Design of Double U-Slot Microstrip Patch Antenna

Rachna Prabha*
Department of Electronics and Communication Engineering, Madan Mohan Malaviya University of Technology, Gorakhpur, Uttar Pradesh, India.
Periodicity:July - December'2020
DOI : https://doi.org/10.26634/jcs.9.2.17798

Abstract

In the presented paper, the printed patch antenna is used for the various applications in the wireless communication systems. Printed patch antenna has several negatives for the use of microwave frequency as low efficiency, low gain and low bandwidth. The parameters of this antenna are very complex in tuning. Due to this, various slots is used for improvement of antenna performance. The variety of slots is used in microstrip patch antenna for the high frequency applications which makes the antenna suitable for the wireless communication systems. This paper provides a double U-slot and a defected ground structure for the improvement of bandwidth, gain and various other parameters.

Keywords

Dual Band, DGS, Printed Antenna, U-slot, Bandwidth, Gain.

How to Cite this Article?

Prabha, R. (2020). Design of Double U-Slot Microstrip Patch Antenna. i-manager's Journal on Communication Engineering and Systems, 9(2), 9-13. https://doi.org/10.26634/jcs.9.2.17798

References

[1]. Balani, C. A. (2005). Antenna theory analysis & design (3rd Ed.). Wiley Interscience.
[2]. Brar, G. S., Singh, J., & Sidhu, E. (2016). High gain rectangular microstrip patch antenna employing FR4 substrate for Wi-MAX, LMDS and MMDS applications. International Journal of Engineering Research and Applications, 6, 49-51.
[3]. Cao, Y. F., Cheung, S. W., & Yuk, T. I. (2015). A multiband slot antenna for GPS/WiMAX/WLAN systems. IEEE Transactions on Antennas and Propagation, 63(3), 952- 958. https://doi.org/10.1109/TAP.2015.2389219
[4]. Colburn, J. S., & Rahmat-Samii, Y. (1999). Patch antennas on externally perforated high dielectric constant substrates. IEEE Transactions on Antennas and Propagation, 47(12), 1785-1794. https://doi.org/10.1109/ 8.817654
[5]. Ha, S. J., & Jung, C. W. (2011). Reconfigurable beam steering using a microstrip patch antenna with a U-slot for wearable fabric applications. IEEE Antennas and Wireless Propagation Letters, 10, 1228-1231. https://doi.org/10.110 9/LAWP.2011.2174022
[6]. Kumar, C., & Guha, D. (2011). Nature of cross-polarized radiations from probe-fed circular microstrip antennas and their suppression using different geometries of defected ground structure (DGS). IEEE Transactions on Antennas and Propagation, 60(1), 92-101. https://doi.org/10.1109/TAP. 2011.2167921
[7]. Li, B., Hong, J., & Wang, B. (2012). Switched bandnotched UWB/dual-band WLAN slot antenna with inverted S-shaped slots. IEEE Antennas and Wireless Propagation Letters, 11, 572-575. https://doi.org/10.1109/LAWP.2012.22 00228
[8]. Liu, W. C., Wu, C. M., & Dai, Y. (2011). Design of triplefrequency microstrip-fed monopole antenna using defected ground structure. IEEE Transactions on Antennas and Propagation, 59(7), 2457-2463. https://doi.org/10.1 109/TAP.2011.2152315
[9]. Moosazadeh, M., & Kharkovsky, S. (2014). Compact and small planar monopole antenna with symmetrical Land U-shaped slots for WLAN/WiMAX applications. IEEE Antennas and Wireless Propagation Letters, 13, 388-391. https://doi.org/10.1109/LAWP.2014.2306962
[10]. Qin, P. Y., Weily, A. R., Guo, Y. J., & Liang, C. H. (2010). Polarization reconfigurable U-slot patch antenna. IEEE Transactions on Antennas and Propagation, 58(10), 3383- 3388. https://doi.org/10.1109/TAP.2010.2055808
[11]. Shimu, N. J., & Ahmed, A. (2016, May). Design and performance analysis of rectangular microstrip patch antenna at 2.45 GHz. In 2016, 5th International Conference on Informatics, Electronics and Vision (ICIEV) (pp. 1062- 1066). IEEE. https://doi.org/10.1109/ICIEV.2016.7760161
[12]. Sran, S. S., & Sivia, J. S. (2015). Rectangular microstrip patch antenna with triangular slot. International Journal of Computer Applications, 975, 27-29.
[13]. Yadav, A., & Pahwa, K. (2014). Design & parametric study of rectangular slot microstrip patch antenna for UWB applications. International Journal of Electrical and Electronics Engineering (IJEEE), 1(3), 4-8.
[14]. Yun, S., Kim, D. Y., & Nam, S. (2012). Bandwidth and efficiency enhancement of cavity-backed slot antenna using a substrate removal. IEEE Antennas and Wireless Propagation Letters, 11, 1458-1461. https://doi.org/10.110 9/LAWP.2012.2230392
If you have access to this article please login to view the article or kindly login to purchase the article

Purchase Instant Access

Single Article

North Americas,UK,
Middle East,Europe
India Rest of world
USD EUR INR USD-ROW
Pdf 35 35 200 20
Online 35 35 200 15
Pdf & Online 35 35 400 25

Options for accessing this content:
  • If you would like institutional access to this content, please recommend the title to your librarian.
    Library Recommendation Form
  • If you already have i-manager's user account: Login above and proceed to purchase the article.
  • New Users: Please register, then proceed to purchase the article.