i-manager Publications

Experimental Investigation of Control Factors of WEDM for Al-6063

Deepak Matta*, Jonny Garg**, Neeraj Sharma***

* Assistant Professor, Department of Mechanical Engineering, G.I.M.T, Kurukshetra, India.

** Assistant Professor, Department of Mechanical Engineering, B.G.I.E.T, Sangrur, India.

*** Assistant Professor, Department of Mechanical Engineering, R.P.I.I.T, Karnal, India.

Periodicity:February - April'2013
DOI : https://doi.org/10.26634/jme.3.2.2213

Abstract

Wire Electric Discharge Machining (WEDM) is a specialized machining process capable of accurately machining parts with varying hardness, complex shapes, which have sharp edges that are difficult to machine using mainstream machining processes. This process is used to make intricate shapes with the help of a wire. Aluminum alloy 6063 is used as a work piece and performance analysis is done to find out the significant control factors for aluminum alloy 6063 by using one factor approach at a time. In this paper effect of various parameters like pulse on time, pulse off time, servo voltage, peak current, water pressure, wire tension, wire feed on cutting rate has been investigated while machining on aluminum alloy 6063 using one variable at a time approach. Experiments show the response for different parameters on WEDM.

Keywords

Al 6063, WEDM, Pulse on Time, Pulse Off Time, Peak Current, Wire Tension, Water Pressure, Servo Voltage.

How to Cite this Article?

Matta, D., Garg, J., & Sharma, N. (2013). Experimental Investigation of Control Factors of WEDM for Al-6063. i-manager's Journal on Mechanical Engineering, 3(2), 33-38. https://doi.org/10.26634/jme.3.2.2213

References

[1]. Benedict, G.F. (1987). Electrical discharge machining (EDM), non-traditional manufacturing process, Marcel Dekker, Inc, New York & Basel, 231-232.

[2]. Jain V.K. (2004). Advanced Machining Processes, Allied Publishers, Mumbai, 21-28.

[3]. O.Dodun.A.A.goncalves-Coelho and L.Slatineanu. G.Nagit., (2009). Using wire electrical discharge machining for improved corner cutting accuracy of thin parts. Int J adv Manuf technol, 41, 858-864.

[4]. Lok Y.K. and Lee T.C., (1997). Processing of advanced ceramics using the wire-cut EDM process. Journal of materials processing, 63, 839-843.

[5]. Prohaszka J., Mamalis A.G. and Vaxevandis N.M., (1996). The effect of electrode material on machinability in wire electro-discharge machining. Journal of materials processing technology, 69,233-237

[6]. Jangra Kamal., (2012). Study of unmachined area in intricate machining after rough cut in WEDM. International Journal of Industrial Engineering Computation, 3,887-892.

[7]. Nicolae Balc, Monica Balas, Alexandru Popan, Alina Luca.,(2010). Methods of improving the efficiency of the edm-wire cutting. Fascicle of management and technological engineering, 9, 469-472.

[8]. Sharma Neeraj, Khanna Rajesh, Gupta R D and Sharma Renu.,(2012). Modeling and multiresponse optimization on WEDM for HSLA by RSM. Int J Adv Manuf Technol, DOI 10.1007/s00170-012-4648-4.

[9]. Saha P., Saha P. and Pal S.K., (2011). Parametric optimization in WEDM of WC-CO composite by neuro-genetic technique. Proceedings of the World Congress on Engineering, III, WCE 2011, London, U.K.

[10]. Jangra Kamal, Jain.Ajay and Grover Sandeep., (2010). Optimization of multiple-machining characteristics in wire electrical discharge machining of punching die using grey relational analysis. Journal of Scientific & Industrial Research, 69, 606-612.

[11]. Parashar Vishal, Rehman A., Bhagoria J.L. and Puri, Y.M., (2010). Kerfs width analysis for wire cut electro discharge machining of SS304L using design of experiments. Indian Journal of Science and Technology, 3,369-373.

[12]. Gupta Pardeep, Khanna Rajesh, Gupta Rahul dev and Sharma Neeraj.,(2012). Effect of process parameters on kerf width in WEDM for HSLA using Response surface methodology. Journal of Engineering and Technology, 2, 1-6.

[13]. Hari S, Rajesh K (2011). Parametric optimization of Cryogenic treated D-3 for cutting rate in wire electrical discharge machining. J Eng Technol 1(2):59–64

	North Americas,UK, Middle East,Europe		India	Rest of world
	USD	EUR	INR	USD-ROW
Pdf	35	35	200	20
Online	35	35	200	15
Pdf & Online	35	35	400	25

Experimental Investigation of Control Factors of WEDM for Al-6063

Abstract

Keywords

How to Cite this Article?

References

If you have access to this article please login to view the article or kindly login to purchase the article

Purchase Instant Access

Options for accessing this content: