References
[1]. Ahn, T. H., & Kishi, T. (2008). The effect of geo-materials
on the autogenous healing behavior of cracked concrete.
In Alexander, M. G. (Ed.), Concrete Repair, Rehabilitation
and Retrofitting II. Taylor & Francis Group, London.
[3]. Crouch, L. K., Hewitt, R., & Byard, B. (2007). High
volume fly ash concrete. World of Coal Ash (WOCA), (pp.1-
14). Kentucky, USA.
[4]. Dry, C. M., & Sottos, N. R. (1993, July). Passive smart selfrepair
in polymer matrix composite materials. In Smart
Structures and Materials 1993: Smart Materials (Vol. 1916,
pp. 438-445). International Society for Optics and
Photonics.
[5]. Dry, C. (1994). Matrix cracking repair and filling using
active and passive modes for smart timed release of
chemicals from fibers into cement matrices. Smart
Materials and Structures, 3(2), 118-123.
[6]. Ghosh, S. K. (Ed.). (2009). Self-healing Materials:
Fundamentals, Design Strategies, and Applications. John
Wiley & Sons.
[7]. Hughes, T. L., Methven, C. M., Jones, T. G., Pelham, S. E.,
Fletcher, P., & Hall, C. (1995). Determining cement
composition by Fourier transform infrared spectroscopy.
Advanced Cement Based Materials, 2(3), 91-104.
[8]. Qian, S., Zhou, J., De Rooij, M. R., Schlangen, E., Ye, G.,
& Van Breugel, K. (2009). Self-healing behavior of strain
hardening cementitious composites incorporating local
waste materials. Cement and Concrete Composites,
31(9), 613-621.
[9]. Rattanasak, U., & Chindaprasirt, P. (2009). Influence of
NaOH solution on the synthesis of fly ash geopolymer.
Minerals Engineering, 22(12), 1073-1078.
[10]. Rzezniczak, A. K. (2013). Durability of Repair
Techniques of Fine Cracks in Concrete (Doctoral
Dissertation, McMaster University, Canada).
[11]. Sahmaran, M., Keskin, S. B., Ozerkan, G., & Yaman, I.
O. (2008). Self-healing of mechanically-loaded self
consolidating concretes with high volumes of fly ash.
Cement and Concrete Composites, 30(10), 872-879.
[12]. Shi, C., Roy, D., & Krivenko, P. (2006). Alkali-Activated
Cements and Concretes. CRC Press.
[13]. Termkhajornkit, P., Nawa, T., Yamashiro, Y., & Saito, T.
(2009). Self-healing ability of fly ash-cement systems.
Cement and Concrete Composites, 31(3), 195-203.
[14]. Tashima, M. M., Soriano, L., Borrachero, M. V., Monzó, J., & Payá, J. (2013). Effect of curing time on microstructure
and mechanical strength development of alkali activated
binders based on Vitreous Calcium AluminoSilicate (VCAS).
Bulletin of Materials Science, 36(2), 245-249.
[15]. Watanabe, T., Fujiwara, Y., Hashimoto, C., & Ishimaru,
K. (2011). Evaluation of self healing effect in fly-ash
concrete by ultrasonic test method. International Journal
of Modern Physics B, 25(31), 4307-4310.
[16]. Ylmén, R., Jäglid, U., Steenari, B. M., & Panas, I.
(2009). Early hydration and setting of Portland cement
monitored by IR, SEM and Vicat techniques. Cement and
Concrete Research, 39(5), 433-439.
