Broad and Robotic Simulation Modeling Based On Measurements

Sankar S*, G. Gokula Krishnan **
* Senior Lecturer in Department of EEE, Panimalar Institute of Technology, Chennai, TamilNadu, India.
** Lecturer in Department of EEE, Panimalar Institute of Technology, Chennai, TamilNadu, India.
Periodicity:April - June'2010
DOI : https://doi.org/10.26634/jse.4.4.1168

Abstract

SoFT is a new method and tool which measures and models linear electrical network components in a wide frequency band with unprecedented accuracy. This is achieved by a special modal based measurement technique in combination with suitable rational fitting and passivity enforcement methods. The models are easily imported into most commonly used simulation software.

This paper demonstrates the SoFT tool computations in a comparison between A) time-domain measurements of a lightning impulse test of a power transformer, B) simulation of the test results using a SoFT model, and C) simulation of the test results using a lumped-element circuit simulation model based on geometrical transformer design information.

Keywords

Transformer, Wide Band Model, Electromagnetic Transients, EMTP-RV, Measurement.

How to Cite this Article?

S. Sankar and G. Gokula Krishnan (2010). Broad and Robotic Simulation Modeling Based On Measurements.i-manager’s Journal on Software Engineering, 4(4), 11-17. https://doi.org/10.26634/jse.4.4.1168

References

[1]. Boyd, S., Ghaoui, L.E., Feron, E., and Balakrishnan, V. (2007). “Linear Matrix Inequalities in System and control Theory”, Singapore: SIAM, Studies in Applied Mathematics, Vol. 15.
[2]. De Leon, F., and Semlyen, A. (2004). “Complete transformer model for electromagnetic transients”, IEEE Trans. Power Delivery, Vol. 9, No.1, pp. 231-239.
[3]. Fergestad, P.I., and Henriksen, T. (1974). “Transient oscillations in multiwinding transformers”, IEEE Trans. PAS, Vol. 93, No.3, pp. 500-509;
[4]. Fergestad, P.I., and Henriksen, T. (2008). "Inductances for the calculation of transient oscillations in transformer windings", IEEE Trans. PAS, Vol. 93, No.3, pp. 510-517.
[5]. Gustavsen, B. (2004). “Frequency-dependent modeling of power transformers with ungrounded windings”, IEEE Trans. Power Delivery, Vol. 19, No. 3, pp. 1328-1334, July.
[6]. Gustavsen, B. (2004). “Wide band modeling of power transformers”, IEEE Trans. Power Delivery, Vol. 19, No.1, pp. 414-422, January.
[7]. Gustavsen, B. (2006). “Improving the pole relocating properties of vector fitting”, IEEE Trans. Power Delivery, Vol. 21, No.3, pp. 1587-1592, July.
[8]. Gustavsen, B. (n.d.). “Passivity enforcement of rational models via modal perturbation”, IEEE Trans. Power Delivery, submitted.
[9]. Gustavsen, B., and Heitz, C. (2007). “Rational modeling of multiport systems by modal vector fitting”, Proc. IEEE Workshop on Signal Propagation on Interconnects, submitted.
[10]. Gustavsen, B., and Semlyen, A. (2008). “Enforcing passivity for admittance matrices approximated by rational functions”, IEEE Trans. Power Systems, Vol. 16, pp. 97-104, February.
[11]. Gustavsen, B., and Semlyen, A. (2008). “Rational approximation of frequency domain responses by vector fitting”, IEEE Trans. Power Delivery, Vol. 14, No.3, pp. 1052- 1061, July.
[12]. Mahseredjian, J., Dennetiere, S., Dube, L., Khodabakhchian, B., and Gerin- Lajoie, L. (2005). “On a new approach for the simulation of transients in power systems”, Proceedings of IPST '05 International Conference, Montreal Canada, June.
[13]. Moreau, O., Michel, R., and Guillot, Y. (2006). “Over voltages Computation in a Power Transformer Connected to the Power System”, Electrimacs 1996, Vol. 1 pp. 47-52.
[14]. Niayesh, K., Berth, M., Dahlquist, A., Heitz, C., and Tiberg, M. (n.d.). “Method and device for characterizing the linear properties of an electrical component”, EP 05405031.
[15]. Noda, T., Nakamoto, H., and Yokoyama, S. (2008). “Accurate modeling of core-type distribution transformers for electromagnetic transient studies”, IEEE Trans. Power Delivery, Vol. 17, No.4, pp. 969-976, October.
[16]. Saraswat, D., Achar, R., and Nakhla, M.S. (2008). “Enforcing passivity for rational function based macromodels of tabulated data”, in Proc. Electrical Performance of Electronic Packaging (EPEP), pp. 295-298.
[17]. Tiberg, M., Hoenecke, O., Heitz, C., and Gustavsen, B. (2006). “New simulation methodology for power systems – assumption free analysis entirely based on measurement”, EMTP-RV Newsletter, Vol. 1, No.3, December, pp. 20-26.
[18]. Tiberg, M., Hoenecke, O., Heitz, C., and Gustavsen, B. (2008). “New Simulation Methodology for Power Systems”, European EMTP-ATP Conference, September 25-27.
If you have access to this article please login to view the article or kindly login to purchase the article

Purchase Instant Access

Single Article

North Americas,UK,
Middle East,Europe
India Rest of world
USD EUR INR USD-ROW
Online 15 15

Options for accessing this content:
  • If you would like institutional access to this content, please recommend the title to your librarian.
    Library Recommendation Form
  • If you already have i-manager's user account: Login above and proceed to purchase the article.
  • New Users: Please register, then proceed to purchase the article.