References
[1]. Alcock, B., Cabrera, N. O., Barkoula, N. M., Reynolds,
C. T., Govaert, L. E., & Peijs, T. (2007). The effect of
temperature and strain rate on the mechanical properties
of highly oriented polypropylene tapes and allpolypropylene
composites. Composites Science and
Technology, 67(10), 2061-2070.
[2]. Babu, K. S., Basha, S. K. M., & Sreedhar, C. (2016).
Design and simulation of plastic Injection molding process
by using ANSYS. Anveshana's International Journal of
Research in Engineering and Applied. Sciences, 1(11),
100-110.
[3]. Bansal, S., Kumar, N., & Jindal, P. (2017). Effect of
MWCNT Composition on the Hardness of PP/MWCNT
Composites. Materials Today: Proceedings, 4(2), 3867-
3871.
[4]. Gupta, T. K., Singh, B. P., Dhakate, S. R., Singh, V. N., &
Mathur, R. B. (2013). Improved nanoindentation and
microwave shielding properties of modified MWCNT
reinforced polyurethane composites. Journal of Materials
Chemistry A, 1(32), 9138-9149.
[5]. Jandial, S., & Jindal, P. (2014). Review of carbon
nanotubes/poly (methyl methacrylate) composite
fabrication and mechanical characterization techniques.
Int. J. Res. Advent. Technol., 2(2).
[6]. Jindal, P., Goyal, M., & Kumar, N. (2013). Dynamic
impact absorption behaviour of glass coated with carbon
nanotubes. Journal of Surface Engineered Materials and
Advanced Technology, 3(4), 257–261.
[7]. Jindal, P., Pande, S., Sharma, P., Mangla, V.,
Chaudhury, A., Patel, D., et al, (2013). High strain rate
behavior of multi-walled carbon nanotubes–
polycarbonate composites. Composites Part B:
Engineering, 45(1), 417-422.
[8]. Jindal, P., Jyoti, J., & Kumar, N. (2016). Mechanical
characterization of ABS/MWCNT composites under static
and dynamic loading conditions. Journal of Mechanical
Engineering and Sciences, 10(3), 2288-2299.
[10]. Jyoti, J., Singh, B. P., Rajput, S., Singh, V. N., & Dhakate,
S. R. (2016). Detailed dynamic rheological studies of
multiwall carbon nanotube-reinforced Acrylonitrile
Butadiene Styrene Composite. Journal of Materials
Science, 51(5), 2643-2652.
[11]. Kamble, A. S., Surde, A. N. & Kulkarni, S. S. (2013).
Validation for plastic Injection mold design for automotive
switch housing through physical experimentation.
International Journal of Advance Engineering Research
and Studies, 3(1), 77–79.
[12]. Kelly, A. L., Woodhead, M., & Coates, P. D. (2005).
Comparison of injection molding machine performance.
Polymer Engineering & Science, 45(6), 857-865.
[13]. Malinauskas, A. (2001). Chemical deposition of
conducting polymers. Polymer, 42(9), 3957-3972.
[14]. Mianehrow, H., & Abbasian, A. (2017). Energy
monitoring of plastic injection molding process running with
hydraulic injection molding machines. Journal of Cleaner
Production, 148, 804-810.
[15]. Rathod, M. L., & Kokini, J. L. (2016). Extension rate distribution and impact on bubble size distribution in
Newtonian and non-Newtonian fluid in a twin screw corotating
mixer. Journal of Food Engineering, 169, 214-227.
[16]. Serban, D. A., Weber, G., Marsavina, L.,
Silberschmidt, V. V., & Hufenbach, W. (2013). Tensile
properties of semi-crystalline thermoplastic polymers:
Effects of temperature and strain rates. Polymer Testing,
32(2), 413-425.
[17]. Weng, Z., Wang, J., Senthil, T., & Wu, L. (2016).
Mechanical and thermal properties of ABS/montmorillonite
nanocomposites for fused deposition modeling 3D
printing. Materials & Design, 102, 276-283.
[18]. Zhang, H., Yao, Y., Zhu, D., Mobasher, B., & Huang, L.
(2016). Tensile mechanical properties of basalt fiber
reinforced polymer composite under varying strain rates
and temperatures. Polymer Testing, 51, 29-39.
[19]. Zhang, X., Wang, P., Zhou, Y., Li, X., Yang, E. H., Yu, T. X.,
& Yang, J. (2016). The effect of strain rate and filler volume
fraction on the mechanical properties of hollow glass
microsphere modified polymer. Composites Part B:
Engineering, 101, 53-63.
