References
[1]. Almasri, A. H., & Al-Waked, Q. F. (2016). Inspection and numerical analysis of an Ottoman railway bridge in Jordan. Advances in Materials Science and Engineering, 1. Article ID 9039483. doi:10.1155/2016/9039483.
[2]. Ataei, S. & Miri, A. (2016). Finite element model calibration of Babak bridge by dynamic load tests. In Proceedings of the 3rd Iranian International NDT Conference.
[3]. Ataei, S., Miri, A., & Tajalli, M. (2017). Dynamic load testing of a railway masonry arch bridge: A case study of Babak Bridge. Scientia Iranica. Transaction A, Civil Engineering, 24(4), 1834.
[4]. Behnamfar, F., & Afshari, M. (2013). Collapse analysis and strengthening of stone arch bridges against earthquake. International Journal of Architectural Heritage, 7(1), 1-25.
[5]. Costa, C., Arêde, A., Morais, M., & Aníbal, A. (2015). Detailed FE and DE modelling of stone masonry arch bridges for the assessment of load-carrying capacity. Procedia Engineering, 114, 854-861.
[6]. Domede, N., Sellier, A., & Stablon, T. (2013). Structural analysis of a multi-span railway masonry bridge combining in situ observations, laboratory tests and damage modelling. Engineering Structures, 56, 837-849.
[7]. Ercan, E., Alver, N., & Nuhoğlu, A. (2015). Evaluation of material properties by NDT methods and FEM analysis of a stone masonry arch bridge. Challenge Journal of Structural Mechanics, 1(4), 168-172.
[8]. Fanning, P. J., & Boothby, T. E. (2001). Threedimensional modelling and full-scale testing of stone arch bridges. Computers & Structures, 79(29-30), 2645-2662.
[9]. Gonen, H., Dogan, M., Karacasu, M., Ozbasaran, H., & Gokdemir, H. (2013). Structural failures in refrofit historical murat masonry arch bridge. Engineering Failure Analysis, 35, 334-342.
[10]. Grandjean, A., & Brühwiler, E. (2009). Load-bearing capacity of masonry arch bridges using a plastic model. Protection of Historical Buildings, 195-200.
[11]. IRICEN. (2009a). Inspection, Assessment, Repairs and Retrofitting of masonry arch bridges. Indian Railways Institute of Civil Engineering, Pune, India.
[12]. IRICEN. (2009b). Indian Railway Standard Code of Practice for the design and construction of masonry and plain concrete arch bridges (Arch Bridge Code). Indian Railways Institute of Civil Engineering, Pune, India.
[13]. Mahdikhani, M., Naderi, M., & Zekavati, M. (2016). Finite element modeling of the influence of FRP techniques on the seismic behavior of historical arch stone bridge. Computers and Concrete, 18(1), 99-112.
[14]. Milani, G., & Lourenço, P. B. (2012). 3D non-linear behavior of masonry arch bridges. Computers and Structures, 110-111, 133-150.
[15]. Molins, C., Casas, J., & Roca, P. (2007). Ultimate capacity of a curved multi-span arch bridge subjected to railway loads. In Proceedings 5th International Conference on Arch Bridges (pp. 593-600).
[16]. Raj, S. E., Srinivas, V., & Sakaria, P. E. (2014). Failure Behaviour of Masonry Arch Bridges using Finite Element Analysis. International Journal of Emerging Technology and Advanced Engineering, 4(11), 125-130.
[17]. RDSO. (2009). Bridge Rules, Research Designs and Standards Organization, Lucknow, India.
[18]. Reccia, E., Milani, G., Cecchi, A., & Tralli, A. (2014). Full 3D homogenization approach to investigate the behavior of masonry arch bridges: The Venice translagoon railway bridge. Construction and Building Materials, 66, 567-586.
[19]. Sabale V. D., Borgave M. D., & Joshi P. (2014). Non- Linear Finite Element Analysis of Deep Beam. International Journal of Engineering Research &Technology, 3(5), 2134- 2139
[20]. Sowmiya, L. S., Shahu, J. T., & Gupta, K. K. (2010, December). Three Dimensional Finite Element Analysis of Railway Track. In Proceedings of Indian Geotechnical Conference-2010, GEOtrendz, IIT Bombay (Vol. 2, pp. 909- 912).