Development of Car-Tailpipe Fuel Emission Models due to the Effects Road Gradient and Roughness

0*, M. Akshith Reddy**, N. Yashwanth***, O. Pranaya ****, E. Anvesh Yadav*****
*-***** Department of Civil Engineering, University College of Engineering, Osmania University, Hyderabad, India.
Periodicity:September - November'2019
DOI : https://doi.org/10.26634/jce.9.4.14718

Abstract

The vehicle emission is an important effectiveness measurement of any sustainable transportation development. Geometric and surface characteristics of pavement play an important role in reduction in fuel-economy and greenhouse gas emission. Deterioration of pavement surface is considered as the basic problem, which increases in fuel consumption, which leads to increase in emissions. The aim of the present research work is to provide better understanding on the role of pavement characteristics in green transportation initiates. Evaluating the effects of these emissions based on the roughness characteristics and the effect of gradient is the objective of the research. The field data collection surveys were conducted on two stretches in and around OU campus, viz., (i) OUCT road and (ii) DD colony A-lane. Roughness measurement surveys were conducted on these selected stretches by using MERLIN. The vehicular emissions of Alto and Swift petrol cars were measured by using AVL Di-gas 444 analyzer. Comparisons were made for emissions on these different stretches against roughness and gradient of these two roads. The comparisons show considerable percentage increase in emissions on the stretches with higher roughness and gradient. As the objectives intended, the impact of pavement roughness on vehicular emission is related to roughness and gradient and the regression equations were developed to estimate four types of vehicular emissions. Based on the impact of gradient on vehicular emissions, the geometric design engineer can adopt the minimum level of gradient to be used while designing new roads.

Keywords

Road gradient, Road roughness and Vehicular emissions.

How to Cite this Article?

Kumar, R. S., Reddy, M. A., Yashwanth, N., Pranaya, O., and Yadav, E. A. (2019). Development of Car - Tailpipe Fuel Emission Models Due to the Effects Road Gradient and Roughness. i-manager's Journal on Civil Engineering, 9(4), 29-37. https://doi.org/10.26634/jce.9.4.14718

References

[1]. Andre, M. (1996). Driving cycles development: Characterization of the methods. SAE Technical Paper (pp. 1-15). https://doi.org/10.4271/961112
[2]. Beusen, B., Broekx, S., Denys, T., Beckx, C., Degraeuwe, B., Gijsbers, M., ... & Panis, L. I. (2009). Using on-board logging devices to study the longer-term impact of an ecodriving course. Transportation Research Part D: Transport and Environment, 14(7), 514-520. https://doi.org/10.1016/ j.trd.2009.05.009
[3]. Boulter, P. G., & Cox, J. A. (1999). A Review of European Emission Measurements and Models for Diesel-Fuelled Buses. Crowthorne, UK (pp. 1-28).
[4]. Cundill, M. A. (1996). The Merlin Road Roughness Machine: User Guide. The National Academies of Sciences, Engineering, and Medicine, Washington.
[5]. Hassel, D., & Weber, F. J. (1997). Gradient Influence on Emission and Consumption Behaviour of Light and Heavy Duty Vehicles. MEET Project deliverable, Cologne, Germany.
[6]. Keller, M., Evequoz, R., Heldstab, J., & Kessler, M. (1995). Luftschadstoff – Emissionen des Strassenverkehrs 1950 – 2010. Dokumentationsdienst, BUWAL.
[7]. Lidicker, J., Sathaye, N., Madanat, S., & Horvath, A. (2012). Pavement resurfacing policy for minimization of lifecycle costs and greenhouse gas emissions. Journal of Infrastructure Systems, 19(2), 129-137. https://doi.org/ 10.1061/(ASCE)IS.1943-555X.0000114
[8]. Rakha, H., & Ding, Y. (2003). Impact of stops on vehicle fuel consumption and emissions. Journal of Transportation Engineering, 129(1), 23-32. https://doi.org/10.1061/(ASCE) 0733-947X(2003)129:1(23)
[9]. Rouphail, N. M., Frey, H. C., Colyar, J. D., & Unal, A. (2001, January). Vehicle emissions and traffic measures: Exploratory analysis of field observations at signalized arterials. In 80th Annual Meeting of the Transportation Research Board, Washington, DC (pp.1-26).
[10]. Shukla, A., & Alam, M. (2010). Assessment of real world on-road vehicle emissions under dynamic urban traffic conditions in Delhi. International Journal of Urban Sciences, 14(2), 207-220. https://doi.org/10.1080/ 12265934.2010.9693677
[11]. Wyatt, D. W., Li, H., & Tate, J. E. (2014). The impact of road grade on carbon dioxide (CO2) emission of a passenger vehicle in real-world driving. Transportation Research Part D: Transport and Environment, 32, 160-170. https://doi.org/10.1016/j.trd.2014.07.015
[12]. Zhang, K., & Frey, H. C. (2006). Road grade estimation for on-road vehicle emissions modeling using light detection and ranging data. Journal of the Air & Waste Management Association, 56(6), 777-788. https://doi.org/ 10.1080/10473289.2006.10464500
[13]. Zhang, W., Lu, J., Xu, P., & Zhang, Y. (2015). Moving towards sustainability: Road grades and on-road emissions of heavy-duty vehicles - A case study. Sustainability, 7(9), 12644-12671. https://doi.org/10.3390/su70912644
If you have access to this article please login to view the article or kindly login to purchase the article

Purchase Instant Access

Single Article

North Americas,UK,
Middle East,Europe
India Rest of world
USD EUR INR USD-ROW
Online 15 15

Options for accessing this content:
  • If you would like institutional access to this content, please recommend the title to your librarian.
    Library Recommendation Form
  • If you already have i-manager's user account: Login above and proceed to purchase the article.
  • New Users: Please register, then proceed to purchase the article.