References
[1]. B. Singh, A. Chandra, and K. Al-Haddad, (2015). Power
Quality Problems and Mitigation Techniques. Chichester,
West Sussex, United Kingdom: John Wiley & Sons Inc.
[2]. M. Liserre, T. Sauter, and J.Y. Hung, (2010). “Future
Energy Systems: Integrating Renewable Energy Sources
into the Smart Power Grid through Industrial Electronics”.
IEEE Ind. Electron. Magazine, Vol. 4, No. 1, pp. 18-37.
[3]. L. Jun Young, and C. Hyung Jun, (2014). “6.6 kW
Onboard Charger Design using DCM PFC Converter with
Harmonic Modulation Technique and Two-Stage DC/DC
Converter”. IEEE Trans. Ind. Electron., Vol. 61, No. 3, pp.
1243-1252.
[4]. J. Napoles, A.J. Watson, J.J. Padilla, J.I. Leon, L.G.
Franquelo, and P.W. Wheeler, (2013). “Selective Harmonic
Mitigation Technique for Cascaded H-Bridge Converters
with Nonequal DC Link Voltages”. IEEE Trans. on Ind.
Electron., Vol. 60, No. 5, pp. 1963-1971.
[5]. S. Kouro, J.I. Leon, D. Vinnikov, and L.G. Franquelo,
(2015). “Grid Connected Photovoltaic Systems: An
Overview of Recent Research and emerging PV Converter
Technology”. IEEE Ind. Electron. Magazine, Vol. 9, No. 1,
pp. 47-61.
[6]. S. Munir, and L. Yun Wei, (2013). “Residential Distribution
System Harmonic Compensation using PV Interfacing
Inverter”. IEEE Trans. on Smart Grid, Vol. 4, No. 2, pp. 816-
827.
[7]. A.Q. Ansari, B. Singh, and M. Hasan, (2015). “Algorithm
for power angle control to improve power quality in distribution system using unified power quality conditioner”.
IET Generation, Transmission & Distribution, Vol. 9, No. 12,
pp. 1439-1447.
[8]. H. Akagi, (2005). “Active Harmonic Filters”. Proceedings
of the IEEE, Vol. 93, No. 12, pp. 2128-2141.
[9]. A. Javadi, and K. Al-Haddad, (2015). “A Single-Phase
Active Device for Power Quality Improvement of Electrified
Transportation”. IEEE Trans. on Ind. Electron., Vol. 62, No. 5,
pp. 3033-3041.
[10]. T. Yi, L. Poh Chiang, W. Peng, C. Fook Hoong, G. Feng,
and F. Blaabjerg, (2012). “Generalized Design of High
Performance Shunt Active Power Filter with Output LCL
Filter”. IEEE Trans. on Ind. Electron., Vol. 59, No. 3, pp. 1443-
1452.
[11]. H. Akagi, and K. Isozaki, (2012). “A Hybrid Active Filter
for a Three-Phase 12- Pulse Diode Rectifier used as Frontend
of a Medium-Voltage Motor Drive”. IEEE Trans. on Power
Electron., Vol. 27, No. 1, pp. 69-77.
[12]. W.R. Nogueira Santos, E.R. Cabral da Silva, C.
Brandao Jacobina, E. de Moura Fernandes, A. Cunha
Oliveira, and R. Rocha Matias, (2014). “The Transformerless
Single-Phase Universal Active Power Filter for Harmonic and
Reactive Power Compensation”. IEEE Trans. Power
Electron., Vol. 29, No. 7, pp. 3563-3572.
[13]. B.W. Franca, L.F. da Silva, M.A. Aredes, and M.
Aredes, (2015). “An Improved iUPQC Controller to provide
Additional Grid-Voltage Regulation as a STATCOM”. IEEE
Trans. on Ind. Electron., Vol. 62, No. 3, pp. 1345-1352.
[14]. J. Tian, Q. Chen, and B. Xie, (2012). “Series hybrid
active power filter based on controllable harmonic
impedance”. IET Power Electronics, Vol. 5, No. 1, pp. 142-
148.
[15]. O.S. Senturk, and A.M. Hava, (2011). “Performance
Enhancement of the Single-Phase Series Active Filter by
employing the Load Voltage Waveform Reconstruction
and Line Current Sampling Delay Reduction Methods”. IEEE
Trans. Power Electron., Vol. 26, No. 8, pp. 2210-2220.
[16]. A. Varschavsky, J. Dixon, and M. Rotella, (2010).
“Cascaded Nine-Level Inverter for Hybrid-Series Active
Power Filter using Industrial Controller”. IEEE Trans. Ind.
Electron., Vol. 57, No. 8, pp. 2761-2767.
[17]. F.B. Ajaei, S. Afsharnia, A. Kahrobaeian, and S.
Farhangi, (2011). “A Fast and Effective Control Scheme for
the Dynamic Voltage Restorer”. IEEE Trans. on Power
Delivery, Vol. 26, No. 4, pp. 2398-2406.
[18]. T. Jimichi, H. Fujita, and H. Akagi, (2011). “A Dynamic
Voltage Restorer Equipped with a High-Frequency Isolated
DC Converter”. IEEE Trans. on Industry Applications, Vol. 47,
No. 1, pp. 169-175.
[19]. A. Javadi, and K. Al-Haddad, (2014). “A single-phase
transformerless active filter with reduced DC-link voltage”.
rd In 2014 IEEE 23 Inter. Symp. on Ind. Electron (ISIE), Istanbul,
Turkey, pp. 2143-2148.
[20]. H. Akagi, and R. Kondo, (2010). “A Transformerless
Hybrid Active Filter using a Three-Level Pulse width
Modulation (PWM) Converter for a Medium Voltage Motor
Drive”. IEEE Trans. on Power Electron., Vol. 25, No. 6, pp.
1365-1374.
[21]. Y. Lu, G. Xiao, X. Wang, F. Blaabjerg, and D. Lu, (2016).
“Control Strategy for Single-Phase Transformerless Three-
Leg Unified Power Quality Conditioner based on Space
Vector Modulation”. IEEE Trans. on Power Electron., Vol. 31,
No. 4, pp. 2840-2849.
[22]. A. Javadi, A. Hamadi, and K. Al-Haddad, (2014).
“Stability analysis and effects of dampers on Series active
rd compensator”. In 2014 IEEE 23 Inter. Symp. on Ind.
Electron (ISIE), Istanbul, Turkey, pp. 2173-2179.
[23]. O.S. Senturk, and A.M. Hava, (2009). “High-
Performance Harmonic Isolation and Load Voltage Regulation of the Three-Phase Series Active Filter utilizing the
Waveform Reconstruction Method”. IEEE Trans. on Industry
Applications, Vol. 45, No. 6, pp. 2030-2038.
[24]. P. Roncero Sanchez, E. Acha, J. E. Ortega-Calderon,
V. Feliu, and A. Garcia Cerrada, (2009). “A Versatile Control
Scheme for a Dynamic Voltage Restorer for Power-Quality
Improvement”. IEEE Trans. on Power Delivery, Vol. 24, No. 1,
pp. 277-284.
[25]. J. Barros, and J. Silva, (2010). “Multilevel Optimal
Predictive Dynamic Voltage Restorer”. IEEE Trans. Ind.
Electron., Vol. 57, No. 8, pp. 2747-2760.
[26]. R. Gupta, A. Ghosh, and A. Joshi, (2011).
“Performance Comparison of VSC Based Shunt and Series
Compensators used for Load Voltage Control in Distribution
Systems”. IEEE Trans. on Power Delivery, Vol. 26, No. 1, pp.
268-278.
[27]. P. Salmeron, and S.P. Litran, (2010). “Improvement of
the Electric Power Quality using Series Active and Shunt
Passive Filters”. IEEE Trans. on Power Delivery, Vol. 25, No. 2,
pp. 1058-1067.
[28]. Z. Amjadi, and S.S. Williamson, (2011). “Modelling,
Simulation, and Control of an Advanced Luo Converter for
Plug-in Hybrid Electric Vehicle Energy-Storage System”. IEEE
Trans. Vehicular Tech., Vol. 60, No. 1, pp. 64-75.
[29]. S. Rahmani, K. Al-Haddad, and H. Kanaan, (2006). “A
comparative study of shunt hybrid and shunt active power
filters for single-phase applications: Simulation and
experimental validation”. Journal of Math. and Comp. in Simulation (IMACS), Elsevier, vol. 71, pp. 345-359.
