References
[1]. Asmael, N. M., Ahmed, A. I., and Kareem, Q. S.,
(2010). “Effect of Additives Types and Contents on the
Properties of Stone Matrix Asphalt Mixtures”, Engineering
and Technology Journal, Vol. 28, No. 21,pp.6414-6426.
[2]. Arun Gaur and Sunil Bose (2013). “Performance of
Warm Mix Asphalt for Indian Conditions”, Journal of Indian
highways, Vol. 41, No. 9, pp. 29-39.
[3]. Barthel, W., J.P. Marchand and M. Von Devivere
(2004). “Warm asphalt mixes by adding a synthetic zeolite”,
Eurovia, Retrived from www.asphamin.com. Accessed
November .
[4]. Chen, H., Xu, Q., Chen, S., and Zhang, Z., (2009).
“Evaluation and Design of Fibers-Reinforced Asphalt
Mixtures”, Journal of Materials and Design, Vol. 30, pp.
2595-260
[5]. Dinis-Almeida M.A, Castro-Gomes J.A and Antunes M.
L (2012). “Mechanical Performance and Economic
th Evaluation of Warm Mix Recycling Asphalt", 5 International
Congress - Sustainability of Road Infrastructures, pp. 286 –
296.
[6]. Gui-juan Zhao and Ping Guo (2012). “Workability of
Sasobit Warm Mixture Asphalt”, International Conference
on Future Energy, Environment, and Materials, Peer-review
under responsibility of International Materials Science
Society, pp. 1230-1236.
[7]. G.C. Hurley., Prowell, B.D., (2005). “Starting to Warm”, Roads and Bridges, Vol. 42, No. 9.
[8]. Rouzbeh Ghabchia, Dharamveer Singhb, Musharraf
Zamanc and Qingyan Tian (2013). “Application of asphaltaggregates
interfacial energies to evaluate moistureinduced
damage of warm mix asphalt”, Procedia - Social
and Behavioral Sciences, Vol.104, pp. 29 – 38.
[9]. Rosolino V, Teresa I, and Vincenzo G (2013). “Warm Mix
Asphalt With Synthetic Zeolite: A Laboratory Study on Mixes
Workability ”, Journal of Pavement Research And
Technology, Vol. 6, No. 5, pp. 562-569.
[10]. Shaopeng, W. U., Qunshan, Y. E., and Ning, L.
I.,(2008). “Investigation of Rheological and Fatigue
Properties of Asphalt Mixtures Containing Polyester Fibers”,
Journal of Construction and Building Materials, Vol. 22, No.
10, pp. 2111-2115.
[11]. ASTM D 1559. Test Method for Resistance of Plastic
Flow of Bituminous Mixtures Using Marshall Apparatus.
[12]. ASTM D 6926-04. Standard Practice for Preparation of
Bituminous Specimens Using Marshall Apparatus.
[13]. BS EN 12697-22 (2003). Standard Test methods for hot
mix asphalt Bituminous mixtures - Wheel tracking.
[14]. BS EN 12697 33 (2007). Standard Test methods for hot
mix asphalt Bituminous mixtures - Specimen prepared by
roller compactor.
[15]. Ministry of Road Transport and Highways (2013).
MoRTH-5th revision.
[16]. IS: 1203-1978, Methods for testing tar and bituminous
materials: determination of penetration.
[17]. IS: 1205-1978, Methods for testing tar and bituminous
materials: determination softening point.
[18]. IS: 1206-1978, Methods for testing tar and bituminous
materials: determination of viscosity.31. 32.
[19]. IS: 2386 (Part 1)-1963, Methods of test for Aggregates
for concrete: Particle size and shape.
[20]. IS: 2386(Part 3)-1963, Methods of test for Aggregates
for concrete: specific gravity, density, voids, absorption and
bulking.
[21]. IS: 2386(Part 4)-1963, Methods of test for Aggregates
for concrete: Impact value and Abrasion value.
