Compact Slotted Microstrip Patch Antenna for X-Band

Alok Kumar Gupta*, Rajan Mishra**
* PG Scholar, Department of Communication Engineering, Madan Mohan Malviya University of Technology, Gorakhpur, India.
** Assistant Professor, Department of Electronics and Communication Engineering, Madan Mohan Malaviya University of Technology, Gorakhpur, India.
Periodicity:May - July'2016
DOI : https://doi.org/10.26634/jcs.5.3.8067

Abstract

In this paper, a planar slotted microstrip antenna with rectangular slotted patch used as the single radiating element and tapered shape slot in ground has been designed and analyzed. The proposed antenna is compact in size with an 3 overall dimension of 22×24×1.6 mm . This antenna is fabricated on FR-4 epoxy substrate with relative permittivity of 4.4 and loss tangent of 0.02 and 50Ω. Resistance is used as the characteristics impedance for microstrip line feed, being compact in size, antenna still achieves a bandwidth of wide range from 3.6 GHz to 11.8 GHz. By properly adjusting the feed gap (h), that is the distance between the tuning stub and the slot in the ground plane, determines the coupling between them and a good impedance matching is obtained and by cutting two slots on the rectangular radiating patch, with dimensions 1.5×1 mm and 1.5×1.5 mm, the gain of the antenna is drastically improved and it is found that gain plot is above zero for frequency range of 8 GHz to 12 GHz and a maximum gain of 9.2 dB is obtained at 12 GHz frequency.

Keywords

Microstrip Line Feeding, Rectangular Tunning Stub, Tappared Slotted Ground, X-band.

How to Cite this Article?

Gupta, A. K., and Mishra, R. (2016). Compact Slotted Microstrip Patch Antenna for X-Band. i-manager’s Journal on Communication Engineering and Systems, 5(3), 38-42. https://doi.org/10.26634/jcs.5.3.8067

References

[1]. Federal Communications Commission, (2002). Revision of Part 15 of the commission's rules regarding ultra-wide-band transmission systems First Report and Order FCC02.V48. Tech. Rep., Washington DC, USA.
[2]. R. Azim, M. T. Islam, and N. Misran, (2011). “Compact tapered shape slot antenna for UWB applications”. IEEE Antennas Wireless Propag. Lett., Vol. 10, pp. 1190–1193
[3]. H. D. Chen, (2003). “Broadband CPW-fed square slot antennas with a widened tuning stub”. IEEE Trans. Antennas Propag., Vol. 51, No. 8, pp. 1982-1986.
[4]. Y.F. Liu, K.L. Lan, Q. Xue, and C.H. Chan, (2004). “Experimental studies of printed wide-slot antenna for wideband applications”. IEEE Antennas Wireless Propag. Lett., Vol. 3, No. 1, pp. 273-275.
[5]. W. Mazahar, M. A. Tarar, F. A. Tahir, Shan Ullah, and F. A. Bhatti (2013). “Compact Microstrip Patch Antenna for Ultrawideband Application”. PIERS Proceedings, Stockholm, Sweden, pp. 12-15.
[6]. J. Y. Sze and C. C. Chang, (2008). “Circularly polarized square slot antenna with a pair of inverted-L grounded strips”. IEEE Antennas Wireless Propag. Lett., Vol. 7, pp. 149- 151.
[7]. J.Y. Chiou, J.Y. Sze, and K.L. Wong, (2003). “Abroadband CPW-fed strip loaded square slot antenna”. IEEE Trans. Antennas Propag., Vol. 51, No. 4, pp. 719-721.
[8]. S. I. Latif, L. Shafai, and S. K. Sharma, (2005). “Bandwidth enhancement and size reduction of microstrip slot antenna”. IEEE Trans. Antennas Propag., Vol. 53, No. 3, pp. 994-1003.
[9]. D.C. Chang, J.C. Liu, and M.Y. Liu, (2005). “Improved Ushaped stub rectangular slot antenna with tuning pad for UWB applications”. Electron. Lett., Vol. 41, No. 20, pp. 1095- 1097.
[10]. J. Y. Jan and J. C. Kao, (2007). “Novel printed wideband rhombus-like slot antenna with an offset microstripfed line”. IEEE Antennas Wireless Propag. Lett., Vol. 6, pp. 249-251.
[11]. Thiripurasundari, D. and D. S. Emmanuel, (2013). “Compact dualband - reject UWB antenna with sharpband - edge frequency”. Progress In Electromagnetics Research Letters, Vol. 36, pp. 41-55.
[12]. Anil Kr Gautam, (2013). “A (CPW)-fed compact Ultra Wide Band (UWB) microstrip antenna”. IEEE Antennas and Wireless Propagation Letters, Vol. 12, pp. 151-154.
If you have access to this article please login to view the article or kindly login to purchase the article

Purchase Instant Access

Single Article

North Americas,UK,
Middle East,Europe
India Rest of world
USD EUR INR USD-ROW
Pdf 35 35 200 20
Online 35 35 200 15
Pdf & Online 35 35 400 25

Options for accessing this content:
  • If you would like institutional access to this content, please recommend the title to your librarian.
    Library Recommendation Form
  • If you already have i-manager's user account: Login above and proceed to purchase the article.
  • New Users: Please register, then proceed to purchase the article.