References
[1]. P. Sankar, K. Sundareswaran, and P. Sankaran, (2014).
“MPPT of PV systems under partial shaded conditions
through a colony of flashing fireflies”. IEEE Trans. Energy
Conversion, Vol. 29. No. 2, pp. 463-472.
[2]. H. Patel and V. Agarwal, (2008). “Maximum power
point tracking scheme for PV systems operating under
partially shaded conditions”. IEEE Trans. Ind. Electron., Vol.
55, No. 4, pp. 1689-1698.
[3]. Ministry of New and Renewable Energy (MNRE).
Retrieved from www.mnre.gov.in
[4]. Subudhi and R. Pradhan, (2013). “A comparative
study on maximum power point tracking techniques for
photovoltaic power systems”. IEEE Trans. Sustainable
Energy, Vol. 4, No. 1, pp. 89-98.
[5]. Antonio Luque and Stain Hegedus, (2003). Photovoltaic Science & Engineering. A. John Wiley & Sons
Ltd Publications, England.
[6]. Truptishree Dutta, (2014). “Global MPPT technique in a
solar PV array under partially shaded conditions”. M.Tech
Thesis, NIT Rourkela.
[7]. N. Fernia, G. Petrone, G. Spagnuolo, and M. Vitelli,
(2005). “Optimization of perturb and observe maximum
power point tracking method”. IEEE Trans. Power Electron,
Vol. 20, No. 4, pp. 963–973.
[8] T. Noguchi, S. Togashi, and R. Nakamoto, (2002).
“Short-current pulse-based maximum-power-point
tracking method for multiple photovoltaic and converter
module system”. IEEE Trans. Ind. Electron., Vol. 49, No. 1,
pp. 217–223.
[9]. B. N. Alajmi, K. H. Ahmed, S. J. Finney, and B. W.
Williams, (2011). “Fuzzy logic-control approach of a
modified hill-climbing method for maximum power point
in microgrid standalone photovoltaic system”. IEEE Trans.
Power Electron., Vol. 26, No. 4, pp. 1022–1030.
[10]. Debashis Das, and Shishir Kumar Pradhan, (2011).
“Modeling and simulation of PV array with boost
converter”. B.Tech Thesis, NIT Rourkela.
[11]. GN. Tiwari and Swapnil Dubey, (2010). Fundamentals
of Photovoltaic Modules and their Applications. RSC
Publications, Cambridge.
[12]. E. V. Paraskevadaki and S. A. Papathanassiou,
(2011). “Evaluation of MPP voltage and power of mc-Si PV modules in partial shading conditions”. IEEE Trans. Energy
Convers., Vol. 26, No. 3, pp. 923–932.
[13] . X.-S. Yang (2009). “Firefly algorithms for multimodal
optimization”. In Proc. Stochastic Algorithms Foundations
Appl. , Vol. 5792, pp. 169–178.
[14]. www.learnabout-electronics.org
[15]. Muhammad H. Rashid, (2004). Power Electronics
Circuits, Devices & Applications. Pearson Education, Inc.,
rd 3 edition.
[16]. Satyobroto Talukder, (2011). “Mathematical
Modeling and Applications of Particle Swarm
Optimization”. MS Thesis, School of Engineering - Blekinge
Institute of Technology (Sweden).
[17]. Y.-H. Liu, S.-C. Huang, J.-W. Huang and W.-C. Liang,
(2012). “A particle swarm optimization-based maximum
power point tracking algorithm for PV systems operating
under partially shaded conditions”. IEEE Trans. Energy
Convers., Vol. 27, No. 4, pp. 1027–1035.
[18] K. Ishaque and Z. Salam, (2013). “A deterministic
particle swarm optimization maximum power point
tracker for photovoltaic system under partial shading
condition”. IEEE Trans. Ind. Electron., Vol. 60, No. 8, pp.
3195–3206.
[19]. Merwan Saad Saouq, Hadj Ahmad Abbassi, and
Salem Kermiche, (2013). “Improved incremental
conductance method for MPPT using Cuk converter”.
WSEAS Trans. Power Systems, Vol. 8, No. 3, pp. 124-133.
