i-manager Publications

A Study on Tribological Behaviour of Nanocoated Piston Ring

Ravindra M. Kanase*

Department of Automobile Engineering, Padmashri Dr. VitthalraoVikhe Patil, Institute of Technology & Engineering(Polytechnic) Pravaranagar, Loni, Ahmednagar, Maharashtra, India.

Periodicity:May - July'2019
DOI : https://doi.org/10.26634/jme.9.3.15913

Abstract

The nanopartical material coating can help to improve performance and life of internal combution automobile engines by reducing the frictional wear and friction between IC engine components. In this research study, tribological properties of titanium dioxide (TiO₂) nanocoatings for piston ring application are investigated. Nanocoating samples were prepared by sol-gel process of varying dipping and drying process cycles (40, 50, 60 and 70). In this research study, frictional wear has been carried out on Pin on Disc Tribometer and the tests were taken by varying load and speed. The obtained results shows that TiO₂ Nanocoating exhibits good friction reduction and anti-wear properties and also decreased the coefficient of friction by 4% and 8% at 60 and 70 dipping-drying process cycles respectively, as compared with conventional chromium plated jobs. Also the micrographs of worn surfaces were analyzed by using Scanning Electron Microscopy (SEM).

Keywords

TiO² Nanocoating, Tribological Properties, Friction Coefficient

How to Cite this Article?

Kanase, R. M. (2019). A Study on Tribological Behaviour of Nanocoated Piston Ring. i-manager’s Journal on Mechanical Engineering, 9(3), 19-25. https://doi.org/10.26634/jme.9.3.15913

References

[1]. Adamkiewicz, A., & Drzewieniecki, J. (2012). Operational evaluation of piston ring wear in large marine diesel engines. Journal of Polish CIMAC, 7(1), 9-17.

[2]. Asthana, R., Kumar, A., & Dahotre, N. B. (2006). Nanomaterials and nanomanufacturing. Material processing and Manufacturing Science, 551-614. https://doi.org/10.1016/B978-075067716-5/50010-8

[3]. Dahotre, N. B., & Nayak, S. (2005). Nanocoatings for engine application. Surface and Coatings Technology, 194(1), 58-67. https://doi.org/10.1016/j.surfcoat.2004. 05.006

[4]. Holmberg, K., Ronkainen, H., Laukkanen, A., & Wallin, K. (2007). Friction and wear of coated surfaces—scales, modelling and simulation of tribomechanisms. Surface and Coatings Technology, 202(4-7), 1034-1049. https://doi.org/10.1016/j.surfcoat.2007.07.105

[5]. Jeong, D. H., Gonzalez, F., Palumbo, G., Aust, K. T., & Erb, U. (2001). The effect of grain size on the wear properties of electrodeposited nanocrystalline nickel coatings. Scripta Materialia, 3(44), 493-499. https://doi.org/10.1016/ S1359-6462(00)00625-4

[6]. Josephson, M., & Laesson, A. H. (2005). Nanostructured WC-Co coating. Retrieved from http://mixtra.se/nano/ PRES-NANO.pdf

[7]. Li, J. Z. (2013). Computational simulation and prototype testing of nanocoating on products in aerospace industry. In Advanced Materials Research (Vol. 750, pp. 2088-2091). Trans Tech Publications. https://doi.org/10.4028/www. scientific.net/AMR.750- 752.2088

[8]. Prabhu, S., & Vinayagam, B. K. (2009). Nanocoating for engine application. International Journal of Nanotechnology and Applications, 3(1),17-28.

[9]. Priyan, M. S., & Hariharan, P. (2012). The study on tribology and surface interface characterization of FE based alloy coating deposited by HVOF method. Procedia Engineering, 38, 3741-3756. https://doi.org/10.1016/ j.proeng.2012.06.430

[10]. Truhan, J. J., Qu, J., & Blau, P. J. (2005). A rig test to measure friction and wear of heavy duty diesel engine piston rings and cylinder liners using realistic lubricants. Tribology International, 38(3), 211-218. https://doi.org/ 10.1016/j.proeng.2012.06.430

[11]. Tung, S. C., & McMillan, M. L. (2004). Automotive tribology overview of current advances and challenges for the future. Tribology International, 37(7), 517-536. https://doi.org/10.1016/j.triboint.2004.01.013

A Study on Tribological Behaviour of Nanocoated Piston Ring

Abstract

Keywords

How to Cite this Article?

References

If you have access to this article please login to view the article or kindly login to purchase the article

Purchase Instant Access

Options for accessing this content:

	North Americas,UK, Middle East,Europe		India	Rest of world
	USD	EUR	INR	USD-ROW
Pdf	35	35	200	20
Online	35	35	200	15
Pdf & Online	35	35	400	25