References
[1]. Du, J.H., Bai, J., Cheng, H.M., (2007). “The Present status
and key problems of carbon nanotube based polymer
composites”, Express polymer letters, Vol.1 (5), pp.253-273.
[2]. Ijima,S., (1991). “Helical microtubules of graphitic
carbon”, Nature, Vol.354, pp.56-58.
[3]. Wong, E.W., Sheehan, P.E., Lieber, C.M., (1997). “Nano
beam Mechanics:Elasticity,Strength, and Toughness of
Nanorods and Nanotubes ”, Science, Vol.277,
pp.1971–1975.
[4]. Yu,M., Lourie, O., Dyer, M.J., Kelly, T.F., Ruoff, R.S., (2000).
“Strength and Breaking Mechanism of Multiwalled Carbon
nanotubes Under Tensile Load”, Science, Vol. 287, pp.
637–40.
[5]. Shaffer, M., Sandler, J., (2006). “Processing and Properties of Nanocomposites” In G. Suresh & Advani (Ed.),
Singapore: World Scientific Publishing Co Pte Ltd. (pp. 22).
[6]. Jia, Z., Wang, Z., Xu, C., Zhu, S., (1999). “Study on
poly(methyl methacr ylate): carbon nanotube
composites”, Material Science and Engineering A, Vol.
271, pp.395-400.
[7]. Tibbetts, G.G., McHugh, J.J., (1999). “Mechanical
properties of vapor-grown carbon fiber composites with
thermoplastic matrices”, J Materials Research, Vol.14,
pp.2871-2880.
[8]. Andrews, R., Jacques, D., Minot, M., Rantell. T.,(2002).
“Fabrication of Carbon Multiwall Nanotube/ Polymer
Composites by Shear Mixing”, Macromolecular Materials
and Engineering, Vol.87, pp.395–403.
[9]. Olaf, M., Dirk, K., Holger, W., et al., (2004). “Mechanical
properties and electrical conductivity of carbonnanotubes
filled polyamide-6 and blends with acrylonitrile/
butadiene /styrene”, Polymer, Vol. 45, pp.739-748.
[10]. Qian, D., Dickey, E.C., Andrews, R., Rantell, T., (2000).
“Load transfer and deformation mechanisms in carbon
nanotube-polystyrene composites”, Applied Physics
Letters, Vol.76, pp.2868–2870.
[11]. Safadi, B., Andrews, R., Grulke, E.A., (2002).
“Multiwalled carbon nanotube polymer composites:
Synthesis and characterization of thin films”, J Appl Polym
Sci, Vol.84 (14), pp.2660–69.
[12]. Fu, S.Y., Lauke, B., (1997). “Analysis of Mechanical
properties of injection molded Short Glass Fibre (SGF)
/Calcite ABS Composites”, J. Materials Science
Technology, Vol.13, pp.389-96.
[13]. Fu. S.Y., Lauke, B., (1998). “Fracture resistance of
unfilled and calcite particle filled ABS composites
reinforced by short glass fibers (SGF) under impact load”,
Composites Part A, Vol. 29A, pp.631-41.
[14]. Cadek, M., Coleman, J.N., Barron, V., Hedicke, K.,
Blau, W.J., (2002). “Morphological and mechanical
properties of carbon-nanotube-reinforced semicrystalline
and amorphous polymer composites”, Applied Physics
Letters, Vol.81, pp.5123-25.
[15]. Dekkers, M.E.J., Heikens, D., (1983). “The effect of
interfacial adhesion on the tensile behavior of polystyrene glass bead composites”, J.of Applied Polymer Science,
Vol.28, pp.3809-15.
[16]. Ma, P.C., Siddiqui, N.A., Marom, G., Kim, J.K., (2010).
“Dispersion and functionalization of carbon nanotubes for
polymer-based nanocompo-sites: A review”, Composites:
Part A, Vol. 41(10), pp.1345-52.
[17]. Hill, D.E., Lin, Y., Rao, A.M., Allard, L.F., Sun, Y.P., (2002).
“Functionalization of Carbon Nanotubes with Polystyrene”,
Macromolecules, Vol. 35, pp. 9466-71.
[18]. Autur, Kaw., (2006). “Mechanics of Composite
Materials”, In Boca Raton (2nd Edn), United States of
America, USA: Taylor & Francis Group, CRC press.
[19]. Coleman, J.N., Cadek, M., Blake, R., Nicolosi, V.,
Ryan, K.P., Belton, C., et al., (2004). “High Performance
Nanotube-Reinforced Plastics: Understanding the
Mechanism of Strength Increase“ Advanced Functional
Materials, Vol. 14(8), pp.791–98.
[20]. Shao, Y.F., Xi Qiao, F., Bernd, L., Yiu, W.M., (2008).
“Effects of particle size, particle/matrix interface adhesion
and particle loading on mechanical properties of particulate-polymer composites”, Composites Part B, Vol.
39, pp.933-961.
[21]. Jonathan, N.C., Umar, K., Werner, J.B., Yurii, K.G.,
(2006). “Small but strong: A review of the mechanical
properties of carbon nanotube-polymer composites”,
Carbon, Vol.44, pp.1624-1652.
[22]. Park, S.H., Bandaru, P.R., (2010). “Improved
mechanical properties of carbon nanotube/polymer
composites through the use of carboxyl-epoxide
functional group linkages”, Polymer, Vol.51, pp.5071-77.
[23]. Liao, K., Li, S., (2001). “Interfacial characteristics of a
carbon nanotube - polystyrene composite system”, Appl
Phys Letters, Vol. 79 (25), pp.4225–27.
[24]. Wong, M., Paramsothy, M., Xu, X.J., Ren, Y., Li, S., Liao,
K., (2003). “Physical interactions at carbon nanotubepolymer
interface”, Polymer, Vol.44 (25), pp.7757–64.
[25]. Thostenson, E.T., Chunyu, Li., Tsu Wei Chou., (2005).
“Nanocomposites in context”, Composites Science and
Technology, Vol.65, pp.491-516.
