Laboratory Investigation of Warm Mix Asphalt with the Inclusion of Recycled Aggregate

K. Naresh*, A. Ramesh**, M. Kumar***
* PG Student, Department of Civil Engineering, VNR Vignana Jyothi Institute of Engineering and Technology, Telangana, India.
** Associate Professor, Department of Civil Engineering, VNR Vignana Jyothi Institute of Engineering and Technology, Telangana, India.
*** Professor & Head, Department of Civil Engineering, University College of Engineering, Osmania University, Telangana, India.
Periodicity:December - February'2015
DOI : https://doi.org/10.26634/jce.5.1.3136

Abstract

Pavement construction evolves with the use of large quantities of natural aggregates (NA). The bulk use of natural aggregates in pavement layers is a disturbing situation and is resulting in demolishing of natural resources. In flexible pavements, hot mix asphalt is used for construction of surface and binder course layers. The hot mix asphalt when prepared at mixing temperature, releases harmful gases and pollutes the environment. Several techniques have been developed to reduce the mixing and compaction temperatures of hot mix asphalt. One of the technologies is named as Warm Mix Asphalt (WMA). WMA mixes contribute cost savings in operation of bitumen plants through reduction of energy costs. Warm mixes also allow articulated vehicle of asphalt loads for longer distances, without any delay and significant loss in temperature. In this context, an attempt is made in the laboratory for appreciating the influence of recycle aggregates (RA) on characteristics of warm mix asphalt. Performance characteristics were evaluated through Satiability and Indirect Tensile Strength (IDT). Recycled aggregate was added proportionately at 10%, 15% and 20% of virgin warm mix asphalt. It was observed that stability values are higher for WMA of recycled aggregate as compared with traditional asphalt mix. 15%RA has exhibited improved characteristics than when compared with the other two percentages of recycled aggregates.

Keywords

Recycled Aggregate, Sasobit, Marshall, In-direct Tensile Strength Test.

How to Cite this Article?

Naresh.K., Ramesh.A., and Kumar.M. (2015). Laboratory Investigation of Warm Mix Asphalt with the Inclusion of Recycled Aggregate. i-manager’s Journal on Civil Engineering, 5(1), 1-8. https://doi.org/10.26634/jce.5.1.3136

References

[1]. Almeida dnil M.A, Castro-Gomes J.A, Antunes M. L (2013). “Mechanical Performance And Economic Evaluation Of Warm Mix Recycling Asphalt,” International Congress - Sustainability of Road Infrastructures, Vol.53, pp. 286 – 296.
[2]. Arun Gaur and Sunil Bose (2013). “Performance of Warm Mix Asphalt for Indian Conditions”, Journal of Indian highways, Vol.41 (9), pp. 29-39.
[3]. ASTM D 5581 – 07 (2013). Standard Test Method For Conduct of Resistance to Plastic Flow of Bituminous Mixtures Using Marshall Apparatus.
[4]. ASTM D 4123 – 82 (1995). Standard Test Method For Conduct of Indirect Tensile Strength Test.
[5]. Hebhoub, H., Aoun, H., Belachia, M., Houari, H., and Ghorbel, E. (2011). “Use of waste marble aggregates in concrete.” Construction Building Materials, Vol:25(3), pp.1167– 1171.
[6]. MORTH (2013). “Specifications for Road and Bridge Works”, 5th Revision, Ministry of Road Transport and Highways, New Delhi.
[7]. Reyes-Ortiz O, Berardinelli E, Alvarez, A. E, Carvajal- Muñoz, J. S., Fuentes, L. G.(2012). “Evaluation Of Hot Mix Asphalt Mixtures With Replacement Of Aggregates By Reclaimed Asphalt Pavement (RAP) Material”, 5th International Congress - Sustainability of Road Infrastructures, Vol. 53, pp. 379 – 388.
[8]. Rosolino V, Teresa I, And Vincenzo G (2013). ” Warm Mix Asphalt With Synthetic Zeolite: A Laboratory Study On Mixes Workability”, Journal of Pavement Research And Technology, Vol.6, No.5, pp: 562-569.
[9]. Rouzbeh G, Dharamveer S, Musharraf Z, Qingyan T (2013). “Application of Asphalt-Aggregates Interfacial Energies To Evaluate Moisture-Induced Damage of Warm Mix Asphalt” Procedia - Social And Behavioural Sciences, Vol.104, pp. 29-38.
[10]. Shu Wei Goh, Mohd Rosli Mohd Hasan, Zhanping Y (2013). “Performances Evaluation Of Cecabase RT In Warm Mix Asphalt Technology” Procedia of Transportation Association, Vol.96, pp. 2782 – 2790.
[11]. Texas Highway Department (1966). “Manual of Testing Procedures”, Materials and Test Division, Test Method Tex-206-F, Vol I Revised Edition.
[12]. Yi Wang, Jingwen Zhu, Liping Liu, Lijun Sun (2013). “Gradation Evaluation Of Asphalt Rubber Mixture With Warm-Mix Additive”, Procedia of Transportation Association, Vol.96, pp.31-38.
[13]. Zhaoxing Xie, Wenzhong Fan, Lili Wang, And Junan Shen (2013). ” The Effectiviness Of Warm Mix Asphalt (WMA) Additives Affected By The Type Of Aggregate And Binder” International Journal of Pavement Research And Technology, Vol 6,No.5, pp.554-561.
If you have access to this article please login to view the article or kindly login to purchase the article

Purchase Instant Access

Single Article

North Americas,UK,
Middle East,Europe
India Rest of world
USD EUR INR USD-ROW
Pdf 35 35 200 20
Online 35 35 200 15
Pdf & Online 35 35 400 25

Options for accessing this content:
  • If you would like institutional access to this content, please recommend the title to your librarian.
    Library Recommendation Form
  • If you already have i-manager's user account: Login above and proceed to purchase the article.
  • New Users: Please register, then proceed to purchase the article.