References
[1]. J. Y. Huang, C. Y. Lin, C. Shen, J. Shieh, and B. Dai,
(2012). “Low cost high efficiency amorphous silicon solar
cells with improved light-soaking stability”. Solar Energy
Materials and Solar Cells, Vol.98, pp.277-282.
[2]. C. Hsu, C. Battaglia, C. Pahud, Z. Ruan, F. Haug, S.
Fan, C. Ballif, and Y. Cui, (2012). “High efficiency
amorphous silicon Solar Cell on a Periodic Nanocone
Back Reflector”. Advanced Energy Materials, Vol.2, No.6,
pp.628-633.
[3]. L. K. Wagner and J. C. Grossman, (2008).
“Microscopic description of light induced defects in
amorphous silicon Solar cells”. Physical Review Letters,
Vol.101, No.26, pp.1-5.
[4]. G. Azzouzi and W. Tazibt, (2013). “Improving silicon
solar cell efficiency by using the impurity photovoltaic
effect”. Energy Procedia, Vol.41, pp.40-49.
[5]. T. Komaru, H. Sato, W. Futako, T. Kamiya, C.M.
Fortmann, and I. Shimizu, (2001). “Improved p–i–n solar
cells structure for narrow bandgap a-Si: H prepared by Ar*
chemical annealing at high temperatures”. Solar Energy
Materials and Solar Cells, Vol.66, No.1-4, pp.329-335.
[6]. W.F. Mohammad, (2003). “Calculations of light
trapping, responsivity, and internal quantum efficiency of
In-doped silicon (n) structure”. Renewable Energy, Vol.28,
No.2, pp.311-320.
[7]. Q. H. Fan, C. Chen, Xi. Liao, Xi. Xiang, S. Zhang, W.
Ingler, N. Adiga, Z. Hu, X. Cao, W. Du, and X. Deng,
(2010). “High efficiency silicon–germanium thin film solar
cells using graded absorber layer”. Solar Energy Materials
and Solar Cells, Vol.94, No.7, pp.1300-1302.
[8]. W.F. Mohammad and M. K. Jarjes, (2000).
“Photoelectrical properties of silicon germanium thin
films”. Mu’tah Lil-Buhuth Wad-Dirasat, Vol.15, No.4,
pp.143-154.
[9]. M. Y. Valakh, V. M. Dzhagan, V. O. Yukhymchuk, O. V.
Vakulenko, S. V. Kondratenko, and A. S. Nikolenko, (2007).
“Optical and photoelectrical properties of GeSi
nanoislands”. Semiconductor Science and Technology,
Vol.22, No.4, pp.326-330.
[10]. R. A. Street, (2000). Technology and Applications of
Amorphous Silicon. Springer- Verlag, Berlin, Heidelberg.
[11]. N. Motta, F. Rosei, A. Sgarlata, G. Capellini, S.
Mobilio, and F. Boscherini, (2002). “Evolution of the
intermixing process in Ge/Si (111) self-assembled islands”.
Materials Science and Engineering, Vol.88, No.2-3,
pp.264-268.
[12]. H. Li, Z. Wu and M. T. Lusk, (2014). “Dangling bond
defects: The critical roadblock to efficient photo
conversion in hybrid quantum dot solar cells”. J. Phys.
Chem. C, Vol.118, No.1, pp.46-53.
[13]. W. Mohammad and M. K. Jarjes, (1995). “Electrical
characteristics of a Si1-xGex alloy thin films”. Al-Rafidian
Eng. J., Mosul University, Mosul, Iraq, Vol.3, No.2, pp.1-7.
[14]. H. J. Herzog, L. Csepregi, and H. Seidel, (1984). “XRay
investigation of boron and germanium doped silicon
epitaxial layers”. J. Electrochem. Soc., Vol.131, No.12,
pp.2969-2974.
[15]. American Standards for Testing of Materials (ASTM).
Retrieved from www.astm.org
[16]. V. Vavrunkova, M. Netrvalova, L. Prusakova, J.
Mullerova, and P. Sutta, (2010). “Study of re-crystallization
th processes in amorphous silicon films”. 27 International
Conference on Microelectronics, IEEE, Microelectronics
Proceedings (MIEL), pp.257-260.
[17]. M. H. Cohen, H. Fritzsche, and S. R. Ovshinisky,
(1991). “ Simple band model for amorphous
semiconductor alloys”. Phys. Rev. Lett., Vol.22, No.20,
pp.1065-1068.
[18]. N. Wyrsch, F. Finger, T.J. McMahon, and M. Vanecek,
(1991). “How to reach more precise interpretation of sub
gap absorption spectra in terms of deep defect density in
a-Si:H”. Journal of Non-Crystalline Solids, Vol.137-138, pp.347-350.
