Design of Controllable Dual-Band Bandpass Filter using Open Loop Triangular Ring Resonators Loaded with Stub Coupled with Transmission Line

Yatindra Gaurav*, R. K. Chauhan**
* Research Scholar, Department of Electronics and Communication Engineering, Madan Mohan Malaviya University of Technology, UP, India.
** Associate Professor, Department of Electronics and Communication Engineering, Madan Mohan Malaviya University of Technology, UP, India.
Periodicity:December - February'2017
DOI : https://doi.org/10.26634/jele.7.2.11408

Abstract

A dual-band bandpass filter based on open loop triangular ring resonator filter is designed in this paper. The filter has the characteristics of compact structure, low insertion loss, and ease of fabrication, since no defected ground structure is used. Based on the current design schemes, the design is planar and has controlled dual-band filter. Several attenuation poles in the stop band are realized to improve the selectivity of the proposed bandpass filter. Stubs are added to the structure to improve the s-parameter performance of the filter. The proposed filter is designed and simulated in Agilent ADS. The experimented results were in good agreement with the simulated results.

Keywords

Open Loop Triangular Ring Resonator, Stubs, Transmission Line

How to Cite this Article?

Gaurav,Y., and Chauhan, R.K. (2017). Design of Controllable Dual-Band Bandpass Filter using Open Loop Triangular Ring Resonators Loaded with Stub Coupled with Transmission Line. i-manager’s Journal on Electronics Engineering, 7(2), 8-13. https://doi.org/10.26634/jele.7.2.11408

References

[1]. R. Levy, (1970). “Zolotarev functions, a new distribution prototype filter, and the design of mixed lumped/ distributed components”. IEEE G-MTT Microwave Int. Symp., Newport Beach, CA, USA, pp.71-75.
[2]. J. Wang, Y.X Guo, B.Z. Wang, L. C. Ong, and S. Xiao, (2006). “High-selectivity dual-band stepped-impedance bandpass filter”. Electronics Letters, Vol.42, No.9, pp.538- 540.
[3]. S. Sun and L. Zhu, (2005). “Novel design of dual-band microstrip bandpass filters with good in-between isolation”. IEEE APMC 2005, Suozhou, pp.4-7.
[4]. L.C. Tsai and C.W. Hsue, (2004). “Dual-band bandpass filters using equal length coupled-serialshunted lines and Z-transform techniques”. IEEE Trans. Microw. Theory Tech., Vol.52, No.4, pp.1111-1117.
[5]. W.H. Tu and K. Chang, (2005). “Miniaturized dualmode bandpass filter with harmonic control”. IEEE Microwave and Wireless Components Letters, Vol.15, No.12, pp.838-840.
[6]. C. Lugo and J. Papapolymerou, (2005). “Bandpass filter design using a microstrip triangular loop resonator with dual-mode operation”. IEEE Microwave and Wireless Components Letters, Vol.15, No.7, pp.475-477.
[7]. J.X. Chen and T. Y. Yum, (2006). “Dual-mode dualband bandpass filter using stacked-loop structure”. IEEE Microwave and Wireless Components Letters, Vol.16, No.9, pp.502-504.
[8]. J.S. Hong and S. Z. Li, (2003). “Dual-mode microstip triangular patch resonators and filters”. IEEE MTT-S Digest, pp.1901-1904.
[9]. J.S. Hong and M. J. Lancaster, (2001). Microstrip Filters for RF/Microwave Applications. John Wiley & Sons, Inc.
[10]. J.S. Hong, (1996). “Couplings of microstrip square open-loop resonators for cross-coupled planar microwave filters”. IEEE Transaction Microwave Theory and Techniques, Vol.44, No.11, pp.2099-2109.
[11]. X.W. Dai, C.H. Liang, B. Wu, and J. Fan, (2008). “Novel dual-band bandpass filter design using microstrip open-loop resonators”. Journal of Electromagnetic Waves and Applications, Vol.22, No.2, pp.219-225.
[12]. J.K. Xiao, S.P. Li, and Y. Li, (2006). “Novel planar bandpass filters using one single patch resonators with corner cuts”. Journal of Electromagnetic Waves and Applications, Vol.20, No.11, pp.1481-1493.
[13]. J.K. Xiao and Y. Li, (2006). “Novel compact microstrip square ring bandpass filters”. Journal of Electromagnetic Waves and Applications, Vol.20, No.13, pp.1817-1826.
[14]. M. Kazerooni and A. Cheldavi, (2006). “Simulation, analysis, design, and applications of Array Defected Microstrip Structure (ADMS) filters using Rigorously Coupled Multi-Strip (RCMS) method”. Progress in Electromagnetics Research, PIER, Vol.63, pp.193-207.
[15]. M. Khalaj-Amirhosseini, (2006). “Microwave filters using waveguides filled by multi-layer dielectric”. Progress in Electromagnetics Research, PIER, Vol.66, pp.105-110.
If you have access to this article please login to view the article or kindly login to purchase the article

Purchase Instant Access

Single Article

North Americas,UK,
Middle East,Europe
India Rest of world
USD EUR INR USD-ROW
Pdf 35 35 200 20
Online 35 35 200 15
Pdf & Online 35 35 400 25

Options for accessing this content:
  • If you would like institutional access to this content, please recommend the title to your librarian.
    Library Recommendation Form
  • If you already have i-manager's user account: Login above and proceed to purchase the article.
  • New Users: Please register, then proceed to purchase the article.