References
[1]. S. Meninger, J. O. Mur-Miranda, R. Amirtharajah, A. P. Chandrakasan, and J. H. Lang, (2001). “Vibration-to-electric energy conversion,” IEEE Trans. Very Large Scale Integr. Syst., Vol. 9, No. 1, pp. 64–76, Feb.
[2]. Suman Dwari and Leila Parsa, (2010). ”An Efficient AC/DC Step Up Converter for Low Voltage Energy Harvesting”,IEEE Trans On Power Electronics Vol .25, No.8, Aug.
[3]. J.C. Salmon, (1993). “Circuit topologies for single-phase voltage-doubler boost rectifiers,” IEEE Trans. Power Electron., Vol. 8, No. 4, pp. 521–529, Oct.
[4]. S. Dwari, R. Dayal, and L. Parsa, (2008). “A novel direct AC/DC converter for efficient low voltage energy harvesting,” in Proc. IEEE Ind. Electron. Soc. Annu. Conf., Nov., pp. 484–488.
[5]. M. Ferrari, V. Ferrari, D. Marioli, and A. Taroni, (2006). “Modeling, fabrication and performance measurements of a piezoelectric energy converter for power harvesting in autonomous microsystems,” IEEE Trans. Instrum. Meas., Vol. 55, No. 6, pp. 2096–2101, Dec.
[6]. G.K. Ottman, H. F. Hofmann, and G. A. Lesieutre, (2003). “Optimized piezoelectric energy harvesting circuit using step-down converter in discontinuous conduction mode,” IEEE Trans. Power Electron., Vol. 18, No. 2, pp. 696– 703, Mar.
[7]. E. Lefeuvre, D. Audigier, C. Richard, and D. Guyomar, (2007). “Buck-boost converter for sensorless power optimization of piezoelectric energy harvester,” IEEE Trans. Power Electron., Vol. 22, No. 5, pp. 2018–2025, Sep.
[8]. B.H. Stark, P. D. Mitcheson, M. Peng, T.C. Green, E. Yeatman, and A. S. Holmes, (2006). “Converter circuit design, semiconductor device selection and analysis of parasitics for micropower electrostatic generators,” IEEE Trans. Power Electron., Vol. 21, No. 1, pp. 27–37, Jan.
[9]. J. Elmes, V. Gaydarzhiev, A.Mensah, K. Rustom, J. Shen, and I. Batarseh, (2007). “Maximum energy harvesting control for oscillating energy harvesting systems,” in Proc. IEEE Power Electron. Spec. Conf., Jun., pp. 2792–2798.
[10]. P.D.Mitcheson, T. C. Green, E.M.Yeatman, and A. S. Holmes, (2004). “Architectures for vibration-driven micropower generators,” J. Microelectromech. Syst., Vol. 13, No. 3, pp. 429–440, Jun. 2004.
[11]. B.H. Stark, P.D. Mitcheson, M. Peng, T. C. Green, E. Yeatman, and A. S. Holmes, (2006). “Converter circuit design, semiconductor device selection and analysis of parasitics for micropower electrostatic generators,” IEEE Trans. Power Electron., Vol. 21, No. 1, pp. 27–37, Jan. 2006.
[12]. N.G. Stephen, (2006). “On energy harvesting from ambient vibration,” J. Sound Vibrations, Vol. 293, pp. 409–425, 2006.
[13]. M. El-Hami, P. Glynne-Jones, N. M. White, M. Hill, S. Beeby, E. James, A. D. Brown, and J. N. Ross, (2001). “Design and fabrication of a new vibrationbased electromechanical power generator,” Sens. Actuators A: Phys., vol. 92, pp. 335–342, 2001.
[14]. A. Richelli, L. Colalongo, S. Tonoli, and Z.M. Kov´acs-Vajna, (2009). “A 0.2?1.2 VDC/DC boost converter for power harvesting applications,” IEEE Trans. Power Electron., Vol. 24, No. 6, pp. 1541–1546, Jun. 2009.
[15]. P.D. Mitcheson, T.C. Green, E.M. Yeatman, and A.S. Holmes, (2007). “Power processing circuits for electromagnetic, electrostatic and piezoelectric inertial energy scavengers,” Microsyst. Technol., Vol. 13, pp. 1629–1635, May 2007.
