Study of Engineering Properties of Recycled Concrete Aggregate Concrete

P K Gupta*, Ritesh Bhatia**
* Deportment of Civil Engineering, Indian Institute of Technology Roorkee, Roorkee, India.
** Structural Engineer, Aurora, Illinois.
Periodicity:March - May'2013
DOI : https://doi.org/10.26634/jste.2.1.2266

Abstract

A series of experiments were conducted on two grades of concrete namely M25 and M40 with three nominal replacement ratios of 0%, 25% and 50% using recycled concrete aggregates (RCA). The RCA concrete was obtained using a new mix design in which the residual mortar content of the recycled aggregates was considered as a part of sand in the new concrete. For the six mixes, tests were conducted to determine the engineering properties of the RCA concrete and the results were compared to that of the natural aggregate concrete. A total of 72 specimens were cast and tested. The tests conducted included Slump, Non-destructive testing, Compressive strength, Splitting tensile strength and Elastic modulus. Based on the investigations it was found out that the proposed method gave comparable results to that of the concrete made of natural aggregates. Compressive strength, UPV, Rebound Hammer and Elastic modulus values were established to be more than that of the natural aggregate concrete while Slump and Splitting tensile strength were lesser

Keywords

Recycled concrete aggregate concrete (RCA concrete), Properties, Slump, Compressive strength, Splitting Tensile strength, Elastic Modulus, Non-Destructive testing

How to Cite this Article?

Gupta, P.K., and Bhatia, R. (2013). Study of Engineering Properties of Recycled Concrete Aggregate Concrete. i-manager’s Journal on Structural Engineering, 2(1), 20-26. https://doi.org/10.26634/jste.2.1.2266

References

[1]. Fathifaz, G., Abbas, A., Razaqpur, A., Isgor, O., Fournier, B., & Foo, S. (2009). New mixture proportioning method for concrete made with recycled concrete aggregate. Journal of Material in Civil Engineering (ASCE), 21 (10), 601-611
[2]. Hanson, T. C. (1986). Recycled aggregates and recycled aggregate concrete second state-of-the art report, developments 1945-1985. Material & Structures, 19, 201-248
[3]. IS-10262:2009, Concrete mix proportioning- Guidelines. New Delhi: Bureau of Indian Standards
[4]. IS-1199:1959, Methods of sampling and analysis of concrete. New Delhi: Bureau of Indian Standards
[5]. IS-13311:1992, Non-destructive testing of concrete-Methods of test. New Delhi: Bureau of Indian Standards
[6]. S-2386:1963 (Part 1 and 3), Methods of test for aggregates for concrete. New Delhi: Bureau of Indian Standards
[7]. IS-383:1970, Specification for coarse and fine aggregates from natural sources for concrete. New Delhi: Bureau of Indian Standards.
[8]. IS-516:1959, Methods of tests for strength of concrete. New Delhi: Bureau of Indian Standards.
[9]. IS-5816:1999, Splitting tensile strength of concrete -method of test. New Delhi: Bureau of Indian Standards.
[10]. Nixon, P. J. (1978). Recycled aggregate as an aggregate for concrete- a review, First state-of-the-art report RILEM TC-37-DRC. Material and structures (RILEM) (65), 371-378.
If you have access to this article please login to view the article or kindly login to purchase the article

Purchase Instant Access

Single Article

North Americas,UK,
Middle East,Europe
India Rest of world
USD EUR INR USD-ROW
Pdf 35 35 200 20
Online 35 35 200 15
Pdf & Online 35 35 400 25

Options for accessing this content:
  • If you would like institutional access to this content, please recommend the title to your librarian.
    Library Recommendation Form
  • If you already have i-manager's user account: Login above and proceed to purchase the article.
  • New Users: Please register, then proceed to purchase the article.