i-manager Publications

Corrosion: Types, Theories and Preventive Measure

Bhumika Tuli*

Chandigarh Group of Colleges, Landran, Mohali, Punjab, India.

Periodicity:January - March'2023
DOI : https://doi.org/10.26634/jms.10.4.19303

Abstract

The breakdown of materials, typically metals, is due to a chemical environmental response that causes a functional breakdown of the components. A reverse extractive metallurgy process called corrosion relies on temperature, stress, erosion, and environmental concentration. It produces significant economic losses that range between 1% and 5% of Gross National Product (GNP) annually for any nation. In addition, rust not only raises the costs of components, but is also accountable for fatalities and safety risks. Thus, the purpose of this review is to provide a general overview of the various types of corrosion and related preventative strategies. Consequently, corrective action can be taken to reduce the impact of corrosion-related issues.

Keywords

Corrosion, Classification, Factors, Types, Theories, Corrosion in Metal, Protection from Corrosion.

How to Cite this Article?

Tuli, B. (2023). Corrosion: Types, Theories and Preventive Measure. i-manager’s Journal on Material Science, 10(4), 21-42. https://doi.org/10.26634/jms.10.4.19303

References

[1]. Adamberg, K., Kask, S., Laht, T. M., & Paalme, T. (2003). The effect of temperature and pH on the growth of lactic acid bacteria: A pH-auxostat study. International Journal of Food Microbiology, 85(1-2), 171-183.

[2]. Adriaens, A., & Dowsett, M. (2010). The coordinated use of synchrotron spectroelectrochemistry for corrosion studies on heritage metals. Accounts of Chemical Research, 43(6), 927-935.

[3]. Ashish, B., Neeti, K., & Himanshu, K. (2013). Copper toxicity: A comprehensive study. Research Journal of Recent Sciences, 2, 58-67.

[4]. Bayramoğlu, G., Alemdaroğlu, T., Kedici, S., & Aksüt, A. A. (2000). The effect of pH on the corrosion of dental metal alloys. Journal of Oral Rehabilitation, 27(7), 563-575.

[5]. Bedi, T. S., Kumar, S., & Kumar, R. (2019). Corrosion performance of hydroxyapaite and hydroxyapaite/titania bond coating for biomedical applications. Materials Research Express, 7(1), 015402.

[6]. Belgaumkar, A. (2020). It's a Tough Balance: The Lived Experiences of Resilience in ER Physicians (Doctoral dissertation, University of Saskatchewan).

[7]. Bhusnure, O. G., Dongare, R. B., Gholve, S. B., & Giram, P. S. (2018). Chemical hazards and safety management in pharmaceutical industry. Journal of Pharmacy Research, 12(3), 357-369.

[8]. Birks, N., Meier, G. H., & Pettit, F. S. (2006). Introduction to the High Temperature Oxidation of Metals. Cambridge University Press.

[9]. Bolar, A., Tesfamariam, S., & Sadiq, R. (2014). Management of civil infrastructure systems: QFD-based approach. Journal of Infrastructure Systems, 20(1), 04013009.

[10]. Bonnin-Pascual, F., & Ortiz, A. (2014). Corrosion Detection for Automated Visual Inspection. Intechopen.

[11]. Buchheit, R. G. (2005). Corrosion resistant coatings and paints. In Handbook of Environmental Degradation of Materials. William Andrew Publishing, (pp. 367-385).

[12]. Calmano, W., Hong, J., & Förstner, U. (1993). Binding and mobilization of heavy metals in contaminated sediments affected by pH and redox potential. Water Science and Technology, 28(8-9), 223-235.

[13]. Casalongue, H. S., Kaya, S., Viswanathan, V., Miller, D. J., Friebel, D., Hansen, H. A., ... & Ogasawara, H. (2013). Direct observation of the oxygenated species during oxygen reduction on a platinum fuel cell cathode. Nature Communications, 4(1), 2817.

[14]. Cook, D. C. (2005). Spectroscopic identification of protective and non-protective corrosion coatings on steel structures in marine environments. Corrosion Science, 47(10), 2550-2570.

[15]. Dalamagkidis, K., Valavanis, K. P., & Piegl, L. A. (2008). On unmanned aircraft systems issues, challenges and operational restrictions preventing integration into the National Airspace System. Progress in Aerospace Sciences, 44(7-8), 503-519.

[16]. Daniels, V. (1981). Plasma reduction of silver tarnish on daguerreotypes. Studies in Conservation, 26(2), 45-49.

[17]. Davis, J. R. (Ed.). (2000). Corrosion: Understanding the Basics. ASM International.

[18]. Dawson, P. H. (1968). Rolling contact fatigue crack initiation in a 0.3 per cent carbon steel. Proceedings of the Institution of Mechanical Engineers, 183(1), 75-86.

[19]. De Koning, T. (1949). Vaporization cooling of large electrical machines. Journal of the Franklin Institute, 248(1), 49-68.

[20]. Dearnley, P. A., Dahm, K. L., & Çimenoǧlu, H. (2004). The corrosion–wear behaviour of thermally oxidised CP-Ti and Ti–6Al–4V. Wear, 256(5), 469-479.

[21]. Deflorian, F., Fedel, M., Rossi, S., & Kamarchik, P. (2011). Evaluation of mechanically treated cerium (IV) oxides as corrosion inhibitors for galvanized steel. Electrochimica Acta, 56(23), 7833-7844.

[22]. Diamanti, K., & Soutis, C. (2010). Structural health monitoring techniques for aircraft composite structures. Progress in Aerospace Sciences, 46(8), 342-352.

[23]. Dohmann, J. F., Horsthemke, F., Küpers, V., Bloch, S., Preibisch, Y., Kolesnikov, A., ... & Bieker, P. (2021). Galvanic couples in ionic liquid based electrolyte systems for lithium metal batteries-an overlooked cause of galvanic corrosion? Advanced Energy Materials, 11(24), 2101021.

[24]. Faraday, M. (1857). X. The Bakerian Lecture. Experimental relations of gold (and other metals) to light. Philosophical Transactions of the Royal Society of London, (147), 145-181.

[25]. Fayomi, O. S. I., Akande, I. G., & Odigie, S. (2019, December). Economic impact of corrosion in oil sectors and prevention: An overview. In Journal of Physics: Conference Series, 1378(2), 022037. IOP Publishing.

[26]. Ferracane, J. L., Hilton, T. J., Stansbury, J. W., Watts, D. C., Silikas, N., Ilie, N., ... & Hickel, R. (2017). Academy of Dental Materials guidance—Resin composites: Part II—Technique sensitivity (handling, polymerization, dimensional changes). Dental Materials, 33(11), 1171-1191.

[27]. Foissner, W. (1991). Basic light and scanning electron microscopic methods for taxonomic studies of ciliated protozoa. European Journal of Protistology, 27(4), 313- 330.

[28]. Fowler, G., Pashby, I. R., & Shipway, P. H. (2009). The effect of particle hardness and shape when abrasive water jet milling titanium alloy Ti6Al4V. Wear, 266(7-8), 613-620.

[29]. Fucito, L. (2013). Methods and Materials Used for Patination at the Fonderia Chiurazzi.

[30]. Fuller, T. F., & Harb, J. N. (2018). Electrochemical Engineering. John Wiley & Sons.

[31]. Gaalen, K., Gremse, F., Benn, F., McHugh, P. E., Kopp, A., & Vaughan, T. J. (2022). Automated ex-situ detection of pitting corrosion and its effect on the mechanical integrity of rare earth magnesium alloy-WE43. Bioactive Materials, 8, 545-558.

[32]. Graumann, S. J., Sensat, M. L., & Stoltenberg, J. L. (2013). Air polishing: A review of current literature. American Dental Hygienists' Association, 87(4), 173-180.

[33]. Guerrero-Martínez, A., Barbosa, S., PastorizaSantos, I., & Liz-Marzán, L. M. (2011). Nanostars shine bright for you: colloidal synthesis, properties and applications of branched metallic nanoparticles. Current Opinion in Colloid & Interface Science, 16(2), 118-127.

[34]. Gulikers, J. (2005). Theoretical considerations on the supposed linear relationship between concrete resistivity and corrosion rate of steel reinforcement. Materials and Corrosion, 56(6), 393-403.

[35]. Guo, S., Si, R., Dai, Q., You, Z., Ma, Y., & Wang, J. (2019). A critical review of corrosion development and rust removal techniques on the structural/environmental performance of corroded steel bridges. Journal of Cleaner Production, 233, 126-146.

[36]. Ha, T., Cho, J., Park, J., Min, K., Kim, H. S., Lee, E., & Jyoung, J. Y. (2011). Experimental study on carbon corrosion of the gas diffusion layer in polymer electrolyte membrane fuel cells. International Journal of Hydrogen Energy, 36(19), 12436-12443.

[37]. Harsimran, S., Santosh, K., & Rakesh, K. (2021). Overview of corrosion and its control: A critical review. Proceedings on Engineering Sciences, 3(1), 13-24.

[38]. Hinton, B. R. W. (1992). Corrosion inhibition with rare earth metal salts. Journal of Alloys and Compounds, 180(1-2), 15-25.

[39]. Hladky, K., & Dawson, J. L. (1981). The measurement of localized corrosion using electrochemical noise. Corrosion Science, 21(4), 317-322.

[40]. Hoar, T. P. (1967). The production and breakdown of the passivity of metals. Corrosion Science, 7(6), 341-355.

[41]. Holmes, P. R., & Crundwell, F. K. (2000). The kinetics of the oxidation of pyrite by ferric ions and dissolved oxygen: an electrochemical study. Geochimica et Cosmochimica Acta, 64(2), 263-274.

[42]. Inoue, S., & Kawanishi, S. (1989). ESR evidence for superoxide, hydroxyl radicals and singlet oxygen produced from hydrogen peroxide and nickel (II) complex of glycylglycyl-L-histidine. Biochemical and Biophysical Research Communications, 159(2), 445-451.

[43]. Jacobson, N. S. (1993). Corrosion of silicon based ceramics in combustion environments. Journal of the American Ceramic Society, 76(1), 3-28.

[44]. Jia, M., Hu, P., Gong, Z., Xue, Y., Hou, Y., Sun, J., ... & Hu, G. (2021). Structure of Corrosion Layers on Archaeological Iron Artifacts from Nanhai I. Research Square (pp.1-20).

[45]. Kim, C., Karayan, A. I., Milla, J., Hassan, M., & Castaneda, H. (2020). Smart coating embedded with pH-responsive nanocapsules containing a corrosion inhibiting agent. ACS Applied Materials & Interfaces, 12(5), 6451-6459.

[46]. Krinsley, D. H., & Doornkamp, J. C. (2011). Atlas of Quartz Sand Surface Textures. Cambridge University Press.

[47]. Kristensen, A., Yang, J. K., Bozhevolnyi, S. I., Link, S., Nordlander, P., Halas, N. J., & Mortensen, N. A. (2016). Plasmonic colour generation. Nature Reviews Materials, 2(1), 1-14.

[48]. Kumar, K., Kumar, S., & Gill, H. S. (2023). Role of surface modification techniques to prevent failure of components subjected to the fireside of boilers. Journal of Failure Analysis and Prevention, 23(1), 1-15.

[49]. Kumar, M., Kant, S., & Kumar, S. (2019a). Corrosion behavior of wire arc sprayed Ni-based coatings in extreme environment. Materials Research Express, 6(10), 106427.

[50]. Kumar, R., & Kumar, S. (2018a). Comparative parabolic rate constant and coating properties of nickel, cobalt, iron and metal oxide based coating: A review. imanager's Journal on Material Science, 6(1), 45-56.

[51]. Kumar, R., & Kumar, S. (2018b). Thermal spray coating: a study. International Journal of Engineering Sciences & Research Technology, 7(3), 610-617.

[52]. Kumar, R., Kumar, R., & Kumar, S. (2018a). Erosion corrosion study of HVOF sprayed thermal sprayed coating on boiler tubes: A review. International Journal of Science and Management Studies (IJSMS), 1(3), 1-6.

[53]. Kumar, R., Singh, R., & Kumar, S. (2018b). Erosion and hot corrosion phenomena in thermal power plant and their preventive methods: A study. Asian Journal of Mechanical Engineering, 7(1), 38-45.

[54]. Kumar, S. (2022). Influence of processing conditions on the mechanical, tribological and fatigue performance of cold spray coating: A review. Surface Engineering, 38(4), 324-365.

[55]. Kumar, S., & Kumar, M. (2022). Tribological and mechanical performance of coatings on piston to avoid failure-A review. Journal of Failure Analysis and Prevention, 22(4), 1346-1369.

[56]. Kumar, S., & Kumar, R. (2021). Influence of processing conditions on the properties of thermal sprayed coating: A review. Surface Engineering, 37(11), 1339-1372.

[57]. Kumar, S., Handa, A., & Kumar, R. (2019b). Overview of wire arc spray process: A review. A Journal of Composition Theory, 12(7), 900-907.

[58]. Kumar, S., Handa, A., Chawla, V., Grover, N. K., & Kumar, R. (2021). Performance of thermal-sprayed coatings to combat hot corrosion of coal-fired boiler tube and effect of process parameters and post-coating heat treatment on coating performance: A review. Surface Engineering, 37(7), 833-860.

[59]. Kumar, S., Kumar, M., & Handa, A. (2018c). Combating hot corrosion of boiler tubes–A study. Engineering Failure Analysis, 94, 379-395.

[60]. Kumar, S., Kumar, M., & Handa, A. (2019c). Comparative study of high temperature oxidation behavior and mechanical properties of wire arc sprayed NiCr and NiAl coatings. Engineering Failure Analysis, 106, 104173.

[61]. Kumar, S., Kumar, M., & Handa, A. (2019d). High temperature oxidation and erosion-corrosion behaviour of wire arc sprayed Ni-Cr coating on boiler steel. Materials Research Express, 6(12), 125533.

[62]. Kumar, S., Kumar, M., & Handa, A. (2020a). Erosion corrosion behaviour and mechanical properties of wire arc sprayed Ni-Cr and Ni-Al coating on boiler steels in a real boiler environment. Materials at High Temperatures, 37(6), 370-384.

[63]. Kumar, S., Kumar, M., & Jindal, N. (2020b). Overview of cold spray coatings applications and comparisons: A critical review. World Journal of Engineering, 17(1), 27-51.

[64]. Kumar, S., Kumar, R., Singh, S., Singh, H., & Handa, A. (2020c). The role of thermal spray coating to combat hot corrosion of boiler tubes: A study. Journal of Xidian University, 14(5), 229-239.

[65]. Leblanc, P., & Frankel, G. S. (2002). A study of corrosion and pitting initiation of AA2024-T3 using atomic force microscopy. Journal of the Electrochemical Society, 149(6), B239.

[66]. Lee, W., & Park, S. J. (2014). Porous anodic aluminum oxide: anodization and templated synthesis of functional nanostructures. Chemical Reviews, 114(15), 7487-7556.

[67]. Liang, Y., Dong, H., Aurbach, D., & Yao, Y. (2020). Current status and future directions of multivalent metalion batteries. Nature Energy, 5(9), 646-656.

[68]. Liu, C., Tian, Y., & Meng, Y. (2021). A chemical potential equation for modeling triboelectrochemical reactions on solid–liquid interfaces. Frontiers in Chemistry, 9, 650880.

[69]. Liu, L., Li, Y., & Wang, F. (2010). Electrochemical corrosion behavior of nanocrystalline materials-A review. Journal of Materials Science & Technology, 26(1), 1-14.

[70]. Lucasson, P. G., & Walker, R. M. (1962). Production and recovery of electron-induced radiation damage in a number of metals. Physical Review, 127(2), 485.

[71]. Maa, J. S., Gossenberger, H., & Paff, R. J. (1990). Effect of post etch treatment on chlorine concentration of AlSi and Ti capped AlSi films. Journal of Vacuum Science & Technology B: Microelectronics Processing and Phenomena, 8(5), 1052-1057.

[72]. Mansfeld, F., Hengstenberg, D. H., & Kenkel, J. V. (1974). Galvanic corrosion of Al alloys I. Effect of dissimilar metal. Corrosion, 30(10), 343-353.

[73]. Norman, K. A., Polyn, S. M., Detre, G. J., & Haxby, J. V. (2006). Beyond mind-reading: multi-voxel pattern analysis of fMRI data. Trends in Cognitive Sciences, 10(9), 424-430.

[74]. North, N. A., & MacLeod, I. D. (1987). Corrosion of metals. In Conservation of Marine Archaeological Objects (pp. 68-98). Butterworth-Heinemann.

[75]. Ogude, N. A., & Bradley, J. D. (1996). Electrode processes and aspects relating to cell emf, current, and cell components in operating electrochemical cells: Precollege and college student interpretation. Journal of Chemical Education, 73(12), 1145.

[76]. Ohkuma, S., & Poole, B. (1978). Fluorescence probe measurement of the intralysosomal pH in living cells and the perturbation of pH by various agents. Proceedings of the National Academy of Sciences, 75(7), 3327-3331.

[77]. Parent, L., Twiss, M. R., & Campbell, P. G. (1996). Influences of natural dissolved organic matter on the interaction of aluminum with the microalga Chlorella: a test of the free-ion model of trace metal toxicity. Environmental Science & Technology, 30(5), 1713-1720.

[78]. Parker, C. D. (1951). Mechanics of corrosion of concrete sewers by hydrogen sulfide. Sewage and Industrial Wastes, 1477-1485.

[79]. Pedeferri, P. (1996). Cathodic protection and cathodic prevention. Construction and Building Materials, 10(5), 391-402.

[80]. Piotrowska, K., Verdingovas, V., & Ambat, R. (2018). Humidity-related failures in electronics: effect of binary mixtures of weak organic acid activators. Journal of Materials Science: Materials in Electronics, 29, 17834-17852.

[81]. Ponchet, A., Combettes, S., Benzo, P., Tarrat, N., Casanove, M. J., & Benoit, M. (2020). Equilibrium shape of core (Fe)–shell (Au) nanoparticles as a function of the metals volume ratio. Journal of Applied Physics, 128(5), 055307.

[82]. Popoola, A. P. I., Olorunniwo, O. E., & Ige, O. O. (2014). Corrosion resistance through the application of anti-corrosion coatings. Developments in Corrosion Protection, 13(4), 241-270.

[83]. Porter, F. C., Stoneman, A. M., & Thilthorpe, R. G. (1988). The range of zinc coatings. Transactions of the IMF, 66(1), 28-33.

[84]. Pye, D. (2003). Practical Nitriding and Ferritic Nitrocarburizing. ASM International.

[85]. Roberge, P. R. (2008). Corrosion Engineering: Principles and Practice. McGraw-Hill Education.

[86]. Romanoff, M. (1964). Exterior corrosion of cast iron pipe. Journal American Water Works Association, 56(9), 1129-1143.

[87]. Rossotti, H. (1985). Colour: Why the world isn't Grey (Vol. 3). Princeton University Press.

[88]. Salleh, S. Z., Yusoff, A. H., Zakaria, S. K., Taib, M. A. A., Seman, A. A., Masri, M. N., ... & Ter Teo, P. (2021). Plant extracts as green corrosion inhibitor for ferrous metal alloys: A review. Journal of Cleaner Production, 304, 127030.

[89]. Sánchez-Sánchez, M., Getachew, N., Díaz, K., DíazGarcía, M., Chebude, Y., & Díaz, I. (2015). Synthesis of metal–organic frameworks in water at room temperature: salts as linker sources. Green Chemistry, 17(3), 1500-1509.

[90]. Sharland, S. M. (1987). A review of the theoretical modelling of crevice and pitting corrosion. Corrosion Science, 27(3), 289-323.

[91]. Sharma, M., Jindal, H., Kumar, D., Kumar, S., & Kumar, R. (2021). Overview on corrosion, classification and control measure: a study. i-manager's Journal on Future Engineering & Technology, 17(2), 26-36.

[92]. Sharma, V., Kumar, S., Kumar, M., & Deepak, D. (2020). High temperature oxidation performance of NiCr-Ti and Ni-5Al coatings. Materials Today: Proceedings, 26(3), 3397-3406.

[93]. Sheasby, P. G., Pinner, R., & Wernick, S. (2001). The Surface Treatment and Finishing of Aluminium and Its Alloys. ASM International, Materials Park.

[94]. Singh, R., & Dahotre, N. B. (2007). Corrosion degradation and prevention by surface modification of biometallic materials. Journal of Materials Science: Materials in Medicine, 18(5), 725-751.

[95]. Singh, S., Kumar, S., & Khanna, V. (2023). A review on surface modification techniques. Materials Today: Proceedings.

[96]. Song, G., & Atrens, A. (2003). Understanding magnesium corrosion—a framework for improved alloy performance. Advanced Engineering Materials, 5(12), 837-858.

[97]. Stratmann, M., & Müller, J. (1994). The mechanism of the oxygen reduction on rust-covered metal substrates. Corrosion Science, 36(2), 327-359.

[98]. Tamura, H. (2008). The role of rusts in corrosion and corrosion protection of iron and steel. Corrosion Science, 50(7), 1872-1883.

[99]. Tang, Z. (2019). A review of corrosion inhibitors for rust preventative fluids. Current Opinion in Solid State and Materials Science, 23(4), 100759.

[100]. Tavakkolizadeh, M., & Saadatmanesh, H. (2001). Galvanic corrosion of carbon and steel in aggressive environments. Journal of Composites for Construction, 5(3), 200-210.

[101]. Townsend, T. M., Allanic, A., Noonan, C., & Sodeau, J. R. (2012). Characterization of sulfurous acid, sulfite, and bisulfite aerosol systems. The Journal of Physical Chemistry A, 116(16), 4035-4046.

[102]. Turgoose, S. (1982). Post-excavation changes in iron antiquities. Studies in Conservation, 27(3), 97-101.

[103]. Wasim, M., Shoaib, S., Mubarak, N. M., & Asiri, A. M. (2018). Factors influencing corrosion of metal pipes in soils. Environmental Chemistry Letters, 16, 861-879.

[104]. Yang, F., Shi, B., Gu, J., Wang, D., & Yang, M. (2012). Morphological and physicochemical characteristics of iron corrosion scales formed under different water source histories in a drinking water distribution system. Water Research, 46(16), 5423-5433.

[105]. Yazdanbakhsh, A., Grasley, Z., Tyson, B., & Al-Rub, R. K. A. (2010). Distribution of carbon nanofibers and nanotubes in cementitious composites. Transportation Research Record, 2142(1), 89-95.

[106]. Yusoff, W. Y. W., & Yunus, W. M. M. (2003). Thermal diffusivity measurement of abrasive paper using photoacoustic technique. Pertanika Journal of Science & Technology, 11(2), 301-309.

[107]. Zaid, B., Saidi, D., Benzaid, A., & Hadji, S. (2008). Effects of pH and chloride concentration on pitting corrosion of AA6061 aluminum alloy. Corrosion Science, 50(7), 1841-1847.

[108]. Zhang, R., Castel, A., & François, R. (2009). The corrosion pattern of reinforcement and its influence on serviceability of reinforced concrete members in chloride environment. Cement and Concrete Research, 39(11), 1077-1086.

Corrosion: Types, Theories and Preventive Measure

Abstract

Keywords

How to Cite this Article?

References

If you have access to this article please login to view the article or kindly login to purchase the article

Purchase Instant Access

Options for accessing this content:

	North Americas,UK, Middle East,Europe		India	Rest of world
	USD	EUR	INR	USD-ROW
Pdf	35	35	200	20
Online	35	35	200	15
Pdf & Online	35	35	400	25