Implementation of Speed Violation and Insurance Detection System Using RFID and Internet of Things

V. Nagendra*, G. Rakshitha**, K.T. Siddharth Nambiar***, Vyshnavi Lakshmi Burle****, Manu D. K.*****
*-**** Department of Electronics Communication Engineering, KSSEM, Bengaluru, Karnataka, India.
***** Associate Professor, Department of Electronics Communication Engineering, KSSEM, Bengaluru, Karnataka, India.
Periodicity:May - July'2017
DOI : https://doi.org/10.26634/jic.5.3.13680

Abstract

Road accidents are a major problem in today's world. The aim of this research is to provide a solution to prevent such accidents. This project is mainly focused on automatically controlling the speed of the vehicles in speed restricted zones, such as schools, hospitals, and speed limit zones. Currently, the system used for monitoring and controlling speed of vehicles in speed-limited zones is ineffective or non-existent. This work proposes a system for controlling the speed of the vehicles within certain limits in restricted zones without driver intervention, and also checks whether a particular vehicle owner has paid insurance or not. Then it provides an alerts to the owner and the traffic control room in case the payment is not done. In this work, an RF transceiver system is used to indicate the speed limited zones, and upon entering such zones, the speed control system installed in the vehicle automatically adjusts the speed accordingly. The same transceivers also monitor the insurance status of the vehicle, and send relevant messages to the owner of the vehicle.

Keywords

RF Transmitter, RF Receiver, Internet of Things (IoT), Speed Control, Insurance

How to Cite this Article?

Nagendra, V., Rakshitha, G., Nambiar, K.T.S., Burle, V.L., and Manu, D.K. (2017). Implementation of Speed Violation and Insurance Detection System Using RFID and Internet of Things. i-manager’s Journal on Instrumentation and Control Engineering, 5(3), 32-37. https://doi.org/10.26634/jic.5.3.13680

References

[1]. Bhatt, P.P., Chaudhari, K. A., Chaudhary, K. A., Goyal, S. S., & Pandey, A. B. (2014 January). Programming for Automatic over speed Control System for Safety in Automobiles. International Journal on Theoretical and Applied Research in Mechanical Engineering (IJTARME), 3(1), 56-61.
[2]. Bothe, S. S, Jadhav, S. S., Sonawane, P. S., & Bhamare, N.V., (2016). RF based wireless notice board. IOSR Journal of Computer Engineering, 15-17.
[3]. ElShafee, A., & Hamed, K. A. (2012). Design and implementation of a WIFI based home automation system. World Academy of Science, Engineering and Technology, 68, 2177-2180.
[4]. Fan, Y. J., Yin, Y. H., Da Xu, L., Zeng, Y., & Wu, F. (2014). IoT-based smart rehabilitation system. IEEE Transactions on Industrial Informatics, 10(2), 1568-1577.
[5]. https://www.arduino.cc/
[6]. Huang, J., Duan, Q., Zhao, Y., Zheng, Z., & Wang, W. (2017). Multicast Routing for Multimedia Communications in the Internet of Things. IEEE Internet of Things Journal, 4(1), 215-224.
[7]. Kaphungkui, N. K. (2015). RF based Remote Control for Home Electrica appliances. International Journal of Innovative Research In Electrical, Electronics, Instrumentation and Control Engineering, 3(7), 42-44.
[8]. Khan, A., & Mishra, R. (2012). GPS–GSM based tracking system. International Journal of Engineering Trends and Technology, 3(2), 161-164.
[9]. Kodavati, B., Raju, V. K., Rao, S. S., Prabu, A. V., Rao, T. A., & Narayana, D. Y. (2011). GSM and GPS based vehicle location and tracking system. International Journal of Engineering Research and Applications (IJERA), 1(3), 616- 625.
[10]. Laghari, A. A., Memon, M. S., & Pathan, A. S. (2012). RFID based toll deduction system. International Journal of Information Technology and Computer Science (IJITCS), 4(4), 40-46.
[11]. Mishra, Y., Marwah, G. K., & Verma, S. (2015). Arduino based Smart RFID Security and Attendance System with Audio Acknowledgement. International Journal of Engineering Research and Technology, 4(1), 363-367.
[12]. Ngu, A. H., Gutierrez, M., Metsis, V., Nepal, S., &Sheng, Q. Z. (2017). IoT middleware: A survey on issues and enabling technologies. IEEE Internet of Things Journal, 4(1), 1-20.
[13]. Nichat, A. N., Ali, S. K., Solanke, Y. D., & Dodke, A. M. (2015). Wireless Speed and Direction Control of DC Motor by using Radio Frequency Technology. International Journal of Engineering Trends and Technology (IJETT), 20(2), 48-51.
[14]. Majrouhi Sardroud, M. J., & Limbachiya, M. C. (2010). Effective information delivery at construction phase with integrated application of RFID, GPS and GSM technology. In Proceedings of the World Congress on Engineering (Vol. 1).
[15]. Sirisha, K., & Reddy, K. N. (2015). Detection of Vehicle Location and its Emissions using RFID Technology on Internet of Things. International Journal of Eminent Engineering Technologies, 2(5), 96-100.
[16]. Vijaykiran. G, Saikrishna. M,.(2017). IoT based Home Electrical Appliances Control using Node MCU. International Journal of Scientific Engineering and Technology Research, 6(4).
[17]. Wang, C., Daneshmand, M., Dohler, M., Mao, X., Hu, R. Q., & Wang, H. (2013). Guest Editorial-Special issue on internet of things (IoT): Architecture, protocols and services. IEEE Sensors Journal, 13(10), 3505-3510.
If you have access to this article please login to view the article or kindly login to purchase the article

Purchase Instant Access

Single Article

North Americas,UK,
Middle East,Europe
India Rest of world
USD EUR INR USD-ROW
Online 200 35 35 200 15
Pdf 35 35 200 20
Pdf & Online 35 35 400 25

Options for accessing this content:
  • If you would like institutional access to this content, please recommend the title to your librarian.
    Library Recommendation Form
  • If you already have i-manager's user account: Login above and proceed to purchase the article.
  • New Users: Please register, then proceed to purchase the article.