i-manager Publications

Miniaturised Dual–Band Bandstop Filter Using HookShaped Stepped Impedance Resonator for WLANApplications

Ankita Srivastava*, Sudhanshu Verma**

* PG Scholar, Department of Electronics and Communication Engineering, Madan Mohan Malaviya University of Technology, Gorakhpur, Uttar Pradesh, India.

** Assistant Professor, Department of Electronics and Communication Engineering, Madan Mohan Malaviya University of Technology, Gorakhpur, Uttar Pradesh, India.

Periodicity:February - April'2017
DOI : https://doi.org/10.26634/jcs.6.2.13470

Abstract

This paper presents a dual-band bandstop filter by using two hook shaped stepped impedance resonator. The filter structure consists of main transmission line and two three-section stepped impedance resonators are connected to this line. Transmission line contains two open stubs to give improved passband return loss and rejection bandwidth. The resonant frequency and bandwidth of the filter can be flexibly controlled by changing the length and position of high-Z and low-Z segments. The design modeling and methodology are also delivered for the efficient design. Two center frequencies at 2.2 GHz and 5.2 GHz is present with rejection level upto 54 dB.The FR4 epoxy material has been used for the design having dielectric permittivity of 4.4 and a thickness of 0.8 mm, which is easily available in market with nominal cost.

Keywords

Bandstop Filter, Dual-band, Stepped Impedance Resonator, Transmission Line

How to Cite this Article?

Srivastava, A., and Verma, S. (2017). Miniaturised Dual–Band Bandstop Filter Using Hook Shaped Stepped Impedance Resonator for WLAN Applications. i-manager’s Journal on Communication Engineering and Systems, 6(2), 20-25. https://doi.org/10.26634/jcs.6.2.13470

References

[1] H. Uchida, H. Kamino, K. Totani, N. Yoneda, M. Miyazaki, Y. Konishi, S. Makino, J. Hirokawa, and M. Ando, (2004). “ Dual-band-rejection filter for distortion reduction in RF transmitters”. IEEE Trans. Microwave Theory Tech., Vol.52, No.11, pp.2550-2556.

[2]. C.H. Tseng, and T. Itoh, (2006). “Dual-band bandpass and bandstop filters using composite right/left-handed metamaterial transmission lines”. IEEE MTT-S Int. Microwave Symp. Dig., pp.931-934.

[3]. R.J. Cameron, M. Yu, and Y. Wang, (2005). “Directcoupled microwave filters with single and dual stopbands”. IEEE Trans. Microw. Theory Tech., Vol.53, No.11, pp.3288- 3297.

[4]. H. Zhang, and K.J. Chen, (2006). “Miniaturized coplanar waveguide bandpass filter using multisection stepped-impedance resonators”. IEEE Trans. Microwave Theory Tech., Vol.54, No.3, pp.1090-1095.

[5]. K.S. Chin, and J.H. Yeh, (2009). “Dual-wideband bandpass filter using short-circuited stepped-impedance resonator”. IEEE Microw. Wireless Compon. Lett., Vol.19, No.3, pp.155-157.

[6]. K.S. Chin, J.H. Yeh, and S.H. Chao, (2007). “Compact dual-band bandstop filters using stepped-impedance resonators”. IEEE Microw. Wireless Compon. Lett., Vol.17, No.12, pp.849-851.

[7]. F.C. Chen, J.M. Qiu, and Q.X. Chu, (2013). “Dual-Band Bandstop Filter using stub-loaded resonator with sharp rejection characteristic”. Electronics Letter, Vol.49, No.5, pp.351-353.

[8]. K.S. Chin, and C.K. Lung, (2009). “Miniaturized microstrip dual-band bandstop filters using tri-section stepped impedance resonators ”. Progress in Electromagnetics Research C, Vol.10, pp.37-48.

[9]. C.M. Tsai, H.M. Lee, and C.C. Tsai, (2005). “Planar filter design with fully controllable second passband”. IEEE Trans. on Micro. Theory and Tech., Vol.53, No.11, pp.3429-3439.

[10]. Z. Ma., K. Kikuchi, Y. Kobayashi, T. Anada, and G. Hagiwara, (2007). “Novel microstrip dual-band bandstop filter with controllable dual-stopband-response”. In Proc. Asia-Pacific Microw. Conf., pp.1177-1180.

rd [11]. D.M. Pozar, (2005). Microwave Engineering, 3 ed. New York: Wiley.

[12]. G.L. Mattaei, L. Young, and E.M.T. Johns, (1980). Microwave Filters, Impedance Matching Network, and Coupling Structures. Artech House, Norwood MA, 1980.

[13]. D. Kumar, and A. De, (2013). “Effective Size Reduction Technique for Microstrip Filters”. Journal of Electromagnetic Analysis and Applications, Vol.5, pp.166-174.

Miniaturised Dual–Band Bandstop Filter Using HookShaped Stepped Impedance Resonator for WLANApplications

Abstract

Keywords

How to Cite this Article?

References

If you have access to this article please login to view the article or kindly login to purchase the article

Purchase Instant Access

Options for accessing this content:

	North Americas,UK, Middle East,Europe		India	Rest of world
	USD	EUR	INR	USD-ROW
Pdf	35	35	200	20
Online	35	35	200	15
Pdf & Online	35	35	400	25