References
[1]. Abrams D. (1918). “Design of concrete mixtures”. Bulletin No.1 Structural Materials Research Laboratory, Lewis Institute Chicago, pp. 20.
[2]. Bolomey, J. (1927). “Durecissenment des mortiers ets Benton”. Tech. Suisse Romande Nos. 16, 22 and 24.–2.4.1.
[3]. Cengiz Duran Atis, Cahit Bilim, O¨ zlem C¸ elik , Okan Karahan. (2007). “Influence of activator on the strength and drying Shrinkage of alkali-activated slag mortar”, Constr Build Mater, doi:10.1016/j.conbuildmat. 2007.10.011.
[4]. Douglas. E., and J. Brandstetr (1990). “A Preliminary Study on The Alkali Activation of Ground Granulated Blast-Furnace Slag“., Cement and Concrete Research, Vol. 20, pp. 746-756.
[5]. Fernandez.- Jimenez, A.M., Palomo, A., and Criado, M. (2005). “Microstructure development of alkali activated fly ash cement: a descriptive model. Cement and Concrete research 35 : 1204- 1209.
[6]. Fernandez.- Jimenez, A. M., Palomo, A. and Lopez- Hombrados, C. (2006). “Engineering Properties of Alkali –Activated Fly ash Concrete” ACI Materials Journal. 103(2) : 106- 112.
[7]. Hardjito, D., Wallah, S.E, Sumajouw, D.M.J., and Rangan, B.V. (2004). “On the development of fly ash based Geopolymer concrete.” ACI Materials Journal – Nov-Dec 2004 Title no 101-MT, 101(6), 457-472.
[8]. Malhotra, V.M. and Mehtha. P.K. (2002). “High –Performance, High Volume Fly ash Concrete”Supplimentary Cementing Materials for Sustainable Development Inc. Ottawa Canada : 101p.
[9]. Nagaraj, T.S., Shashiprakash, S.G. and Raghuprasad, B.K. (1993). “Reproportioning of concrete mixes”, Materials Journal, American Concrete Institute, 90 (1) : 50 -58.
[10]. Nagaraj, T.S. and Zahida Banu, (1996). “Generalization of Abram's Law”. Cement and Concrete Research, Elsevier Science, 26(6): 933 – 942.
[11]. Nataraj, M.C., Dhang, N. and Gupta, A.P., (1997). “Computer aided concrete mix proportioning”, The Indian concrete Journal, Vol 71. No.9. pp 487-492, September.
[12]. Nataraj, M.C., Dhang, N. and Gupta, A.P. (1999). “A simple equation for concrete mix design cures of IS 10262:1982”, The Indian concrete Journal, Vol 73. No.2, pp 111-115, February.
[13]. Palomo, A. Fernandez – Jimenez and G. Kovalchuk, G. (2005). “Some Key factors affecting the Alkali Activation of Fly ash”, Proceedings of the 2nd International Symposium Non – Traditional Cement & Concrete, Brno University of Technology, ISBN 80-124-2583-8,June 14-16, 2005, 1-12.
[14]. Palomo. A, Grutzerch, M.W. and Blanco M.T. (1999). “Alkali activated fly ashes – A cement for the future” Cement and concrete research, Elsevier science : 1323 – 1329.
[15]. Park, Sang-Sook and Kang. Hwa –Young, (2006). “Strength and Microscopic Characteristics of Alkali Activated Fly ash Cement”, Korean J. Chem. Eng. 23(3) : 367 -373.
[16]. Rangan, B.V. (2008). “Fly Ash-Based Geopolymer Concrete”, Research Report GC 4 Engineering Faculty Curtin University of Technology Perth, Australia.
[17]. Rangan, B.V., Wallah, S., Sumajouw, D., and Hardito, D. (2006). “Heat –cured, Low –Calcium, Fly ash based Geopolmer Concrete”, The Indian Concrete Journal 80(6) : 47- 52.
[18]. Road Research Laboratory. (1950). “Design of Concrete Mixes. Road Note Number 4”, 2nd Edition, London, HMSO - 2.4.2.
[19]. Techenne, D.C., Nicholls, J.C., Franklin, R.E., and Hobbs, D. (1988). “Design of normal concrete mixes”, published by the Department of environment, HMSO ,1-42.
[20]. Weil. M. Dombrowski, K., & Buchwald, A. (2005). “Development of Geoolymers Supported by System Analysis” Proceedings. Of the 2nd International Symposium Non – Traditional Cement & Concrete, Brno University of Technology, ISBN 80-124-2583-8,June 14-16, 2005, 25-31.
[21]. Zhang, Y., and Wei Sun (2006). “Fly ash based Geopolymer Concrete” The Indian Concrete Journal 80(1) : 20 – 24.
[22]. Temuujin J., van Riessen A., & MacKenzie K.J.D. (2010). Preparation and characterisation of fly ash based geopolymer mortars Construction and Building Materials 24, 1906–1910.
[23]. Zhang Zu-hua, Yao Xiao, ZHU Hua-jun, Hua Su-dong, Chen Yue, (2009). Preparation and mechanical properties of polypropylene fiber reinforced calcined kaolin-fly ash based geopolymer, J. Cent. South Univ. Technol. 16: 0049?0052.
[24]. Kamseu E., A. Rizzuti, C. Leonelli, and D. Perera, (2010). Enhanced thermal stability in K2O-metakaolin-based geopolymer concretes by Al2O3 and SiO2 fillers addition Journal of Material science, April, Vol. 45, No. 4,PP 1715-1724.
[25]. Radhakrishna, Shashishankar A., and T.S. Nagaraj., Phenomenological Model for Assessment of Strength Development in Class F -Fly Ash Based Geopolymer Mortar, The Indian Concrete Institute Journal, 2006, (1): 23-27.
[26]. Radhakrishna, Shashishankar A., Udayashankar.B.C and Renuka Devi. M.V., (2010) Compressive Strength Assessment of Geopolymer Composites by a Phenomenological Model, Journal of Reinforced Plastics and Composites,29(6): 840-853, doi:10.1177/0731684408100703.
[27]. Radhakrishna, Shashishankar A., and Udayashankar. B.C.(2008). Analysis and Assessment of Strength Development in Class F Fly Ash Based Compressed Geopolymer Blocks, The Indian Concrete Journal, ,82(8):31-37.
[28]. Radhakrishna, Shashishankar A., and Udayashankar. B.C., Phenomenological Model To Re-Proportion Geopolymer Compressed Blocks, Proceedings of 33rd Conference on Our World in Concrete and Structures – 2008, Singapore, 2008, ISBN:978-981-08-0412-1, pp.365-374.
[29]. ACI Committee 211.1-91, (1994) “Standard practice for practice for selecting proportions for normal, heavy weight, and mass concrete”, American Concrete Institute manual of concrete practice, part 1: Materials and General properties of concrete, pp38 (Detroit, Michigan, 1994).
