i-manager Publications

Synthesis and Design of Microwave Bandpass Filter using Coupling Matrix

Saurabh Kumar Pandey*, Arvind Kumar Pandey**, R. K. Chauhan***

* PG Scholar, Department of Electronics and Communication Engineering, Madan Mohan Malaviya University of Technology, Gorakhpur, India

** Research Scholar, Department of Electronics and Communication Engineering, Madan Mohan Malaviya University of Technology, Gorakhpur, India.

*** Associate Professor, Department of Electronics and Communication Engineering, Madan Mohan Malaviya University of Technology, Gorakhpur, India.

Periodicity:August - October'2016
DOI : https://doi.org/10.26634/jes.5.3.13464

Abstract

In this paper, synthesis of bandpass filter is performed by using coupling matrix based method. To design a bandpass filter, the standard lowpass to bandpass frequency transformation has been used. Bandpass filter is implemented by using coupled microstrip resonators with both electric and magnetic coupling. The frequency transformation is performed and verified in MATLAB. The layout of filter obtained from coupling matrix is further reduced in size by using some topologies of filter designing. The proposed filter is designed and simulated in ANSYS HFSS software and RT_Duroid is used as dielectric material with substrate thickness of 1.27 mm. The filter response is found in good agreement with the response found from the mathematical model.

Keywords

Coupling Matrix Synthesis, Chebyshev Filtering Function, MATLAB, Frequency Transformation.

How to Cite this Article?

Pandey,S,K., Pandey,A,K., and Chauhan, R.K. (2016). Synthesis and Design of Microwave Bandpass Filter using Coupling Matrix. i-manager's Journal on Embedded Systems, 5(3), 11-16. https://doi.org/10.26634/jes.5.3.13464

References

[1]. A.E. Atia, A.E. Williams, and R. W. Newcomb, (1974). “Narrow-band multiple-coupled Cavity Synthesis”. IEEE Trans. Circuits Syst., Vol.CAS-21, No.9, pp.649–655.

[2]. R.J. Cameron, (1999). “General coupling matrix synthesis methods for Chebyshev filtering functions”. IEEE Trans. Microw. Theory Tech., Vol.47,No.4, pp.433–442.

[3]. R. Cameron, (2003). “Advanced coupling matrix synthesis techniques for microwave filters”. IEEE Trans. Microw. Theory Tech., Vol.51, No.1, pp.1–10.

[4]. P. Kozakowski, A. Lamecki, P. Sypek, and M. Mrozowski, (2005). “Eigenvalue approach to synthesis of prototype filters with source/load coupling”. IEEE Microw. Wireless Compon. Lett., Vol.15, No.2, pp.98–100.

[5]. ChuanGe, Xiao-Wei Zhu, Xin Jiang, and Xiao-Jie Xu, (2015). “ A General Synthesis Approach of Coupling Matrix With Arbitrary Reference Impedances”. IEEE Microw. Wireless Compon Lett., Vol.25, No.6, pp.349-351.

[6]. K. Kurokawa, (1965). “Power waves and the scattering matrix”. IEEE Trans. Microw. Theory Tech., Vol.MTT-13, No.3, pp.194–202.

[7]. J. Hong, and M.J. Lancaster, (1996). “Coupling of microstrip square open-loop resonators for cross-coupled planar microwave filters”. IEEE Trans. Microwave Theory Techniques, Vol.44, No.11, pp.2099-2109.

[8]. S. Amari, (2000). “Synthesis of cross-coupled resonator filters using an analytical gradient-based optimization technique”. IEEE Trans. Microwave Theory Tech., Vol.48, No.9, pp.1559–1564.

Synthesis and Design of Microwave Bandpass Filter using Coupling Matrix

Abstract

Keywords

How to Cite this Article?

References

If you have access to this article please login to view the article or kindly login to purchase the article

Purchase Instant Access

Options for accessing this content:

	North Americas,UK, Middle East,Europe		India	Rest of world
	USD	EUR	INR	USD-ROW
Pdf	35	35	200	20
Online	35	35	200	15
Pdf & Online	35	35	400	25