A Study on the Residual Stresses in Resistance Spot Welding

Yasser Rihan*, S. Ayyad**, M.I. Elamy***
* Atomic Energy Authority, Hot Lab. Centre, Anshas, Egypt.
**-*** Menoufia University, Faculty of Engineering, Production Engineering & Mechanical Design Department, Egypt.
Periodicity:July - September'2015
DOI : https://doi.org/10.26634/jms.3.2.3504

Abstract

Spot-welded joints are widely used in industries. A simplified structural model is proposed in this paper to study the residual stresses in spot-welded joints. The current paper describes the influence of the weld parameters on the residual stresses of resistance spot welds on 304 type stainless steel sheets. Various loading conditions and joint parameters are considered. It is found that the increase of both weld current and weld time decreases the residual stresses, and the increase of electrode force decreases the residual stresses. The nugget diameter increases continuously with weld current.

Keywords

Residual Stress, Spot Welding, Simulation.

How to Cite this Article?

Rihan, Y., Ayyad, S., and Elamy, M. I. (2015). A Study on the Residual Stresses in Resistance Spot Welding. i-manager’s Journal on Material Science, 3(2), 28-32. https://doi.org/10.26634/jms.3.2.3504

References

[1]. Santos, I.O., Zhang, W., Gonçalves, V.M., Bay, N., Martins, P.A.F. (2004). “Weld bonding of stainless steel”, Int. J. Mach. Tool Manuf., Vol. 44, pp. 1431–1439.
[2]. Zhang, Y., Taylor, D. (2001). “Optimization of spotwelded structures”, Finite Elements Anal. Des., Vol. 37, No. 12, pp. 1013–1022.
[3]. Kahraman N. (2007). “The influence of welding parameters on the joint strength of resistance spot-welded titanium sheets”, J. Mater Design, Vol. 28, pp. 420–426.
[4]. Feulvarch, E., Robin, V., Bergheau, J.M. (2004). “Resistance spot welding simulation: a general finite element formulation of electrothermal contact conditions”, J. Mater Process Technol, Vol. 153-154, pp. 436–441.
[5]. Thornton, P.H., Krause, A.R., Davies, R.G. (1996). “The aluminum spot weld”, Weld. J., Vol. 75, pp. 101s-108s.
[6]. Wan, X., Wang, Y., Zhang, P. (2014). “Modeling the effect of welding current on resistance spot welding of DP600 steel”, Journal of Materials Processing Technology, Vol. 214, pp. 2723–2729.
[7]. Martín, Ó., Pereda, M., Santos, J.I., Galán, J. (2014). “Assessment of resistance spot welding quality based on ultrasonic testing and tree-based techniques”, Journal of Materials Processing Technology, Vol. 214, pp. 2478–2487.
[8]. Zhao, D., Wang, Y., Lin, Z., Sheng, S. (2013). “An effective quality assessment method for small scale resistance spot welding based on process parameters”, NDT&E International, Vol. 55, pp. 36–41.
[9]. Alizadeh-Sh, M., Marashi, S.P, Pouranvari, M. (2014). “Resistance spot welding of AISI 430 ferritic stainless steel: Phase transformations and mechanical properties”, Materials and Design, Vol. 56, pp. 258–263.
[10]. Pereira, A.M., Ferreira, J.M., Antunes, F.V., Bártolo, P.J. (2009). “Effect of process parameters on the strength of resistance spot welds in 6082-T6 aluminium alloy”, J. Mater Design, Vol. 31, No. 5, pp. 2454-2463.
[11]. Zhang, J., Dong, P., Brust, F. (1999). “Residual stress analysis and fracture assessment of weld joints in moment frames, ASME PVP- Fracture”, Fatigue and Weld Residual Stress, Vol. 393, pp. 201-207.
[12]. Preston, R., Smith, S., Shercliff, H., Withers, P. (1999). “An investigation into the residual stresses in an aluminum 2024 Test Weld”, ASME PVP- Fracture, Fatigue and Weld Residual Stress, Vol. 393, pp. 265-277.
[13]. Ranjbar, N., Serajzadeh, S., Kokabi, A.H. (2008). “Simulation of welding residual stresses in resistance spot welding, FE modeling and X-ray verification”, J. Mater Process Technol., Vol. 205, pp. 60-69.
[14]. Tsai, C.L., Jammel, O.A., Papritan, J.C., Dickinson, D.W. (1992). “Modeling of resistance spot weld nugget growth”, Weld. J., Vol. 70, pp. 47s-45s.
[15]. Na, S.J., Park, S.W. (1996). “A theoretical study on electrical and thermal response in resistance spot welding”, Weld. J., Vol. 75, pp. 233s-241s.
[16]. Sun, X., Dong, P. (2000). “Analysis of aluminum resistance spot welding process using coupled finite element procedures”, Weld. J., Vol. 79, pp. 215s-221s.
[17]. Long, X., Khanna, S.K. (2003). “Numerical simulation of residual stress in spot welded joints”, Trans. ASME, Vol. 125, pp. 222-226.
[18]. Talijiat, B., Radhakrishnan, B., Zacharia, T. (1998). “Numerical analysis of GTA welding process with emphasis on spot-solidification phase transformation effects on residual stress”, Mater Sci. Eng. A, Vol. 246, pp. 45-54.
[19]. Cha, B.W., Na, S.J. (2003). “A study on the relationship between welding conditions and residual stress of resistance spot welded 304-type stainless steels”, J. Manufacturing Systems, Vol. 22, pp. 181-189.
[20]. Deng, D. (2009). “FEM prediction of welding residual stress and distortion in carbon steel considering phase transformation effects”, J. Mater Design, Vol. 30, pp. 359- 366.
[21]. Kou, S. (2003). “Welding metallurgy”, John Wiley & Sons, New Jersey.
[22]. Pouranvari, M., Asgari, H.R., Mosavizadeh, S.M., Marashi, P.H., Goodarzi, M. (2007). “Effect of weld nugget size on overload failure mode of resistance spot welds”, Sci Technol. Weld Join, Vol. 12, pp. 217–225.
If you have access to this article please login to view the article or kindly login to purchase the article

Purchase Instant Access

Single Article

North Americas,UK,
Middle East,Europe
India Rest of world
USD EUR INR USD-ROW
Pdf 35 35 200 20
Online 35 35 200 15
Pdf & Online 35 35 400 25

Options for accessing this content:
  • If you would like institutional access to this content, please recommend the title to your librarian.
    Library Recommendation Form
  • If you already have i-manager's user account: Login above and proceed to purchase the article.
  • New Users: Please register, then proceed to purchase the article.