References
[1]. Talone P. and Russo G., (2007). “RFID, Fondamenti diuna tecnologia silenziosamente pervasiva”. Fondazione
Ugo Bordoni, Rome, Italy, pp. 1-445.
[2]. H. Aubert H., (2011). “RFID Technology for Human
Implant Devices, Comptes rendus à l'Académie des
Sciences”. Special issue on Nanosciences/nanotechn
ologies, pp. 1-18.
[3]. Jensen K., Weldon J., Garcia H. and Zettl A., (2007).
“Nanotube radio”. Nano Letters, Vol. 7, No.11, pp. 3508-
3511.
[4]. Sauer C., Stanacevic M., Cauwenberghs G., and
Thakor N. (2005). “Power harvesting and telemetry in
CMOS for implanted devices”. IEEE Transactions on
Circuits and Systems, Vol. 52, No.12, pp 2605-2613.
[5]. Freudenthal E., Herrera D., Kautz F., Natividad C.,
Ogrey A., Sipla J., Sosa A., Betancourt C., and Estevez L.,
(2007). “Evaluation Of HF RFID for Implanted Medical
Applications”. Departmental Technical Reports (CS),
Paper 162.
[6]. McCreery D. et al., (2006). “Microelectrode array for
chronic deep-brain microstimulation and recording”. IEEE
Transactions on Biomedical Engineering, Vol. 53, No. 4,
pp. 726-737.
[7]. Chen M. et al., (2011). “Body Area Networks: A Survey”.
ACM/Springer Mobile Networks and Applications
(MONET).
[8]. Hamad-Schifferli K. et al., (2002). “Remote electronic
control of DNA hybridization through inductive coupling to
an attached metal nanocrystal antenna”. Nature, Vol.
415(6868), pp. 152-155.
[9]. Usami M., (2004). “An ultra small RFID chip: µ-chip”.
Proceedings of Radio Frequency Integrated Circuits
(RFIC) Symposium, pp. 241-244.
[10]. Coil-on-chip RFID tag, Maxell, Fairlawn, NJ, 2010.
[11]. Li Y., Chang C., Lin G. and Lu C., (2013). “Radio
Frequency Identification (RFID) Inserted Fixed Prosthesis
and its Applications in Clinical Dentistry”. International
Journal of Automation and Smart Technology, Vol. 3.
[12]. Brandl M. et al., (2009). “A Low-Cost Wireless Sensor
System and Its Application in Dental Retainers”. IEEE
Sensors Journal, Vol. 9, No. 3.
[13]. Guan S. et al., (2011). “A Wireless Powered
Implantable Bio-Sensor Tag System-on-Chip for
Continuous Glucose Monitoring”. Proceedings of IEEE –
Biomedical Circuits and Systems Conference (BioCAS).
[14]. Liu X., Lee Berger J., Ogirala A. and, Mickle M. H.,
(2013). “A Touch Probe Method of Operating an
Implantable RFID tag for Orthopedic Implant
Identification”. IEEE Transactions on Biomedical Circuits
and Systems, Vol. 7, No. 3, pp. 236-242.
[15]. Ricciardi L. et al., (2003). “Investigation into the
Future of RFID in Biomedical Applications”. Proceedings of
SPIE, Bioengineered and Bioinspired Systems, Vol. 5119.
[16]. Sandeep Reddy M. et al., (2008). “Sensor integration
in an RFID tag for monitoring biomedical signals”.
th Proceedings of 12 IEEE VLSI Design and Test Symposium,
Bangalore, India.
[17]. Zhukov I., Mikhaylov D., and Starikovskiy A., (2012).
“Nano sensors integrated into dental implants for
detection of acute myocardial infarction”. International
Journal of Emerging Trends & Technology in Computer
Science (IJETTCS), Vol. 1, No. 2.
[18]. Reicher J., Reicher D., and Reicher M., (2007). “Use
of Radio Frequency Identification (RFID) Tags in Bedside
Monitoring of Endotracheal Tube Position”. Journal of
Clinical Monitoring and Computing, Vol. 21, No. 3 , pp.
155-158.
