References
[1]. Arturo Fernandez,Marta Maria Hernando,Juan A.
Martin-Ramos and Juan Corral, (2006). “Multiple Output
AC/DC Converter With an Internal DC UPS,” in
IEEE.Trans.Industrial electronics ,Vol. 53.No.1,pp 296-
304,Feb.
[2]. H. Pinheiro and P. Jain, (1999). “Comparison of UPS
topologies based on high frequency transformers for
powering the emerging hybrid fiber coaxial networks,” in
Proc .IEEE Int.Tele communications Energy
Conf.(INTELEC), Copenhagen, Denmark, Paper 11-2.
[3]. R. Morrison and M. Egan, (1998). “A new single
transformer power factor corrected UPS design,” in Proc. IEEE Applied Power Electronics Conf.(APEC), Anaheim,
CA, pp. 237–243.
[4]. A.Loderson and H.Sansro, (2000). “A rugged converter
for use in low battery voltage uninterruptible power
systems,” in Proc. IEEE Power Electronics Specialists
Conf.(PESC), Galway, Ireland, pp. 1012–1017.
[5]. P. Jain and H. Pinheiro, (1998). “High frequency triport
UP topologies for emerging fiber networks,” in Proc. IEEE
Int. Telecommunications Energy Conf. (INTELEC), San
Francisco, CA, pp. 505–512.
[6]. M. Jain, M. Daniele, and P. Jain, (1998). “High
frequency triport topology for low power UPS,” in Proc. IEEE
Power Electronics Specialists Conf. (PESC),Fukuoka,
Japan, pp. 1796–1802.
[7]. H. Matsuo, K. Kobayashi, Y. Sekine, M. Asano, and L.
Wenzhog, (1998). “Novel solar cell power supply system
using the multiple-input DC–DC converter,” in Proc. IEEE
Int. Telecommunications Energy Conf. (INTELEC),San
Francisco, CA, pp. 797–802.
[8]. H.Matsuo, T. Shigemizu, F. Kurokawa, and
N.Watanabe, (1993). “Characteristics the multiple input
DC–DC converter,” in Proc. IEEE Power Electronics
Specialists Conf. (PESC), Seattle, WA, pp. 115–120.
[9]. K.Ma and Y. Lee, (1996). “An integrated flyback
converter for DC-uninterruptible power supply,” IEEE Trans.
Power Electron., Vol. 11, No. 2, pp. 318–327,Mar.
[10]. E. Rodríguez, D. Abud, and J. Arau, (1999). “A novel
single-stage single-phase DC UPS with power factor
correction,” IEEE Trans. Ind. Electron.,Vol.46, No.6, pp.
1137–1147, Dec.
[11]. ATX12V Power Supply Design Guide, Version 2.01,
Jun. 2002.s
[12]. P. Alou, O. Garcia, J. A. Cobos, J. Uceda, and M.
Rascon, (2002). “Fly back with active clamp: A suitable
topology for low power and very wide input voltage range
applications,” in Proc. IEEE Applied Power Electronics
Conf. (APEC), Anaheim, CA, pp. 242–248.
[13]. J. de la Peña, M. Rivas, A. Huertas, M. Perez, and M.
Rascon, (2002). “Wide input range module for rectified
AC power distribution demonstrator for telecommunications system,” in Proc. IEEE Applied Power
Electronics Conf. (APEC), Anaheim, CA, pp. 1202–1207.
[14]. J.J. Albrech, (1995). “Buck–boost push–pull
converter for very wide input range single stage power
conversion,” in Proc. IEEE Applied Power Electronics Conf. (APEC), Dallas, TX, pp. 303–308.
[15]. D. Maksimovic and S. Cuk, (1991). “Switching
converters with large ranges of DC conversion ratios,” IEEE
Trans. Power Electron., Vol.6, No.1, pp.141-150, Jan.
