References
[1]. K. Kalaivani, V. Anjalipriya, and P. Surendar, (2012).
“Monitoring and control of grain storage using PLC”. Int. J.
Res. Eng. Technol., Vol. 1, No. 3, pp. 282-288.
[2]. S. Naik, J. Dias, J. D. Costa, J. Martin, and B. D. Costa,
(2015). “Optimized preparations of chemical mixtures
using PLC and SCADA”. Int. J. Electr. Electron. Res., Vol. 3,
No. 2, pp. 242-246.
[3]. M. Trivedi, V. Sheoran, and D. Tailor, (2014). “An analysis
and control of a closed loop conveyor system using PLC
and sensors”. Int. J. Innov. Emerg. Res. Eng., Vol. 1, pp. 1-6.
[4]. G. B. Shinde, V. P. Ghadage, A. A. Gadhave, and D. K.
Shedge, (2015). “PLC based auto weighing control
system”. Int. J. Eng. Tech. Res., Vol. 3, No. 3, pp. 213-216.
[5]. P. Dheeraj, and S. R. Suralkar, (2014). “Automatic
multivariate liquid filling system and conveyor control usingPLC and SCADA”. Int. J. Emerg. Technol. Adv. Eng., Vol. 4,
No. 12, pp. 362-365.
[6]. A. A. Algitta, S. Mustafa, F. Ibrahim, N. Abdalruaf, and
M. Yousef, (2015). “Automatic packing machine using
PLC”. Int. J. Innov. Sci. Eng. Technol., Vol. 2, No. 5, pp. 282-
288.
[7]. S. P. Jain, and S. L. Haridas, (2014). “Energy efficient
automized bottling plant using PLC and SCADA with speed
variable conveyor assembly”. J. Electron. Comm. Eng.,
Vol. 9, No. 1, pp. 9-14.
[8]. S. Abdelhedi, K. Taouil, and B. Hadjkacem, (2012).
“Design of automatic vision based inspection system for
monitoring in an olive oil bottling line”. Int. J. Comput. App.,
Vol. 51, No. 21, pp. 39-46.
[9]. K. P. Singh, and P. Singh, (2014). “Design of automated
sorting of object rejection and counting machine”. Int. J.
Emerg. Trends Eng. Dev., Vol. 3, No. 4, pp. 252-264.
[10]. A. T. Sharnagat, and P. V. Thakare, (2015). “Review on
PLC SCADA based industrial conveyor belt for fault
detection and energy saving”. Int. J. Adv. Found. Res. Sci.
Eng., Vol. 1, No. 9, pp. 19-22.
[11]. G. Sujatha, and V. Perasiriyan, (2014). “Conveyor
control and sorting module controlled by programmable
logic controller ”. International Journal of Applied
Engineering and Technology, Vol. 4, No. 2, pp. 12-18.
[12]. M. Kanmani, J. Nivedha, and G. Sundar, (2014). “Belt
Conveyor Monitoring and Fault Detecting using PLC and
SCADA”. International Journal of Advanced Research in
Electrical, Electronics and Instrumentation Engineering,
Vol. 3, No. 4, pp. 243-248.
[13]. Shashank Lingappa M, Vijayavithal Bongale, and
Sreerajendra, (2014). “PLC Controlled Low Cost Automatic
Packing Machine”. International Journal of Advanced
Mechanical Engineering, Vol.4, No.7, pp. 803-811.
[14]. Sunil R. Kewate, S.V. Karmare, Nehal Sayankar, and
Siddharth Gavhale, (2014). “Automatic Speed Control
System by the Color Sensor for Automobiles–An Innovative
Model Based Approach”. International Journal of
Advanced Mechanical Engineering, ISSN 2250-3234, Vol.
4, No. 2, pp. 223-230.
[15]. Wong, M. M., C. H. Tan, J. B. Zhang, L. Q. Zhuang, Y. Z. Zhao, and M. Luo, (2006). “On-line reconfiguration to
enhance the routing flexibility of complex automated
material handling operations”. Robotics and Computer-
Integrated Manufacturing, Vol. 23, No. 3, pp. 294-304.
[16]. Babiceanu, R. F., Chen. F. F., and R.H. Sturges, (2005).
“Real-time holonic scheduling of material handling operations in a dynamic manufacturing environment”.
Robotics and Computer-Integrated Manufacturing, Vol.
21, No. 4-5, pp. 1-8.
[17]. A. Spivakovshy, and V. Dyachkov, Conveyors and
Related Equipment. Chapter-IV, VII & XI, Peach Publishers,
Moscow.
