References
[1]. Aboutcivil.com (2017). Typical Road Structure Cross
Section Details. Retrieved from http://www.aboutcivil.org/
road-structure-cross-section.html [Accessed 2017].
[2]. Chhabra, P., Katyal, P., & Gulati, V. (2011). Concurrent
design and prototyping of composite accelerator pedal.
International Journal of Advancements in Technology, 2(1),
561-576.
[3]. China Glass Network (2011). E-glass or C-glass
Chopped Strand Mat. Retrieved from http://www.glassin
china.com/product/productDisplay_325891.html
[4]. Dugoff, H., Fancher, P. S., & Segel, L. (1970). An analysis
of tire traction properties and their influence on vehicle
dynamic performance (No. 700377). SAE Technical Paper.
[5]. East Texas Asphalt Co., Ltd (n.d). Products | East Texas
Asphalt. Retrieved from http://www.etasphalt.com/products/
[6]. Hull, D., & Clyne, T. W. (1996). An Introduction to
Composite Materials. Cambridge university press.
[7]. IMI Tami (2011). Corrosion Testing. Retrieved from
http://www.tami-imi.com/corrosion-testing.
[8]. Muller, S., Uchanski, M., & Hedrick, K. (2003). Estimation
of the maximum tire-road friction coefficient. Journal of
Dynamic Systems, Measurement, and Control, 125(4),
607-617.
[10].Ootsuka02. (2016). Retrieved from
https://commons.wikimedia.org/ wiki/File:Beam_Stiffness.PNG
[11]. O'Brien, T. K. (1990). Towards a damage tolerance
philosophy for composite materials and structures. In Composite Materials: Testing and Design (Ninth Volume).
ASTM International.
[12]. Pickering, S., (2011). Recycling Thermoset
Composites. Retrieved from http://www.jeccomposites.
com/knowledge/international-composites-news/
recycling-thermoset-composites
[13]. Specht, L. P., Khatchatourian, O., Brito, L. A. T., &
Ceratti, J. A. P. (2007). Modeling of asphalt-rubber
rotational viscosity by statistical analysis and neural
networks. Materials Research, 10(1), 69-74.
[14]. The Constructor, (n.d)a. Asphalt, Bitumen and Tar –
Types, Difference and Comparison. Retrieved from
https://theconstructor.org/building/asphalt-bitumen-tartypes-
difference-comparison/17273/ [Accessed 2017].
[15]. The Constructor, (n.d)b. Geogrids - Types, Functions,
Applications and Advantages in Construction. Retrieved
from https://theconstructor.org/building/ geogrids-typesfunctions-
applications-advantages/15190/ [Accessed
2017].
[16]. West, R. C., Willis, J. R., & Marasteanu, M. O. (2013).
Improved mix design, evaluation, and materials
management practices for hot mix asphalt with high
reclaimed asphalt pavement content (Vol. 752).
Transportation Research Board.
[17]. Williams, M., (n.d). AF2903 Road Construction and
Maintenance Placement of Hot Mix Asphalt. Retrieved from
http://slideplayer.com/slide/ 5726674/ [Accessed 2017].
