i-manager Publications

Development and Performance Evaluation of Magnetic Abrasive Finishing Setup for Thick Cylinders

Gursharan Singh*, Lakhvir Singh**

* Research Scholar, IK Gujral Punjab Technical University, Kapurthala, India

** Professor and Head, Department of Mechanical Engineering, Baba Banda Singh Bahadur Engineering College, Punjab, India.

Periodicity:November - January'2018
DOI : https://doi.org/10.26634/jfet.13.2.13870

Abstract

A magnetic abrasive finishing process is a method of non-traditional precision machining in which the finishing process is completed using magnetic force and magnetic abrasives. In this research, SUS 304 thick cylindrical tube was finished using a magnetic abrasive finishing process with the objective of development of new MAF setup for finishing of Thick Tubes, to study finishing performance of developed MAF setup for internal finishing of stainless steel tubes (SUS 304) using diamond based sintered magnetic abrasives. This paper describes the development of the high-speed multiple pole finishing equipment and the effects of tube rotational speed on abrasive motion during the finishing experiments.

Keywords

Magnetic Abrasive Finishing, Flexible Magnetic Abrasive Brush, Scanning Electron Microscope, Magnetic Abrasive Particles, Percentage Improvement in Surface Finish

How to Cite this Article?

Gandhi, G. S., and Singh, L. (2018). Development and Performance Evaluation of Magnetic Abrasive Finishing Setup for Thick Cylinders. i-manager’s Journal on Future Engineering and Technology, 13(2), 37-44. https://doi.org/10.26634/jfet.13.2.13870

References

[1]. Chang, G. W., Yan, B. H., & Hsu, R. T. (2002). Study on cylindrical magnetic abrasive finishing using unbonded magnetic abrasives. International Journal of Machine Tools and Manufacture, 42(5), 575-583.

[2]. Fox, M., Agrawal, K., Shinmura, T., & Komanduri, R. (1994). Magnetic abrasive finishing of rollers. CIRP Annals- Manufacturing Technology, 43(1), 181-184.

[3]. Givi, M., Tehrani, A. F., & Mohammadi, A. (2012). Polishing of the aluminum sheets with magnetic abrasive finishing method. The International Journal of Advanced Manufacturing Technology, 61(9-12), 989-998.

[4]. Jain, V. K. (2009). Magnetic field assisted abrasive based micro-/nano-finishing. Journal of Materials Processing Technology, 209(20), 6022-6038.

[5]. Jain, V. K., Kumar, P., Behera, P. K., & Jayswal, S. C. (2001). Effect of working gap and circumferential speed on the performance of magnetic abrasive finishing process. Wear, 250(1-12), 384-390.

[6]. Lambropoulos, J. C., Miao, C., & Jacobs, S. D. (2010). Magnetic field effects on shear and normal stresses in magnetorheological finishing. Optics Express, 18(19), 19713-19723.

[7]. Lee, Y. H., Wu, K. L., Jhou, J. H., Tsai, Y. H., & Yan, B. H. (2013). Two-dimensional vibration-assisted magnetic abrasive finishing of stainless steel SUS304. The International Journal of Advanced Manufacturing Technology, 69(9-12), 2723-2733.

[8]. Mori, T., Hirota, K., & Kawashima, Y. (2003). Clarification of magnetic abrasive finishing mechanism. Journal of Materials Processing Technology, 143, 682- 686.

[9]. Saraeian, P., Mehr, H. S., Moradi, B., Tavakoli, H., & Alrahmani, O. K. (2016). Study of Magnetic Abrasive Finishing for AISI321 Stainless Steel. Materials and Manufacturing Processes, 31(15), 2023-2029.

[10]. Shinmura, T., Takazawa, K., Hatano, E., Matsunaga, M., & Matsuo, T. (1990). Study on magnetic abrasive finishing. CIRP Annals-Manufacturing Technology, 39(1), 325-328.

[11]. Singh, D. K., Jain, V. K., & Raghuram, V. (2003). 236 Experimental Investigations into Magnetic Abrasive Finishing of Alloy Steel. In Proceedings of International Conference on Leading Edge Manufacturing in 21^st century: LEM21 2003 (pp. 403-408). The Japan Society of Mechanical Engineers.

[12]. Sran, L. S., Khangura, S. S., & Singh, A. (2012, June). Nano finishing of brass tubes by using mechanically alloyed magnetic abrasives. In ASME 2012 International Manufacturing Science and Engineering Conference collocated with the 40^th North American Manufacturing Research Conference and in participation with the International Conference on Tribology Materials and Processing (pp. 933-941). American Society of Mechanical Engineers.

[13]. Wang, Y. & Hu, D. (2005). Study on the inner surface finishing of tubing by magnetic abrasive finishing. International Journal of Machine Tools and Manufacture, 45(1), 43-49.

[14]. Wang, Y., Hu, D. J., & Deng, Q. L. (2004). Study on internal magnetic abrasive finishing of thin and long austenitic stainless steel tube. In Key Engineering Materials (Vol. 259, pp. 620-625). Trans Tech Publications.

[15]. Yamaguchi, H. & Shinmura, T. (2000). Study of an internal magnetic abrasive finishing using a pole rotation system: Discussion of the characteristic abrasive behavior. Precision Engineering, 24(3), 237-244.

[16]. Yamaguchi, H., Shinmura, T., & Ikeda, R. (2007). Study of internal finishing of austenitic stainless steel capillary tubes by magnetic abrasive finishing. Journal of Manufacturing Science and Engineering, 129(5), 885- 892.

[17]. Yamaguchi, H., Shinmura, T., & Sekine, M. (2005). Uniform internal finishing of SUS304 stainless steel bent tube using a magnetic abrasive finishing process. Journal of manufacturing Science and Engineering, 127(3), 605- 611.

[18]. Yin, S. & Shinmura, T. (2004). Vertical vibration-assisted magnetic abrasive finishing and deburring for magnesium alloy. International Journal of Machine Tools and Manufacture, 44(12-13), 1297-1303.

If you have access to this article please login to view the article or kindly login to purchase the article

Single Article

	North Americas,UK, Middle East,Europe		India	Rest of world
	USD	EUR	INR	USD-ROW
Online	15	15

ADD TO CART

Options for accessing this content:

If you would like institutional access to this content, please recommend the title to your librarian.
If you already have i-manager's user account: Login above and proceed to purchase the article.
New Users: Please register, then proceed to purchase the article.