References
[1]. Abachi, P., Masoudi, A., & Purazrang, K. (2006). Dry
sliding wear behavior of SiC P/QE22 magnesium alloy
matrix composites. Materials Science and Engineering: A,
435, 653-657.
[2]. Al-Qutub, A. M., Khalil, A., Saheb, N., & Hakeem, A. S.
(2013). Wear and friction behavior of Al6061 alloy
reinforced with carbon nanotubes. Wear, 297(1), 752-761.
[3]. Dwivedi, S. P., Kumar, S., & Kumar, A. (2012). Effect of
turning parameters on surface roughness of A356/5% SiC
composite produced by electromagnetic stir casting.
Journal of Mechanical Science and Technology, 26(12),
3973-3979.
[4]. Dwivedi, S. P. (2014). Effect of process parameters on
tensile strength of friction stir welding A356/C355 aluminium
alloys joint. Journal of Mechanical Science and
Technology, 28(1), 285-291.
[5]. Dwivedi, S. P., & Sharma, S. (2014). Effect of process
parameters on tensile strength of 1018 mild steel joints
fabricated by microwave welding. Metallography,
Microstructure, and Analysis, 3(1), 58-69.
[6]. Dwivedi, S. P., Sharma, S., & Mishra, R. K. (2014). Effects
of roller burnishing process parameters on surface
roughness of A356/5% SiC composite using response
surface methodology. Advances in Manufacturing, 2(4),
303-317.
[7]. Dwivedi, S. P., Sharma, S., & Mishra, R. K. (2015).
Microstructure and mechanical behavior of A356/SiC/Flyash
hybrid composites produced by electromagnetic stir
casting. Journal of the Brazilian Society of Mechanical
Sciences and Engineering, 37(1), 57-67.
[8]. Dwivedi, S. P., Sharma, S., & Mishra, R. K. (2016a). A
comparative study of waste eggshells, CaCO , and SiC- 3
reinforced AA2014 green metal matrix composites.
Journal of Composite Materials, 51(17), 2407-2421.
[9]. Dwivedi, S. P., Sharma, S., & Mishra, R. K. (2016b).
Characterization of waste eggshells and CaCO reinforced 3
AA2014 green metal matrix composites: A green
approach in the synthesis of composites. International
Journal of Precision Engineering and Manufacturing,
17(10), 1383-1393.
[10]. Dwivedi, S. P., Sharma, S., & Mishra, R. K. (2016c).
Mechanical and metallurgical characterizations of
AA2014/eggshells waste particulate metal matrix
composite. International Journal of Precision Engineering
and Manufacturing-Green Technology, 3(3), 281-288.
[11]. Dwivedi, S. P., Sharma, S., & Mishra, R. K. (2016d).
Mechanical and metallurgical characterizations of
AA2014/eggshells/SiC hybrid green metal matrix
composite produced at optimum reinforcement
parameters. Proceedings of the Institution of Mechanical
Engineers, Part B: Journal of Engineering Manufacture,
0954405416673100.
[12]. Dwivedi, S. P., Sharma, S., & Mishra, R. K. (2017).
Tribological behavior of a newly developed AA2014/waste
eggshell/SiC hybrid green metal matrix composite at
optimum parameters. Green Processing and Synthesis,
DOI 10.1515/gps-2016-0177
[13]. Krumphals, F., Flitta, I., Mitsche, S., Wlanis, T., Jahn, A.,
& Sommitsch, C. (2008). Comparison of experimental and
Finite Element Modelling of the extrusion of AA6082 on both
tools and extrudate as a function of process parameters.
International Journal of Material Forming, 1, 427-430.
[14]. Lee, J. M., Kang, S. B., & Han, J. (2008). Dry sliding
wear of MAO-coated A356/20 vol.% SiCp composites in the temperature range 25–180 ° C. Wear, 264(1), 75-85.
[15]. Mishra, A. K., Sheokand, R., & Srivastava, R. K. (2012).
Tribological behaviour of Al 6061/SiC metal matrix
composite by Taguchi's Techniques. International Journal
of Scientific and Research Publications, 2(10), 1-8.
[16]. Natarajan, N., Vijayarangan, S., & Rajendran, I.
(2006). Wear behaviour of A356/25SiCp aluminium matrix
composites sliding against automobile friction material.
Wear, 261(7), 812-822.
[17]. Ramachandra, M., & Radhakrishna, K. (2004,
December). Study of abrasive wear behaviour of Al-Si (12%)
SiC Metal matrix composite synthesised using vortex
Method. In International Symposium of Research Students
on Materials Science and Engineering (pp. 20-22).
[18]. Savaskan, T., & Bican, O. (2010). Dry sliding friction
and wear properties of Al–25Zn–3Cu–3Si alloy. Tribology
International, 43(8), 1346-1352.
[19]. Sherstnev, P., Flitta, I., Sommitsch, C., Hacksteiner, M.,
& Ebner, T. (2008). The effect of the initial rolling
temperature on the microstructure evolution during and
after hot rolling of AA6082. International Journal of Material
Forming, 1(1), 395-398.
[20]. Singla, M., Singh, L., & Chawla, V. (2009). Study of
wear properties of Al-SiC composites. Journal of Minerals
and Materials Characterization and Engineering, 8(10),
813-819 .
[21]. Srinivasulu, M., Komaraiah, M., & Rao, C. K. P. (2013).
Prediction of the surface roughness of AA6082 flow-formed
tubes by design of experiments. Journal of Mechanical
Science and Technology, 27(6), 1835-1842.
[22]. Wear. (n.d.). In Wikipedia. Retrieved from
https://en.wikipedia. org/wiki/Wear
