Design and Analysis of Connecting Rod of Die Pillar Station of Vacuum Thermoforming Machine

C.P. Gaikwad*, S.D. Kalpande**
* - ** Mechanical Engineering Department, MET Institute of Engineering & Research, Nasik, India.
Periodicity:May - July'2014
DOI : https://doi.org/10.26634/jme.4.3.2725

Abstract

The objective of this work is to design and analyze the performance of connecting rod, through a simple experimental model of Forming and Trimming Die Pillar Station of Vacuum Thermoforming Machine. A connecting rod is a machine member subjected to alternating direct compressive and tensile forces, where compressive forces are generally more in connecting rods so that it is considered for its prime safety. A parametric mathematical model of connecting rod is modeled using Pro-E Wildfire 4.0 Software and its Static Structural Analysis is carried on Ansys v-11.0 Workbench. FEA of connecting rod is done using C50 as its base material to determine its von-Misses stress, Max shear Stress, Total Deformation, and Alternating stress to cycles graph. Also, the Stiffness of connecting rod is calculated. Basically, the analysis is carried with four different element sizes such as 1 mm, 2 mm, 3 mm, and 4 mm and best element is selected indicating correct results.

Keywords

Connecting Rod, Thermoforming, Ansys, FEA (Finite Element Analysis), Compressive, Mathematical Model, Design, Element Size, Meshing, Forming.

How to Cite this Article?

Gaikwad, C., & Kalpande, S. D. (2014). Design and Analysis of Connecting Rod of Die Pillar Station of Vacuum Thermoforming Machine. i-manager's Journal on Mechanical Engineering, 4(3), 9-14. https://doi.org/10.26634/jme.4.3.2725

References

[1]. R.S. Khurmi and J.K. Gupta, (2005). A Textbook of Machine Design, Eurasia Publishing House.
[2]. Ramanpreet Singh, (2013). “Stress Analysis of Orthotropic and isotropic connecting rod using Finite element method”. IJMERR, Vol.2, No.2
[3]. K. udershn Kumar, (2012). “Modelling and Analysis of Two Wheeler Connecting Rod”. IJMER, Vol.2, Issue 5.
[4]. Throne. L. James, (2004). “Technology of Thermoforming”. Sherwood Technologies, Inc, USA.
[5]. PSG Design Data Book, (2011). Kalaikathir Achchagam.
[6]. http://sites.mech.ubc.ca/~alivakil/Mech479/Notes /2013-11-14_MECH479_Ansys Workbench_Tutorial. pdf.
[7]. Sohail Akbar Khan, (2009). “Improved Mathematical Model of Sheet Reheat Phase in Thermoforming Process”. Thesis Report of Masters of Applied Science, Canada.
[8]. Saeed Moaveni, (1999). “Finite Element Analysis Theory and Applications with Ansys”, Prentice Hall, USA.
If you have access to this article please login to view the article or kindly login to purchase the article

Purchase Instant Access

Single Article

North Americas,UK,
Middle East,Europe
India Rest of world
USD EUR INR USD-ROW
Pdf 35 35 200 20
Online 35 35 200 15
Pdf & Online 35 35 400 25

Options for accessing this content:
  • If you would like institutional access to this content, please recommend the title to your librarian.
    Library Recommendation Form
  • If you already have i-manager's user account: Login above and proceed to purchase the article.
  • New Users: Please register, then proceed to purchase the article.