i-manager Publications

Design of Dual-Band Bandpass Filter Using Interdigital Embedded Open Loop Triangular Resonator Loaded with Stubs

Yatindra Gaurav*, R. K. Chauhan**

* Research Scholar, Department of Electronics and Communication Engineering, Madan Mohan Malaviya University of Technology, Gorakhpur, Uttar Pradesh, India.

** Associate Professor, Department of Electronics and Communication Engineering, Madan Mohan Malaviya University of Technology, Gorakhpur, Uttar Pradesh, India.

Periodicity:May - July'2016
DOI : https://doi.org/10.26634/jes.5.2.11387

Abstract

This paper presents a design of dual-band bandpass filter with good stopband performance and high selectivity at the edges of passband by using interdigital embedded open loop triangular resonator structure loaded with stubs. The structure is less complex and easy to fabricate since no via or defected ground structure is used. Coupled stubs are loaded to the resonating structure to improve the stopband performance of proposed filter. Interdigital structure is embedded to the resonating structure loaded with stubs to improve second passband and stopband performance of proposed filter by realizing inter-stage coupling of interdigital capacitor in the resonator. A dual band BPF is designed for various applications in microwave communication systems at 5.6 and 13.7 GHz. The pass bands can be conveniently tuned to desired frequencies by controlling the corresponding resonator dimensions. The design topology and performance of the proposed filter is validated by electromagnetic simulator Agilent ADS. The measured results agree well with the simulated results.

Keywords

Band Pass Filter (BPF), Stub-Loaded Resonator, Open Loop Triangular Resonator, Interdigital Structure, Selectivity, Stopband

How to Cite this Article?

Gaurav,Y., and Chauhan.R.K. (2016). Design of Dual-Band Bandpass Filter Using Interdigital Embedded Open Loop Triangular Resonator Loaded with Stubs. i-manager's Journal on Embedded Systems, 5(2), 30-35. https://doi.org/10.26634/jes.5.2.11387

References

[1]. C. Lugo, and J. Papapolymerou, (2005). “Bandpass Filter Design using a Microstrip Triangular Resonator with Dual-Mode Operation”. IEEE Trans Microwave and Wireless Components Lett., Vol.15, No.7, pp.475-477.

[2]. J.S. Hong, and S. Li, (2003). “Dual-Mode Microstrip Triangular Patch Resonators and filters”. IEEE MTT-S Dig., Philadelphia, PA, USA, Vol.3, pp.l901-1904.

[3]. Yaqeen S. Mezaal, and Halil Tanyer Eyyuboglu, (2012). “A new narrow band dual mode microstrip slotted patch bandpass filter design based on fractal geometry”. 7^th International Conference on Computing and Convergence Technology (ICCCT), Seoul, pp.1180-1184.

[4]. H. Iwasaki, (1996). “A Circularly Polarized Small-Size Microstrip Antenna with a Cross Slot”. IEEE Trans Antennas and Propagation., Vo1.44, No.10, pp.1399-1401.

[5]. J. Xiao, S. Li, and Y. Li, (2006). “Novel Planar Bandpass Filters using Single Patch Resonators with Corner Cuts”. Journal of Electromagnetic Waves and Applications, Vol.20, No.11, pp.1481-1493.

[6]. X. Wang, W. Ji, and Y. Li, (2003). “Microstrip Bandpass Filter using One Single Patch Resonator with Two Transmission Zeros”. Electron. Lett., Vol.39, No.17, pp.1255-1256.

[7]. J.S. Hong, and M.J. Lancaster, (1995). “Bandpass Characteristics of New Dual-Mode Microstrip Square Loop Resonators”. Electronics Letters, Vol.31, No.11, pp.891- 892.

[8]. J. Chen, and Q. Xue, (2005). “Novel Microstrip Bandpass Filter using One Equilateral Triangular-Patch Resonator”. Microwave Opt. Technol. Lett., Vol.44, No.3, pp.222-223.

[9]. K. Chang, and L. Hsieh, (2004). Microwave Ring Circuits and Related Structures, 2^nd edition. John Wiley and Sons Ltd.

[10]. J.S. Hong, and M.J. Lancaster, (2001). Microstrip Filters for RF/Microwave Application. New York: Wiley.

[11]. E.S. Ahmed, (2012). “Dual-Mode Dual-Band Microstrip Bandpass Filter based on Fourth Iteration TSquare Fractal and Shorting Pin”. Radio Engineering Journal, Vol.1, No.2, pp.617-623.

[12]. Yatindra Gaurav, and R.K. Chauhan, (2017). “Design of Triple Band Bandpass Filter using Two Coupled Open Loop Triangular Ring Resonators Loaded with Stub”. International Journal of Advances in Microwave Technology, Vol.2, No.1, pp.85-88.

[13]. Yatindra Gaurav, and R.K. Chauhan, (2017). “Design of BPF using Pseudo-Interdigital Structure for Impedance Bandwidth enhancement of Monopole Antenna for UWB Application”. International Journal of Electronics Engineering Research, Vol.9, No.1, pp.37-55.

[14]. Yatindra Gaurav, and R.K. Chauhan, (2017). “Design of Closed Loop Dual Band Bandpass Filter using Two Different Size Cascaded Open Loop Triangular Ring Resonator”. International Journal of Computational Intelligence Research, Vol.13, No.2, pp.313-319.

[15]. Yatindra Gaurav, and R.K. Chauhan, (2017). “Design of controllable dual-band bandpass filter using open loop triangular ring resonators loaded with stub coupled with transmission line”. Journal on Electronics Engineering, Vol.7, No.2, pp.8-13.

If you have access to this article please login to view the article or kindly login to purchase the article

Single Article

	North Americas,UK, Middle East,Europe		India	Rest of world
	USD	EUR	INR	USD-ROW
Online	15	15

ADD TO CART

Options for accessing this content:

If you would like institutional access to this content, please recommend the title to your librarian.
If you already have i-manager's user account: Login above and proceed to purchase the article.
New Users: Please register, then proceed to purchase the article.