References
[1]. Admile, B., Kulkarni, S. G., & Sonawane, S. A. (2014).
Review on mechanical and wear behavior of aluminum-fly
ash metal matrix composite. International Journal of
Emerging Technology and Advanced Engineering, 4, 863-
866.
[2] Adole, M. A., Dzasu, W. E., Umar, A., & Oraegbune, O.
M. (2011). Effects of groundnut husk ash-blended cement
on chemical resistance of concrete. ATBU Journal of
Environmental Technology, 4(1), 23-32.
[3]. Aigbodion, V. S., Hassan, S. B., & Oghenevweta, J. E.
(2010a). Microstructural analysis and properties of
Al–Cu–Mg/bagasse ash particulate composites. Journal of
Alloys and Compounds, 497(1), 188-194.
[4]. Aigbodion, V. S., Hassan, S. B., Dauda, E. T., &
Mohammed, R. A. (2010b). The development of
mathematical model for the prediction of ageing behavior
for Al-Cu-Mg/bagasse ash particulate composites. Journal
of Minerals and Materials Characterization and
Engineering, 9(10), 907-917.
[5]. Alaneme, K. K., Ademilua, B. O., & Bodunrin, M. O.
(2013a). Mechanical Properties and Corrosion Behaviour of
Aluminium Hybrid Composites Reinforced with Silicon
Carbide and Bamboo Leaf Ash. Tribology in Industry, 35(1),
25-35.
[6]. Alaneme, K. K., Akintunde, I. B., Olubambi, P. A., &
Adewale, T. M. (2013b). Fabrication characteristics and
mechanical behavior of rice husk ash–Alumina reinforced
Al-Mg-Si alloy matrix hybrid composites. Journal of
Materials Research and Technology, 2(1), 60-67.
[7]. Alaneme, K. K., Henry Ikechukwu, E. Z. E., & Bodunrin,
M. O. (2015). Corrosion behavior of groundnut shell ash
and silicon carbide hybrid reinforced Al-Mg-Si alloy matrix
composites in 3.5% NaCl and 0.3 MH SO solutions. 2 4
Leonardo Electronic Journal of Practices and
Technologies, (26), 129-146.
[8]. Alaneme, K. K., Bodunrin, M. O., & Awe, A. A. (2016).
Microstructure, mechanical and fracture properties of
groundnut shell ash and silicon carbide dispersion
strengthened aluminium matrix composites. Journal of
King Saud University-Engineering Sciences.
[9]. Anilkumar, H. C., Hebbar, H. S., & Ravishankar, K. S.
(2011). Mechanical properties of fly ash reinforced
aluminium alloy (Al6061) composites. International Journal
of Mechanical and Materials Engineering, 6(1), 41-45.
[10]. Apasi, A., Madakson, P. B., Yawas, D. S., & Aigbodion,
V. S. (2012). Wear behavior of Al-Si-Fe alloy/coconut shell
ash particulate composites. Tribology in Industry, 1(34), 36-
43.
[11]. Bahrami, A., Soltani, N., Pech-Canul, M. I., &
Gutiérrez, C. A. (2016). Development of metal-matrix
composites from industrial/agricultural waste materials and
their derivatives. Critical Reviews in Environmental Science
and Technology, 46(2), 143-208.
[12]. Balakrishnan, M., & Batra, V. S. (2011). Valorization of solid waste in sugar factories with possible applications in
India: A review. Journal of Environmental Management,
92(11), 2886-2891.
[13]. Bamgboye, A. I., & Jekayinfa, S. O. (2006). Energy
consumption pattern in palm kernel oil processing
operations. Agricultural Engineering International: CIGR
Journal.
[14]. Barroso, J., Barreras, F., Amaveda, H., & Lozano, A.
(2003). On the optimization of boiler efficiency using
bagasse as fuel. Fuel, 82(12), 1451-1463.
[15]. Bhandare, R. G., & Sonawane, P. M. (2013).
Preparation of aluminium matrix composite by using stir
casting method. International Journal of Engineering and
Advanced Technology (IJEAT), 3, 2245-8958.
[16]. Daramola, O. O., Adediran, A. A., & Fadumiye, A. T.
(2015). Evaluation of the mechanical properties and
corrosion behavior of coconut shell ash reinforced
aluminium (6063) alloy composites. Leonardo Electronic
Journal of Practices and Technologies, (27), 107-119.
[17]. Das, S., Prasad, S. V., & Ramachandran, T. R. (1989).
Microstructure and wear of cast (Al-Si alloy)-graphite
composites. Wear, 133(1), 173-187.
[18]. Debnath, S., Lancaster, L., & Lung, M. H. (2013).
Utilization of Agro-Industrial Waste in Metal Matrix
Composites: Towards Sustainability. World Academy of
Science, Engineering and Technology, 1136-1144.
[19]. Fatile, O. B., Akinruli, J. I., & Amori, A. A. (2014).
Microstructure and mechanical behavior of stir-cast Al-Mg-
Sl alloy matrix hybrid composite reinforced with corn cob
ash and silicon carbide. International Journal of
Engineering and Technology Innovation, 4(4), 251-259.
[20]. Govindarajan, D., & Jayalakshmi, G. (2011). XRD, FTIR
and microstructure studies of calcined sugarcane
bagasse ash. Advances in Applied Science Research, 2(3),
544-549.
[21]. Hashim, J., Looney, L., & Hashmi, M. S. J. (1999). Metal
matrix composites: Production by the stir casting method.
Journal of Materials Processing Technology, 92, 1-7.
[22]. Jokhio, M. H., Panhwer, M. I., & Unar, M. A. (2016).
Manufacturing of aluminum composite material using stir
casting process. 1604.01251.
[23]. Kant S., & Verma, A. S. (2017). Stir Casting Process in
Particulate Aluminium Metal Matrix Composite: A Review.
International Journal of Mechanics and Solids, 9(1), 61-69.
[24]. Kesavulu A, Raju Anand. F, & Deva Kumar M.L.S.,
(2014). Properties of Aluminium fly Ash Metal Matrix
Composite. International Journal of Innovative Research in
Science, Engineering and Technology (IJIRSET), 3(11),
17160-17164.
[25]. Khan, M. Z., Anas, M., & Husain, A. (2015). Effect on
mechanical properties of aluminium alloy composites on
adding ash as reinforcement material. Journal of Metals,
Materials and Minerals, 25(2), 1-7.
[26]. Kumar R. Jegan J, & Initha L. (2014). Processing of
AMMC through stir casting route. Journal of Materials
Science, 2(12), 17-25.
[27]. Lancaster, L., Lung, M. H., & Sujan, D. (2013, January).
Utilization of agro-industrial waste in metal matrix
composites: towards sustainability. In Proceedings of World
Academy of Science, Engineering and Technology (No.
73, p. 1136), World Academy of Science, Engineering and
Technology (WASET).
[28]. Madakson, P. B., Yawas, D. S., & Apasi, A. (2012).
Characterization of coconut shell ash for potential
utilization in metal matrix composites for automotive
applications. International Journal of Engineering Science
and Technology, 4(3), 1190-1198.
[29]. Mahendra, K. V., & Radhakrishna, K. (2007).
Fabrication of Al-4.5% Cu alloy with fly ash metal matrix
composites and its characterization. Materials Science-
Poland, 25(1), 57-68.
[30]. Naher, S., Brabazon, D., & Looney, L. (2005).
Development and assessment of a new quick quench stir
caster design for the production of metal matrix
composites. Journal of Materials Processing Technology,
166(3), 430-439.
[31]. Naidu, A. L., Sudarshan, B., & Krishna, K. H. (2013).
Study on mechanical behavior of groundnut shell fiber
reinforced polymer metal matrix composites. International
Journal of Engineering Research and Technology, 2(2), 1-6,
ESRSA Publications.
[32]. Oghenevweta, J. E., Aigbodion, V. S., Nyior, G. B., &Asuke, F. (2016). Mechanical properties and
microstructural analysis of Al–Si–Mg/carbonized maize stalk
waste particulate composites. Journal of King Saud
University-Engineering Sciences, 28(2), 222-229.
[33]. Oriola, F., & Moses, G. (2010). Groundnut shell ash
stabilization of black cotton soil. Electronic Journal of
Geotechnical Engineering, 15, 415-428.
[34]. Patil, M. S. R., & Motgi, P. B. (2013). A Study on
Mechanical Properties of Fly Ash and Alumina Reinforced
Aluminium Alloy (LM25) Composites. IOSR Journal of
Mechanical and Civil Engineering (IOSR-JMCE), 7(6), 41-
46.
[35]. Pradeep, R., Kumar, B. P., & Prashanth, B. (2014).
Evaluation of mechanical properties of aluminium alloy
7075 reinforced with silicon carbide and red mud
composite. International Journal of Engineering Research
and General Science, 2(6).
[36]. Prasad, D. S., & Krishna, R. A. (2011). Production and
mechanical properties of A356. 2/RHA composites.
International Journal of Advanced Science and
Technology, 33, 51-58.
[37]. Prasad, N., & Acharya, S. K. (2006). Development and
Characterization of Metal Matrix Composite using Red
Mud an Industrial Waste for Wear Resistant Applications
and Development. (Doctoral Dissertation, National Institute
of Technology Rourkela).
[38]. Quader, S. M., Murthy, B. S., & Reddy, P. R. (2016).
Processing and Mechanical Properties of Al O and Red 2 3
Mud Particle Reinforced AA6061 Hybrid Composites.
Journal of Minerals and Materials Characterization and
Engineering, 4(2), 135.
[39]. Rao, V. R. K., Chowdary, J. R., Balaji, A., & Sai, D.
(2016). A Review on Properties of Aluminium Based Metal
Matrix Composites via Stir Casting. International Journal of
Scientific and Engineering Research, 7(2), 742-749.
[40]. Ravesh, S. K., & Garg, T. K. (2012). Preparation and
analysis for some mechanical property of aluminium
based metal matrix composite reinforced with SiC and fly
ash. International Journal of Engineering Research and
Applications, 2(6), 727-731.
[41]. Ray, S. (1969). Master of Engineering Dissertation, Dissertation, Indian Institute of Technology Kanpur.
[42]. Reddy, R., Kumar, S., Suneel M., Prasad., & Avinash,
(2017). Studies of Microstructure, Mechanical and
Tribological behavior of Aluminium can composites.
International Digital Library of Technology & Research,1(3),
1-7.
[43]. Rohatgi, P. K. (1994). Low-cost, fly-ash-containing
aluminum-matrix composites. Journal of the Minerals,
Metals and Materials Society, 46(11), 55-59.
[44]. Safiuddin, M., Jumaat, M. Z., Salam, M. A., Islam, M.
S., & Hashim, R. (2010). Utilization of solid wastes in
construction materials. International Journal of Physical
Sciences, 5(13), 1952-1963.
[45]. Saravanan, S. D., & Kumar, M. S. (2013). Effect of
mechanical properties on rice husk ash reinforced
aluminum alloy (AlSi10Mg) matrix composites. Procedia
Engineering, 64, 1505-1513.
[46]. Sharma, P., Chauhan, G., & Sharma, N. (2011).
Production of AMC by stir casting: An overview.
International Journal of Contemporary Practices, 2(1), 23-
46.
[47]. Sharma A. (2015). Development and Analysis of
Aluminium Matrix Composite from Bagasse Ash Waste
(Master of Engineering Dissertation, PEC University of
Technology Chandigarh).
[48]. Sijo, M. T., & Jayadevan, K. R. (2016). Analysis of Stir
Cast Aluminium Silicon Carbide Metal Matrix Composite: A
Comprehensive Review. Procedia Technology, 24, 379-
385.
[49]. Singh, J., Suri, N. M., & Verma, A., (2015). Effect of
mechanical properties on groundnut shell ash reinforced
Al6063. International Journal For Technological Research
In Engineering, 2(11), 2619-2623.
[50]. Surappa, M. K., & Rohatgi, P. K. (1981). Preparation
and properties of cast aluminium-ceramic particle
composites. Journal of Materials Science, 16(4), 983-993.
[51]. Torralba, J. M., Da Costa, C. E., & Velasco, F. (2003).
P/M aluminum matrix composites: An overview. Journal of
Materials Processing Technology, 133(1), 203-206.
[52]. Tripathy, S. (2009). Studies on Aluminum–Fly-Ash
Composite Produced by Impeller Mixing (Doctoral Dissertation, National Institute of Technology Rourkela).
[53]. Usman, A. M., Raji, A., Hassan, M. A., & Waziri, N. H.
(2014a). A comparative study on the properties of Al-7% Si-
Rice husk ash and Al-7% Si-Bagasse ash composites
produced by stir casting. The International Journal of
Engineering and Science (IJES), 3, 1-7.
[54]. Usman, A. M., Raji, A., Waziri, N. H., & Hassan, M. A.
(2014b). A study on silica and alumina potential of the
savannah bagasse ash. Journal of Mechanical and Civil
Engineering (IOSR), 11(3), 48-52.
[55]. Verma, A. S., Suri, N. M., & Kant, S. (2012). Effect of
Process parameter of AL-6063 based fly ash composites
using Taguchi. International Journal of Applied Engineering Research, 7(11), 2012.
[56]. Verma, A. S., Kant, S., & Suri, N. M. (2013). Modeling of
Process variables for fly ash based Al-6063 composites
using Artificial Neural Network. International Journal of
Scientific and Research Publications, 3(5), 1-5.
[57]. Verma, A. S., & Suri, N. M. (2015). Corrosion Behavior of
Aluminum Base Particulate Metal Matrix Composites: A
Review. Materials Today: Proceedings, 2(4-5), 2840-2851.
[58]. Yaspal, Jawalkar, C. S., Verma, A. S., & Suri, N. M.
(2017). Fabrication of Aluminium MMC with Particulate
Reinforcement: A Review. Materials Today: Proceedings,
4(2), 2927-2936.
