Pre Engineered Buildings - A Review

Salim P.M*, T. Seshadri Sekhar**, Mahima Ganeshan***
* Research Scholar, GITAM School of Technology, Hyderabad, Telengana, India.
** Professor and Dean, NICMAR, Hyderabad, Telengana, India.
*** Research Scholar, Sri Krishna College of Technology, Coimbatore, Tamilnadu, India.
Periodicity:June - August'2017
DOI : https://doi.org/10.26634/jste.6.2.13639

Abstract

Construction activities worldwide are increasing at a tremendous rate and the costs are also increasing in a day-by-day manner. Pre engineered buildings put forwards an excellent solution to all the complicated problems associated with the conventional steel and other type of buildings. At present in a global manner, pre-engineered building or PEB system is becoming an eminent segment in the construction industry. Pre engineered building is less expensive than conventional construction and can be designed according to the specific requirements. The design and construction of pre engineered building is cost effective and less time consuming. The pre engineered buildings can be disassembled and transported to another location for re-erection if necessitates. The maintenance costs of pre engineered building are low compared to the usual method of construction. These buildings have long life expectancies and the impact of steel on environment is far less than using a non-renewable resource and they keep the impact to the environment minimal. As most of the materials used in the construction of pre engineered buildings are recyclable; it conserves the energy and has minimum impact on ecology and environment. So pre engineered building is the only remedy to the construction industry in the creation of an industrial, commercial, recreational or other type of building units within the stipulated time frame with limited usage of material, energy, manpower and without making much harm to the ecology and environment. Thus pre engineered buildings are the prime contributors for the sustainable development of the nation.

Keywords

Pre Engineered Buildings, Unbraced Frames, Primary Members, Secondary Members, Dimensional Accuracy, Sustainable Development.

How to Cite this Article?

Salim, P. M., Sekhar, T. S., & Ganeshan, M. (2017). Pre Engineered Buildings - A Review. i-manager’s Journal on Structural Engineering, 6(2), 39-48. https://doi.org/10.26634/jste.6.2.13639

References

[1]. Aditya, P. M., Gupta, A. K., & Desai, D. B. (2016). Overview of Pre Engineered Buildings. Imperial Journal of Interdisciplinary Research, 2 (6), 1421-1425.
[2]. Ajaz, A. Z., Kulkarni, A. V., & Aslam, H. (2013). Comparative Study of Analysis and Design of Pre- Engineered Buildings and Conventional Frames. IOSR Journal of Mechanical and Civil Engineering, 5 (1), 32-43.
[3]. Alexander, N. (2004). Metal Building Systems-Design nd and Specifications (2 ed.). New York, USA: McGraw-Hill.
[4]. Bureau of Indian Standards. (1991). IS 8500-1991. Specifications for Structural Steel, Micro Alloyed Medium and High Strength Qualities. New Delhi, India.
[5]. Bureau of Indian Standards. (2011). Specifications for Hot Rolled Medium and High Tensile Structural Steel (IS 2062-2011). New Delhi, India.
[6]. Gulati, H. K., Srinivas, R., Mirza, M. R., & Ajay, G. (2013). Pre Engineered Building Systems. Pune, India: Indian Railway Institute of Civil Engineering.
[7]. Jinsha, M. S., & Linda, A. M. (2016). Analysis of Pre- Engineered Building. International Journal of Science and Research, 5(7), 1049-1051.
[8]. Lande, P. S., & Vivek, V. K. (2015). Comparative Study of Pre Engineered Building with Conventional Steel Building. International Journal of Pure and Applied Research in Engineering and Technology, 3(8), 28-39.
[9]. Metal Building Manufacturers Association. (2012). Metal Building Systems Performance Guide Specification. Ohio, USA.
[10]. Princes Thangam, J. S., Gokul Ram, K. V., Marimuthu, K., & Narayanan, S. (2016). Pushover Analysis and Capacity Design of Pre Engineered Building Using Hollow Section for Substation. International Journal for Scientific Research and Development , 4 (3), 1955-1959.
[11]. Salim, P. M., & Seshadri, S. T. (2015a). A Future Perspective of Structural Optimization Methods in Civil Engineering Applications. International Journal of Technology, 5 (2), 251-256.
[12]. Salim, P. M., & Seshadri, S. T. (2015b). Sustainable Cost Optimization of Multi Span Bridges and Fyovers. International Journal of Research in Engineering and Technology, 4 (1), 12-17.
[13]. Subramanian, N. (2008). Pre-Engineered Buildings Selection of Framing System, Roofing & Wall Materials. Master Builder, pp. 48-62.
[14]. Syed, F., Chandra, K. B. S., & Kanakambara, R. S. (2012). Design Concept of Pre Engineered Building. International Journal of Engineering Research and Applications, 2 (2), 267-272.
[15]. Talatahari, S., Aalami, M. T., & Parsiavash, R. (2016). Multi Objective Optimization of Arch Dams using Differential Evolution Methods. International Journal of Optimization in Civil Engineering, 6 (4), 493-504.
[16]. Thakar, J. D., & Patel, P. G. (2013). Comparative Study of Pre Engineered Building Structure by Varying Width of Structure. International Journal of Advanced Engineering Technology, 4 (3), 56-62.
[17]. Ziad, K. A., Aravinthan, T., Yan, Z., & Gonzalez, F. (2012). A Review of Optimization Techniques used in the Design of Fiber Composite Structures for Civil Engineering Applications. Materials & Design, 33 (1), 533-544.
If you have access to this article please login to view the article or kindly login to purchase the article

Purchase Instant Access

Single Article

North Americas,UK,
Middle East,Europe
India Rest of world
USD EUR INR USD-ROW
Online 15 15

Options for accessing this content:
  • If you would like institutional access to this content, please recommend the title to your librarian.
    Library Recommendation Form
  • If you already have i-manager's user account: Login above and proceed to purchase the article.
  • New Users: Please register, then proceed to purchase the article.