwave Theory and Techniques, 54(8), 3352-3358.

[5]. Chu, Q. X. & Tian, X. K. (2010). Design of UWB bandpass filter using stepped-impedance stub-loaded resonator. IEEE Microwave and Wireless Components Letters, 20(9), 501-503.

[6]. Chu, Q. X., Wu, X. H., & Tian, X. K. (2011). Novel UWB bandpass filter using stub-loaded multiple-mode resonator. IEEE Microwave and Wireless Components Letters, 21(8), 403-405.

[7]. Darwis, F. & Permana, D. (2012). Design and Simulation of 456 MHz Bandpass Filter for Radar System. In th Proceedings 6 National Radar Seminar and International Conference on Radar, Antenna, Microwave, Electronics and Telecommunications (ICRAMET). Bali.

[8]. Deng, H. W., Zhao, Y. J., Zhang, L., Zhang, X. S., & Gao, S. P. (2010). Compact quintuple-mode stub-loaded resonator and UWB filter. IEEE Microwave And Wireless Components Letters, 20(8), 438-440.

[9]. Gao, M. J., Wu, L. S., & Mao, J. F. (2012). Compact notched ultra-wideband bandpass filter with improved outof- band performance using quasi electromagnetic bandgap structure. Progress In Electromagnetics Research, 125, 137-150.

[10]. Hong, J. S. G. & Lancaster, M. J. (2004). Microstrip filters for RF/microwave applications (Vol. 167). John Wiley & Sons.

[11]. Kuo, J. T. & Lai, S. W. (2012). New dual-band bandpass filter with wide upper rejection band. Progress In Electromagnetics Research, 123, 371-384.

[12]. Kuo, J. T., Shih, E., & Lee, W. C. (2001). Design of bandpass filters with parallel three-line coupled microstrips. In Microwave Conference, 2001. APMC 2001. 2001 Asia- Pacific (Vol. 1, pp. 157-160). IEEE.

[13]. La, D. S. & Han, W. H. (2016). Compact wideband band-pass filter using microstrip parallel-coupled line structure with complementary split ring resonator. In Microwave and Millimeter Wave Technology (ICMMT), 2016 IEEE International Conference on (Vol. 1, pp. 360- 362). IEEE.

[14]. Lopetegi, T., Laso, M. A., Hernandez, J., Bacaicoa, M., Benito, D., Garde, M. J., ... & Guglielmi, M. (2001). New microstrip" wiggly-line" filters with spurious passband suppression. IEEE Transactions on Microwave Theory and Techniques, 49(9), 1593-1598.

[15]. Nguyen, C. (1994). New compact wideband bandpass filter using three parallel-coupled lines. Electronics Letters, 30(25), 2149-2150.

[16]. Pendry, J. B., Holden, A. J., Robbins, D. J., & Stewart, W. J. (1999). Magnetism from conductors and enhanced nonlinear phenomena. IEEE Transactions on Microwave Theory and Techniques, 47(11), 2075-2084.

[17]. Schwindt, R. & Nguyen, C. (1994). Spectral domain analysis of three symmetric coupled lines and application to a new bandpass filter. IEEE Transactions on Microwave Theory and Techniques, 42(7), 1183-1189.

[18]. Shaman, H. N. (2012). New S-band bandpass filter (BPF) with wideband passband for wireless communication systems. IEEE Microwave and Wireless Components Letters, 22(5), 242-244.

[19]. Shaman, H., & Hong, J. S. (2007). Asymmetric parallelcoupled lines for notch implementation in UWB filters. IEEE Microwave and Wireless Components Letters, 17(7), 516- 518.

[20]. Srisathit, K., Worapishet, A., & Surakampontorn, W. (2010). Design of triple-mode ring resonator for wideband microstrip bandpass filters. IEEE Transactions on Microwave Theory and Techniques, 58(11), 2867-2877.

[21]. Sun, S. & Zhu, L. (2006). Capacitive-ended interdigital coupled lines for UWB bandpass filters with improved out-ofband performances. IEEE Microwave and Wireless Components Letters, 16(8), 440-442.

[22]. Wong, S. W. & Zhu, L. (2009). Quadruple-mode UWB bandpass filter with improved out-of-band rejection. IEEE Microwave and Wireless Components Letters, 19(3), 152- 154.

[23]. Wu, X. H., Chu, Q. X., Tian, X. K., & Ouyang, X. (2011). Quintuple-mode UWB bandpass filter with sharp roll-off and super-wide upper stopband. IEEE Microwave and Wireless Components Letters, 21(12), 661-663.

[24]. Zhu, L., Sun, S., & Menzel, W. (2005). Ultra-wideband (UWB) bandpass filters using multiple-mode resonator. IEEE Microwave and Wireless Components Letters, 15(11), 796- 798.

If you have access to this article please login to view the article or kindly login to purchase the article

Single Article

	North Americas,UK, Middle East,Europe		India	Rest of world
	USD	EUR	INR	USD-ROW
Online	15	15

ADD TO CART

Options for accessing this content:

If you would like institutional access to this content, please recommend the title to your librarian.
If you already have i-manager's user account: Login above and proceed to purchase the article.
New Users: Please register, then proceed to purchase the article.