Wind energy conversion system used as an Active filter

M. Lavanya*, K. Swetha**
* PG Scholar, Department of Electrical and Electronics Engineering, S.R.K.R engineering college, Bhimavaram, India.
** Assistant Professor, Department of Electrical and Electronics Engineering, S.R.K.R engineering college, Bhimavaram, India.
Periodicity:January - March'2015
DOI : https://doi.org/10.26634/jee.8.3.3166

Abstract

This paper deals with the performance of a wind energy conversion system operating as a power generator and Active filter simultaneously. As a power generator, the wind energy conversion system converts wind energy into electrical energy; as an active filter, it sinks the harmonic currents injected by Non linear load connected at the same feeder. This study is intended to two types of disturbances: voltage dips and wind speed variations. Simulation results are carried out by Matlab/simulink software.

Keywords

Keywords: Doubly Fed Induction Generator(DFIG), Voltage Dips, Wind Speed Variations, Wind Energy Conversion System (WECS)

How to Cite this Article?

Lavanya, M., and Swetha, K. (2015). Wind energy conversion system used as an Active filter. i-manager’s Journal on Electrical Engineering, 8(3), 40-47. https://doi.org/10.26634/jee.8.3.3166

References

[1]. Grazia Todeschini (2005). “Transient Response of a Wind Energy Conversion System Used as Active Filter”, IEEE Transaction on energy conversion, Vol.26, No.2, pp. 523- 531.
[2]. T. Ackermann, Hoboken, NJ.Wiley (2005). “Wind Power in Power Systems”.
[3]. L. H. Hansen, P. H. Madsen, F. Blaabjerg, H. C. Christersen, U. Lindhard, and K. Eskildsen, (2009). “Generators and power electronics technology for wind turbines,” in Proc. 27th Annu. Conf. IEEE Ind. Electron. Soc., Denver, CO, pp. 2000–2005.
[4]. B. Singh, K. Al-Haddad, and A. Chandra, (1999). “A review of active filters for power quality improvement,” IEEE Trans. Ind. Electron, Vol.46, No.5, pp. 960-971.
[5]. H. Akagi, E. H. Watanabe, and M. Aredes, (2007). “ Instantaneous Power Theory and Applications to Power Conditioning, “ IEEE Press, pp.379.
[6]. M. T. Abolhassani, H. A. Toliyat, and P. Enjeti, (2003). “Stator flux oriented control of an integrated alternator/active filter for wind power applications,” Vol.1, pp. 461-467.
[7]. M. T. Abolhassani, P. Niazi, H. A. Toliyat, and P. Enjeti, (2008). “Integrated doubly fed electric alternator/active filter (IDEA), a viable power quality solution, for wind energy conversion systems,” IEEE Trans. Energy Convers., Vol. 23, No. 2, pp. 1642–650.
[8]. E. Tremblay, A. Chandra, and P. Lagace, (2006). “Grid-side converter control of DFIG wind turbines to enhance power quality of distribution network.” IEEE Transaction.
[9]. G. Todeschini and A. E. Emanuel, (2010). “Wind energy conversion system as an active filter: Design and comparison of three control systems,” Vol. 4, No. 4, pp. 341-353.
[10]. G.Todeschini and A. E. Emanuel, (2011). “The DFIG as harmonic compensator by means of LSC modulation: Control system and derating for steady state th performance, ” in Proc. 25 IEEE Appl. Power Electron. Conf. Expo., Palm Beach, CA, pp. 2096–2103.
[11]. N. Mohan, T. M. Undeland, and W. P. Robbins, (2003). Power Electronics: Converters, Applications and Design.
[12]. A. Mullane, G. Lightbody, and R. Yacamini, (2005). “Wind-turbine fault ride through enhancement,” IEEE Trans. Power Syst., Vol. 20, No. 4, pp. 1929– 1937.
[13]. J. Morren and S. W. H. de Haan, ( 2005). “Ridethrough of wind turbines with doubly-fed induction generator during a voltage dip,” IEEE Trans. Energy Convers., Vol. 20, No. 3, pp. 435–441.
[14]. G.Todeschini, Jun. (2010). “Wind energy conversion systems as active filters: Steadystate transient analysis,” in Electrical Engineering—Circuit Design, Saarbruecken, Germany, VDM Publishing House
[15]. J. Schlabbach, (2004). “Low voltage fault ride through criteria for grid connection of wind turbine th generators,” in Proc. 5 Int. Conf. Eur. Electricity Market 2008, Piscataway, pp. 1–4.
[16]. B. Andresen and K. Johansen, (2008 ). “Grid code and wind farm control requirements—What to control, th why, where and how,” in Proc. 7 Int. Workshop Large Scale Integr.Wind Power Transmiss. Netw.Offshore Wind Farms, Madrid, Spain.
[17]. S. Seman, N. Niiranen, S.Kanerva, and A. Arkkio, (2004). “Analysis of a 1.7MVA doubly fed wind-power induction generator during power systems disturbances,” in Proc. Nordic Workshop Power Ind. Electron., Trondheim, Norway.
[18]. W. Leonhard, (2001). Control of Electrical Drives. Electric driving. Berlin, Germany: Springer-Verlag.
[19]. A.D.Hansen and G.Michalke, (2006). “Fault ridethreou capability of DFIG wind turbines,” Sci. Direct—Renewable Energy, Vol. 32, No. 1.
[20]. A. G. Abo-Khalil and L. Dong-Choon, (2006). “Dynamic modeling and control of wind turbines for gridconnected wind generation system,” in Proc. 37th IEEE Power Electron. Spec. Conf, Jeju, Korea, pp.1-6.
[21]. S. Heier, Hoboken,NJ: Wiley, (1998). “Grid Integration of Wind Energy Conversion Systems.”
[22]. J. S. Rohatgi and V. Nelson, (1994). “Wind Characteristics: An Analysis for the Generation of Wind Power,” Cayon, TX: Alternative Energy Institute, pp.239.
[23]. F. Blaabjerg and Z. Chen, (2006). “Power Electronics for Modern Wind Turbine”, (Synthesis Lectures on Power Electronics). San Rafael, CA: Morgan & Claypool.
[24]. A. K. Jain, R. Tirumala, N. Mohan, T. Gjengedal, and R. M. Halet, ( 2002). “Harmonics and flicker control in wind farms,” in Wind Power Impacts Power Syst. Workshop, Oslo, Norway.
If you have access to this article please login to view the article or kindly login to purchase the article

Purchase Instant Access

Single Article

North Americas,UK,
Middle East,Europe
India Rest of world
USD EUR INR USD-ROW
Pdf 35 35 200 20
Online 35 35 200 15
Pdf & Online 35 35 400 25

Options for accessing this content:
  • If you would like institutional access to this content, please recommend the title to your librarian.
    Library Recommendation Form
  • If you already have i-manager's user account: Login above and proceed to purchase the article.
  • New Users: Please register, then proceed to purchase the article.