Experimental Investigation on Flexural Members using Basalt Rebars and HYSD Bars as Concrete Reinforcement

P. Jagadeesan *, Peddireddy Shreeja Reddy **, Ragi Maniteja ***, Voruganti Sai Teja ****, Challa Datta Karthik*****
*_**** Department of Civil Engineering, Guru Nanak Institutions, Technical Campus (Autonomous), Hyderabad, Telangana, India.
***** Department of Civil Engineering, St. Martin's Engineering College, Hyderabad, Telangana, India.
Periodicity:September - November'2020
DOI : https://doi.org/10.26634/jste.9.3.17680

Abstract

MEMBERS USING BASALT REBARS AND HYSD BARS AS CONCRETE REINFORCEMENT By ABSTRACT Basalt rocks are essentially an igneous class of naturally occurring mafic extrusive rock. When basalt rock is heated to a molten stage and formed into fibres, it is mixed with epoxy resins and moulded to form basalt rebars. Today, basalt rebars are a part of emerging technology, where their tensile strength is observed around 800-1350 MPa. This study primarily focuses on integrating these basalt rebars into the concrete as a reinforcing material in flexural members and analyzing their behavior in theoretical and functional study relative to conventional HYSD reinforcement. In this study, 2 sets of concrete beam specimens of M25 design mix concrete have been prepared each of size 700 x 150 x 150 mm. One set is made of HYSD reinforcement and the other with basalt rebars, and are subjected to flexure testing, after immersion curing process for 28 days. The various characteristics including maximum load carrying capacities, deflection, flexural strength and first crack point have been observed. Finally, the viability and adaptability for basalt as reinforcement is understood after the test results, in comparison with theoretical analysis.

Keywords

Basalt Rebars, Basalt Reinforced Beams, First Crack, Flexural Strength, HYSD Bars, Immersion Curing, M25 Design Mix, Conventionally Reinforced Beams, Deflection, Failure Mechanism.

How to Cite this Article?

Jagadeesan, P., Reddy, P. S., Maniteja, R., Teja, V. S., and Karthik, C. D. (2020). Experimental Investigation on Flexural Members using Basalt Rebars and HYSD Bars as Concrete Reinforcement. i-manager's Journal on Structural Engineering, 9(3), 37-60. https://doi.org/10.26634/jste.9.3.17680

References

[1]. Abed, F., & Alhafiz, A. R. (2019). Effect of basalt fibers on the flexural behavior of concrete beams reinforced with BFRP bars. Composite Structures, 215, 23-34. https://doi. org/10.1016/j.compstruct.2019.02.050
[2]. Abramento, M., Viana, P. M. F., & Palmeira, E. M. (2010). Geomembrane - Fresh concrete interface friction from ramp equipment and field tests. In 9th International Conference on Geosynthetics (Vol.2, pp.657-660).
[3]. Atutis, M., Valivonis, J., & Atutis, E. (2018). Experimental study of concrete beams prestressed with basalt fiber reinforced polymers. Part I: Flexural behavior and serviceability. Composite Structures, 183, 114-123. https:// doi.org/10.1016/j.compstruct.2017.01.081
[4]. Babu, M. R. D. (2016). Design and detailing of RC elements (1st ed.). Falcon Publishers
[5]. Bansal, R. K. (2011). Strength of materials (Mechanics of solids) (6th ed.). Lakshmi Publications. Retrieved from https://www.kopykitab.com/A-Textbook-Of-Strength-Of- Materials-Mechanics-Of-Solids-6th-Edition-by-R-K-Bansal
[6]. Bhavikatti, S. S. (2010). Basic civil engineering. New Age International (P) Limited. Retrieved from https://www.acad emia.edu/33128048/Basic_Civil_Engineering_by_S_S_Bha vikatti_civilenggforall
[7]. Bureau of Indian Standard. (1959). Indian standard Methods of tests for strength of concrete (IS: 516). Bureau of Indian Standards, New Delhi.
[8]. Bureau of Indian Standard. (1963) Indian Standard Methods of testing for aggregate for Concrete (IS: 2386). Bureau of Indian Standards, New Delhi.
[9]. Bureau of Indian Standard. (1978). Indian Standard Design Aids for Reinforced Concrete - Code of practice (IS: 456). Bureau of Indian Standards, New Delhi.
[10]. Bureau of Indian Standard. (1991). Indian Standard Specification for Standard Sand for Testing of Cement (IS: 650). Bureau of Indian Standards, New Delhi.
[11]. Bureau of Indian Standard. (1998). Indian Standard Methods of Tests Conducted On Cement (IS: 4031). Bureau of Indian Standards, New Delhi.
[12]. Bureau of Indian Standard. (2000). Indian Standard Plain and Reinforced Concrete - Code of practice (IS: 456). Bureau of Indian Standards, New Delhi. Retrieved from https://elibrarywcl.files.wordpress.com/2015/02/plain-andreinforced- concrete.pdf
[13]. Bureau of Indian Standard. (2012). Indian Standard Recommended Guidelines for Concrete Mix Design- Code of practice (IS: 10262). Bureau of Indian Standards, New Delhi.
[14]. Bureau of Indian Standard. (2013). Indian Standard Ordinary Portland Cement, 53 Grade Specification (First Revision)-Code of practice (IS: 12269). Bureau of Indian Standards, New Delhi. Retrieved from https://www.iitk.ac.in/ ce/test/IS-codes/is.12269.2013.pdf
[15]. Bureau of Indian Standard. (2016). Indian Standard Specification for Coarse and Fine Aggregates from Natural Sources for Concrete - Code of practice (IS: 383). Bureau of Indian Standards, New Delhi.
[16]. Chimeremeze, C. P., Timur, S. I., & Vladimir, J. P. (2019). analysis of a shallow shell with the use of metal and basalt reinforcement. International Journal of Advances in Mechanical and Civil Engineering, 6(2), 40-44.
[17]. Destro, R., Boscato, G., Mazzali, U., Russo, S., Peron, F., & Romagnoni, P. (2015). Structural and thermal behaviour of a timber-concrete prefabricated composite wall system. Energy Procedia, 78, 2730-2735. https://doi.org/ 10.1016/j.egypro.2015.11.614
[18]. Duggal, S. K. (2017). Building materials. Routledge. Retrieved from https://www.routledge.com/Building- Materials/Duggal/p/book/9789054107644
[19]. Duic, J., Kenno, S., & Das, S. (2018). Performance of concrete beams reinforced with basalt fibre composite rebar. Construction and Building Materials, 176, 470-481. https://doi.org/10.1016/j.conbuildmat.2018.04.208
[20]. Elgabbas, F., Vincent, P., Ahmed, E. A., & Benmokrane, B. (2016). Experimental testing of basaltfiber- reinforced polymer bars in concrete beams. Composites Part B: Engineering, 91, 205-218. https:// doi.org/10.1016/j.compositesb.2016.01.045
[21]. El-Gelani, A. M., High, C. M., Rizkalla, S. H., & Abdalla, E. A. (2018). Effects of basalt fibres on mechanical properties of concrete. In MATEC Web of Conferences (Vol. 149, p. 01028). https://doi.org/10.1051/matecconf/2018 14901028
[22]. Fard, S. G., & Zeighami, E. (2019). Hybrid fiber concrete reinforced with steel fibers and pozzolanic materials. i-manager's Journal on Structural Engineering, 8(4), 1-9. https://doi.org/10.26634/jste.8.4.16692
[23]. Faye, P. N., Ye, Y., & Diao, B. (2017). Bond effects between concrete and steel bar using different diameter bars and different initial crack width. Advances in Civil Engineering. https://doi.org/10.1155/2017/8205081
[24]. Gu, L., & Meng, X. H. (2016). Review on research and application of stainless steel reinforced concrete. In MATEC Web of Conferences (Vol. 63, p. 03003). https://doi.org/ 10.1051/matecconf/20166303003
[25]. Hegger, J., & Voss, S. (2008). Investigations on the bearing behaviour and application potential of textile reinforced concrete. Engineering Structures, 30(7), 2050- 2056. https://doi.org/10.1016/j.engstruct.2008.01.006
[26]. Henry, R., Brooke, N., & Ingham, J. (2007). An Overview of Reinforced and Prestressed Concrete Research at The University of Auckland. In ANCER Annual Meeting Proceedings: Earthquake Engineering Research: From strong seismic regions to regions of moderate seismicity.
[27]. Inman, M., Thorhallsson, E. R., & Azrague, K. (2017). A mechanical and environmental assessment and comparison of basalt fibre reinforced polymer (BFRP) rebar and steel rebar in concrete beams. Energy Procedia, 111, 31-40. https://doi.org/10.1016/j.egypro.2017.03.005
[28]. Joshi, V., & Rao, P. S. (2012). Impact strength of steel fibre reinforced high strength self compacting concrete. imanager's Journal on Civil Engineering, 2(3), 7-13. https:// doi.org/10.26634/jce.2.3.1931
[29]. Kandasamy, R., & Murugesan, R. (2011). Fibre reinforced concrete using domestic waste plastics as fibres. ARPN Journal of Engineering and Applied Sciences, 6(3), 75-82.
[30]. Karthik, C. D., Ruthvik, G., & Vignan, G. S. (2020). Study on the influence of the methods of curing on the strength properties of concrete. i-manager's Journal on Structural Engineering, 9(1), 10-16. https://doi.org/10.2663 4/jste.9.1.17006
[31]. Khurmi, R. S., & Khurmi, N. (2018). Engineering Mechanics. S. Chand Publications. Retrieved from https:// www.schandpublishing.com/books/tech-professional/ mechanical-engineering/a-textbook-engineering-me chanics/9789352833962/#.X9x7sFUzbIU
[32]. Kumar, M. M., Reddy, V. S., Rao, M. V. S., & Shrihari, S. (2019). Flexural capacity of concrete beams reinforced with Basalt fibre rebars. International Journal of Engineering and Advanced Technology (IJEAT), 9(1), 26-30.
[33]. Lapko, A., & Urbański, M. (2015). Experimental and theoretical analysis of deflections of concrete beams reinforced with basalt rebar. Archives of Civil and Mechanical Engineering, 15(1), 223-230. https://doi.org/ 10.1016/j.acme.2014.03.008
[34]. Lokesh, S., Dharshini, R. G., & Suresh, G. (2015). Experimental comparative study on basalt and steel reinforcement in RC beam. Journal of Civil Engineering and Environmental Technology, 2(7), 626-629.
[35]. Monaldo, E., Nerilli, F., & Vairo, G. (2019). Basalt-based fiber-reinforced materials and structural applications in civil engineering. Composite Structures, 214, 246-263. https:// doi.org/10.1016/j.compstruct.2019.02.002
[36]. Pawłowski, D., & Szumigała, M. (2015). Flexural behaviour of full-scale basalt FRP RC beams–experimental and numerical studies. Procedia Engineering, 108, 518- 525. https://doi.org/10.1016/j.proeng.2015.06.114
[37]. Prahallada, M. C., & Prakash, K. B. (2013). Behaviour of waste plastic fibre reinforced concrete produced by conventional aggregates and recycled aggregates under alkaline environment - An experimental investigation. imanager's Journal on Structural Engineering, 2(1), 27-31. https://doi.org/10.26634/jste.2.1.2267
[38]. Rahman, A. F., Goh, W. I., Mohamad, N., Kamarudin, M. S., & Jhatial, A. A. (2019). Numerical analysis and experimental validation of reinforced foamed concrete beam containing partial cement replacement. Case Studies in Construction Materials, 11, e00297. https://doi. org/10.1016/j.cscm.2019.e00297
[39]. Raju, N. K., & Pranesh, R. N. (2003). Reinforce Concrete Design: IS: 456-2000: Principles and Practice. New Age International.
[40]. Rao, K. J., Vasam, S., & Rao, M. V. S. (2018). Bond strength of HYSD bars and SCC with and without recycled aggregate-An experimental study. IOP Conference Series: Materials Science and Engineering 431(2018), 102007. https://doi.org/10.1088/1757-899X/431/10/102007
[41]. Rao, P. S., Mouli, K. C., & Sekhar, T. S. (2008). Durability studies on glass fibre reinforced concrete. i-manager's Journal on Future Engineering and Technology, 4(2), 71-76. https://doi.org/10.26634/jfet.4.2.527
[42]. Rao, P. S., Rahim, Z. A., & Sekhar, T. S. (2012). Durability of steel fibre reinforced high strength metakaolin blended concrete. i-manager's Journal on Civil Engineering, 2(3), 28-32. https://doi.org/10.26634 /jce.2.3.1933
[43]. Reddy, L. S., Rao, N. R., & Rao, T. G. (2010). Finite element analysis of high strength concrete beams with and without web reinforcement. i-manager's Journal on Civil Engineering, 1(1), 26-33. https://doi.org/10.26634/jce.1.1. 1355
[44]. Ruthvik, G., Karthik, C. D., & Vignan, G. S. (2020). A study on the strength parameters of concrete with polypropylene fibres as a reinforcing material. i-manager's Journal on Structural Engineering, 9(2), 18-25. https://doi. org/10.26634/jste.9.2.17007
[45]. Seis, M., & Beycioğlu, A. (2017). Bond performance of basalt fiber-reinforced polymer bars in conventional Portland cement concrete: A relative comparison with steel rebar using the hinged beam approach. Science and Engineering of Composite Materials, 24(6), 909-918. https://doi.org/10.1515/secm-2015-0210
[46]. Shetty, M. S. (2005). Concrete Technology Theory and Practise (6th ed.). New Delhi, India: S. Chand & Co.
[47]. Sutharsan, R., Ramprasanna, S. R., Gnanappa, S. B., & Ganesh, A. C. (2020, January). Experimental study on Bamboo as a reinforcing material in concrete. In AIP Conference Proceedings (Vol. 2204, No. 1, p. 020024). AIP Publishing LLC. https://doi.org/10.1063/1.5141561
[48]. Syal, I. C., & Goel, A. K. (2008). Reinforced Concrete Structures. S. Chand Limited. Retrieved from https://books. google.co.in/books/about/Reinforced_Concrete_Structur es.html?id=95jawAEACAAJ&redir_esc=y
[49]. Tharani, K., Mahendran, N., & Vijay, T. J. (2019). Experimental investigation of geogrid reinforced concrete. Slab International Journal of Engineering and Advanced Technology, 8(3S), 158-163.
[50]. Urbanski, M., Lapko, A., & Garbacz, A. (2013). Investigation on concrete beams reinforced with basalt rebars as an effective alternative of conventional R/C structures. Procedia Engineering, 57, 1183-1191. https:// doi.org/10.1016/j.proeng.2013.04.149
[51]. Vignan, G. S., Ruthvik, G., & Karthik, C. D. (2020). Study on mechanical properties of textile reinforced concrete. i-manager's Journal on Structural Engineering, 9(2), 25-36. https://doi.org/10.26634/jste.9.2.17256
If you have access to this article please login to view the article or kindly login to purchase the article

Purchase Instant Access

Single Article

North Americas,UK,
Middle East,Europe
India Rest of world
USD EUR INR USD-ROW
Pdf 35 35 200 20
Online 35 35 200 15
Pdf & Online 35 35 400 25

Options for accessing this content:
  • If you would like institutional access to this content, please recommend the title to your librarian.
    Library Recommendation Form
  • If you already have i-manager's user account: Login above and proceed to purchase the article.
  • New Users: Please register, then proceed to purchase the article.