References
[2]. J. R. Duflou, E. Fallahi Sichani, J. De Keuster, and J.P.
Kruth, (2009). “Development of a real time monitoring
and adaptive control system for Laser Flame Cutting”.
Conference Proceedings, ICALEO 2009.
[3]. John Ion, (2005). “Laser processing of engineering
materials: Principles, Procedure and Industrial
Application”. Elsevier Butterworth-Heinemann, pp. 347-
365.
[4]. N. Rajaram, J. Sheikh-Ahmad and S.H. Cheraghi
(2003). "CO2 laser cut quality of 4130 steel”. International
Journal of Machine Tools & Manufacture, Vol. 43, pp. 351-
358.
[5]. S. P. H. Narendra B. Dahotre, (2008). Laser Fabrication
and Machining of Materials. Newyork: Springer, pp. 34-
38.
[6]. William Steen and Jyoti Mazumder (2008). Laser
Material Processing. London: Springer-Verlag, 2008.
[7]. M. Madic, M. Radovanovic, M. Trajanovic, and M.
Manic, (2015). “Multi objective optimization of laser cutting using cuckoo search algorithm”. Journal of
Engineering Science and Technology, pp. 353-363.
[8]. Avanish Kumar Dubey and Vinod Yadava, (2008).
“Laser beam machining - A Review”. International Journal
of Machine Tools & Manufacture, pp. 609-628.
[9]. K. Venkatesan, R. Ramanujam, and P. Kuppan,
(2014). “Analysis of cutting forces and temperature in laser
assisted machining of Inconel 718 using Taguchi
th Method”. 12 Global Congress on Manufacturing and
Management (GCMM), (2014), Vol. 97, pp. 1637-1646.
[10]. M. Lakshmi Chaitanya, and A. Gopala Krishna,
(2013). "Multi objective optimization of laser beam cutting
process". IJRMET, Vol. 3, No. 2.
[11]. Ruben Phipon and B.B. Pradhan, (2012). “Control
parameters optimization of laser beam machining using
genetic algorithm” .International Journal of
Computational Engineering Research, Vol. 2, No. 5.
[12]. Koji Hirano and Remy Fabbro, (2011). “Experimental
observation of hydrodynamics of melt layer and striation
generation during laser cutting of steel”. Physics Procedia,
pp. 555-564.
[13]. R. Singh, S.N Melkote, (2011). “Characterization of a
hybrid laser assisted mechanical micromachining
(LAMM) process for a difficult to machine materials”.
International Journal of Machine Tools & Manufacture,
pp. 1139-1150.
[14]. A. K. Dubey and Vinod Yadava, (2008).
“Optimization of kerf quality during pulsed laser cutting of
aluminium alloy sheet”. Journal of Materials Processing
Technology, pp. 412-418.
[15]. A. Sharma and Y. Vinod, (2012). “Modelling and
optimization of cut quality during pulsed Nd:YAG laser
cutting of thin Al-alloy sheet for straight profile”. Optics and
Laser Technology, pp. 159-168.
[16]. K. Abdel Ghany and N. Newishy, (2005). “Cutting of
1.2 mm thick austenitic stainless steel sheet using pulsed
and CW Nd:YAG laser”. Journal of Materials Processing
Technology, pp. 438-447.
[17]. P. Di Pietro and Y. L. Yao, (1994). “An investigation into
characterizing and optimizing laser cutting quality”.
International Journal of Machine Tools and Manufacture,
pp. 225-243.
[18]. A. F. H. Kaplan, (1995). “An analytical model of metal
cutting with a laser beam”. Journal of Applied Physics, pp.
2198-2208.
[19]. B.S. Yilbas and A. Kar, (1998). “Thermal and
efficiency analysis of CO2 laser cutting process”. Optics
and Lasers in Engineering, pp. 17-32.
[20]. Anon, “Facts about laser cutting techniques- report”.
AGA Group Ltd, pp. 3-18.
