References
[1]. Heywood J.B., “Internal Combustion Engine
Fundamentals”, McGraw Hill Book Co., New York, 1988.
[2]. Benson R.S., White House N.D., “Internal Combustion
Engine”, Pergamon Press Ltd, Oxford, 1979.
[3]. Ganesan V., “Computer Simulation of Compression-
Ignition Engine Processes”, Universities Press, India, 2000.
[4]. Edwards S.P., Frankle G.R., Wirbeleit F., Raab A., “The
Potential of a Combined Miller Cycle and Internal EGR for
Future Heavy Duty Truck Applications”, SAE paper 980180,
1998.
[5]. Benajes J., Serrano J.R., Molina S., Novella R.,
“Potential of Atkinson cycle combined with EGR for
pollutant control in a HD diesel engine”, Energy
Conversion and Management 50 (2009) 174-183.
[6]. Tamilporai P., Baluswamy N., Mannar Jawahar P.,
Subramaniyam S., “Simulation and Analysis of
Combustion and Heat Transfer in Low-Heat-Rejection
Diesel Engine Using Two-Zone Combustion Model and
Different Heat Transfer Models”, SAE paper 2003-01-1067,
2003.
[7]. Jaichandar S. and Tamilporai P., “Low Heat Rejection
Engines An Overview”, SAE paper 2003-01-0405, 2003.
[8]. Dorsaf Saad, Philipe Saad and Lloyd Kamo, “Thermal
Barrier Coatings for High Output Turbocharged Diesel
Engine”, SAE paper 2007-01-1442, 2007.
[9]. Roy Kamo, Nagesh S. Mavinahally and Lloyd kamo,
“Emissions Comparisons of an Insulated Turbocharged
Multi-Cylinder Miller Cycle Diesel Engine”, SAE paper
980888, 1998.
[10]. Nagesh Mavinahally and Roy Kamo, “Insulated
Miller Cycle Diesel Engine”, SAE paper 961050, 1996.
[11]. Kentfield J.A.C., “Diesel Engines with Extended
Expansion Strokes”, SAE paper 891866, 1989.
[12]. Kentfield J.A.C., “Extended, and Variable, Stroke
Reciprocating Internal Combustion Engines,” SAE paper
2002-01-1941, 2002.
[13]. Miyairi Y., “Computer Simulation of an LHR DI Diesel
Engine”, SAE paper 880187, 1988.
[14]. Thomas Morel, Syed Wahiduzzaman and Edward F.
Fort, “Heat Transfer Experiments in an Insulated Diesel”,
SAE paper 880186, 1988.
[15]. Abd-Alla G.H., “Using exhaust gas recirculation in
internal combustion engines: a review ”, Energy
Conversion and Management 43 (2002) 1027-1042.
[16]. Loganathan S., Tamilporai P., “Simulation of
Performance of Direct Injection Diesel Engine Fuelled with
Oxygenate Blended Diesel”, SAE paper 2007-01-0070,
2007.
[17]. Yanlin Ge, Lingen Chen, Fengrui Sun, Chih Wu,
“Performance of an Atkinson cycle with heat transfer,
friction and variable specific-heats of the working fluid”,
Applied Energy 83 (2006) 1210-1221.
[18]. Ekrem Buyukkaya, Tahsin Engin, Muhammet Cerit,
“Effects of thermal barrier coating on gas emissions and
performance of a LHR engine with different injection
timings and valve adjustments”, Energy Conversion and
Management 47 (2006) 1298-1310.
[19]. Adnan Parlak, Halit Yasar, Bahri Sahin, “Performance
and exhaust emission characteristics of a lower
compression ratio LHR Diesel engine”, Energy Conversion and Management 44 (2003) 163-175.
[20]. Adnan Parlak, “The effect of heat transfer on
performance of the Diesel cycle and exergy of the
exhaust gas stream in a LHR Diesel engine at the optimum
injection timing”, Energy Conversion and Management
46 (2005) 167-179.
[21]. Adnan Parlak, Halit Yasar, Can Hasimoglu, Ahmet
Kolip, “The effects of injection timing on NOx emissions of
a low heat rejection indirect diesel injection engine”,
Applied Thermal Engineering 25 (2005) 3042-3052.
[22]. Takemi Chikahisa, Mitsuru Konno, Tadashi
Murayama, Takuya Kumagai, “Analysis of NO formation
characteristics and its control concepts in diesel engines
from NO reaction kinetics”, JSAE Review 15 (1994) 297-303.
[23]. Marcus Klein and Lars Eriksson, “A Specific Heat Ratio
Model for Single-Zone Heat Release Models”, SAE paper
2004-01-1464, 2004.
[24]. Avinash Kumar Agrawal, Shrawan Kumar Singh,
Shailendra Sinha and Mritunjay Kumar Shukla, “Effect of
EGR on the exhaust gas temperature and exhaust opacity
in compression ignition engines”, Sadhana, Vol.29 (2004)
275-284.
[25]. Sanghoon Kook and Choongsik Bae, Paul C.Miles,
Dae Choi and Lyle M.Pickett, “The influence of Charge
dilution and Injection Timing on Low-Temperature Diesel
Combustion and Emissions”, SAE paper 2005-01-3837,
2005.
[26]. Hakan Yilmaz and Anna Stefanopoulou, “Control of
Charge Dilution in Turbocharged Diesel Engines via
Exhaust Valve Timing”, ASME, Journal of Dynamic Systems,
Measurement, and Control, Vol.127 (2005) 363-372.
