References
[1]. Peter Newton, “Making Bricks with Red Mud in
Jamaica,” IDRC, Resources, Books: Reports, Vol.21, No. 2.
[2]. Chaddha M.J., S. Rai and R.N. Goyal,
“Characteristics of Red Mud of Indian Alumina Plants and their possible Utilisation”, ENVICON 2007, pp.41-44.
[3]. Wanchao Liu, Jiakuan Yang and Bo XiaRef,
“Application of Bayer Red Mud for Iron Recovery and
Building Material Production from Alumosilicate
Residues,” Available online 8 April 2008.
[4]. Singh Maneesh, S.N. Upadhayay, P. M. Prasad,
“Preparation of special cements from red mud,” Waste
Management,Vol. 16,No. 8,pp. 1996, 665- 670.
[5]. “Method for Producing Bricks from Red Mud,”
Document Type and Number: United States Patent
3886244.
[6]. H.H. Nakamura et al., "Use of Bauxite Wastes for
Lightweight Building Products," Ceramic Bulletin, March,
1971, pp. 248-250.
[7]. Paramguru K., P.C. Rath, V.N. Misra, “Trends in Red Mud
Utilisation,” Mineral Processing and Extractive Metallurgy
Review: 26: pp.1-29, 2005.
[8]. Nimje M. T., R. J. Sharma, G. S. Sengar, “Conversion of
Aluminium Industrial wastes (Fly- ash, red mud) into glassceramic
products,” ENVICON 2007, pp.41-44, 132-135.
[9]. Satpathy Alok et al., “Red mud: A Potential Coating
Material,” ENVICON 2007, pp.139-141.
[10]. Fofana Mohamad, et al., “Treatment of Red Mud
from Alumina Production by High Intensity Magnetic
Separation,” Magnetic and Electrical Separation. 1995.
Vol. 6, pp. 243-251.
[11]. Erça Erol and Reat Apak, “Furnace smelting and
extractive metallurgy of red mud: Recovery of TiO , Al O 2 2 3
and pig iron”, Journal of Chemical Technology &
Biotechnology, 26 Mar 1997. Vol.70 No.3, pp. 241 - 246.
[12]. Mishra, B., A. Staley, D. Kirkpatrick, “Recovery of
Value-added Products from Red Mud,” Minerals &
Metallurgical Processing. 2002. Vol. 19, No. 2, pp. 87-94.
[13]. Courtney R., Timpson J.P., Grennan E., “Growth of
Trifolium pratense in Red Mud Amended With Process
Vol. No. pp.
Sand, Gypsum and Thermally Dried Sewage Sludge,”
International Journal of Surface Mining, Reclamation
and Environment, Vol. 17, No.4, December 2003 , pp.
227-233(7).
[14]. Varnanas S.P., D. Boufounas, & D. Fafoutis, Proceedings of the 9 International Conference on
Environmental Science and Technology, Rhodes island,
Greece, 1-3 Sept. 2005.
[15]. M. Paradis, J. Duchesne, A. Lamontagne, and D.
Isabel, “Using Red Mud Bauxite for the Neutralization of
Acid Mine Tailings: a Column Leaching test“, Canadian
Geotechnical Journal Vol. 43, No.11, pp.1167–1179
(2006).
[16]. S. Vlahos, K.J. Summers, D.T. Bell and R.J. Gilkes,
“Reducing Phosphorus Leaching from Sandy Soils with Red
Mud Bauxite Processing Residues,” Australian Journal of
Soil Research Vol.27, No.4, pp. 651-662.
[17]. Yee Soong, et al., CO Sequestration Via 2
Brine/bauxite Residue Mixture, National Energy
Technology Laboratory, U.S. Department of Energy,
Pittsburgh, PA 15236-0940,
[18]. Summers R. N., Rivers M.R. and Clarke, M. F. , ”The use
of Bauxite Residue to Control Diffuse Phosphorous Pollution
in Western Australia- A win –win win outcome”,
th Proceedings of the 6 International Alumna Quality
Workshop 2002.
[19]. Chunmei Shi, Jianhang Xu, Eric Beckman, Robert
Enick, ”Carbon Dioxide Sequestration via ph Reduction of
Red Mud using Liquid Co ”, University of Pittsburgh, 2
pp.703-707
[20]. Claudia Brunori, Carlo Cremisini, Paolo Massanisso,
Valentina Pinto, Leonardo Torricelli, “Reuse of a Treated
Red Mud : Studies on Environmental Compatibility,”
Journal of Hazardous Materials B117, pp.55–63 (2005).
[21]. D.J. Cooling, ”Improving the sustainability of Residue
Management Practices- Alcoa World Alumina Australia”,
Perth, Australia, pp.3-16, Paste (2007).
[22]. G. Mussels, G. Sparkling, J. Summers,
“Bioremediation of Bauxite Residue in Western Australia
–An Initial Feasibility Study,” Alcoa of Australia Report No.
26, ISSN 1320-4807, August (1993).
[23]. Hanahan Colleen, McConchie David, M. Pohl John,
Creelman Robert, Clark, Malcolm, Stocksiek Curt,
”Chemistry of Seawater Neutralization of Bauxite Refinery
Residues (Red Mud)”, Environmental Engineering
Science, ISSN 1092-8758, 124-138, (2004).
[24]. Jones Graham B, Joshi Gargi, Clark Malcolm,
McConchie David M, ”Carbon capture and the
aluminium industry: preliminary studies”, Southern Cross
University , (2006).
[25]. Laszlo Kotai, Istvan E. Sajo, Istvan Gacs, Katalin
Papp, Andras Bar tha, Gyorgy Banvolgyi “An
Environmentally Friendly Method for Removing Sodium in
Red Mud,” Chemistry letters, 35 (11), (2006).
[26]. Sameer Khaitan, David A. Dzombak and Gregory V.
Lowry, “Mechanisms of Neutralization of Bauxite Residue
by Carbon Dioxide,” Journal of Environmental
Engineering, (2009).
[27]. Report prepared by RRL, Bhubaneswar, Treatment of
red mud for its complete utilization as soil conditioner/
fertilizer, (1995).
[28]. Sara J. Palmer, Ray L. Frost, “Characterisation of
Bauxite and Seawater Neutralized Bauxite Residue using XRD and Vibrational Spectroscopic Techniques,” Journal
of Material Science , Vol. 4, No.1/Jan (2009).
[29]. Virotec, Australia scientists, June 2003, “Dealing with
Red Mud- By-product of the Bayer Process for Refining
Aluminium,” Materials World, Vol. 11, No. 6, pp.22-24,
June (2003).
[30]. Samir Khaitan, David A. Dzombak, Gregory V. Lowry,
“Neutralisation of Bauxite Residue with Flyash,”
Environmental Engineering Science, Vol. 26 No.2,
pp.431-440 February 1, (2009).
[31]. Suchita Rai, K. L. Wasewar, M. J. Chaddha,
Biswanath Sen, Jyoti Mukhopadhyay, “Neutralisation of
Bauxite Residue for its Safe Disposal,” ETWMT-09, Indo-
Italian Conference on Emerging Trends in Waste
Management technologies, pp.473-475, Dec3-4,
(2009).
