References
[1]. Akins, R.G. and Lin, Y.S., (1986). “Transient Behaviour of
Natural Convection inside a Vertical Cylinder”. Chemical
Engineering Communication, Vol. 43, pp. 69-83.
[2]. Bazylak, A., Djilali, N. and D. Sinton, (2006). “Natural
convection in an enclosure with distributed heat sources”.
Numerical Heat Transfer, Part A, Vol. 49, pp. 655–667.
[3]. Fontana E., Silva A., and Mariani, V.C., (2011).
“Natural convection in a partially open square cavity with
internal heat source: An analysis of the opening mass
flow”. International Journal of Heat and Mass Transfer, Vol.
54, pp. 1369–1386.
[4]. Horanyi, S., Krebs, L., and Muller, U., (1999). “Turbulent
Rayleig Benard convection in low Prandtl-number fluids”.
International Journal of Heat and Mass Transfer, Vol. 42,
pp. 3983-4003.
[5]. Lin, W. and Armfield, S.W., (1999). “Direct simulation of
natural convection cooling in a vertical circular cylinder”.
International Journal of Heat and Mass Transfer, Vol. 42,
pp. 4117–4130.
[6]. Lin, W. and Armfield, S.W., (2001). “Natural convection
cooling of rectangular and cylindrical containers”.
International Journal of Heat and Fluid Flow, Vol. 22, pp.
72–81.
[7]. Lin, W. and Armfield, S. W., (2004). “Scaling analysis
and direct simulation of unsteady natural convection
th cooling of fluid with Pr < 1 in a vertical cylinder”. 15
Australasian Fluid Mechanics Conference, Sydney,
Australia, pp. 1-4.
[8]. Martyushev, S.G. and Sheremet, M.A., (2014).
“Conjugate natural convection combined with surface
thermal radiation in an air filled cavity with internal heat
source”. International Journal of Thermal Sciences, Vol.
76, pp. 51-67.
[9]. Sharif, M.A.R. and Mohammad, T.R., (2005). “Natural
convection in cavities with constant flux heating at the
bottom wall and isothermal cooling from the sidewalls”.
International Journal of Thermal Sciences, Vol. 44, pp.
865–878.
[10]. Sheriff N., and Davies N.W., (1979). “Liquid metal
natural convection from plane surfaces, a review
including recent sodium measurements”. Int. J. Heat Fluid
Flow, Vol. 1(4), pp. 149-154.
[11]. Silva, A.K., Lorente, S. and Bejan, A., (2004).
“Optimal distribution of discrete heat sources on a wall
with natural convection”. International Journal of Heat
and Mass Transfer, Vol. 47, pp. 203–214.
[12]. Sudha, A.J. and Velusamy, K., (2013). “Numerical
analysis of natural convection in sodium plenum below
the grid plate of a fast reactor during a severe accident”.
Annals of Nuclear Energy, Vol. 54, pp. 120–128.
[13]. Viskanta, R., Kim, D.M. and Gau, C., (1986). “Three
dimensional natural convection heat transfer of a liquid
metal in a cavity”. Int. J. Heat Mass Transfer, Vol. 29, pp.
475-485.
[14]. Voronov, S.A., Kiryushin, A.I. and Kuzavkov, N.G.,
(1994). “Evaluation of down motion time interval of molten materials to core catcher during CDA postulated
in LMFR”. Proceedings of IWGFR-89, pp. 545-551.
[15]. Wu, W. and Ching, C.Y., (2010). “Laminar natural convection in an air-filled square cavity with partitions on
the top wall”. International Journal of Heat and Mass
Transfer, Vol. 53, pp. 1759–1772.
