References
[1]. Abdi, M.R. and Arjomand, M.A., (2011). Pullout tests conducted on clay reinforced with geogrid encapsulated in thin layers of sand. Geotextiles and Geomembranes, 29: 588-595.
[2]. Alamshahi, S., and Nader, H. (2009). Bearing capacity of strip footings on sand slopes reinforced with geogrid and grid-anchor. Geotextiles and Geomembranes, 27: 217–226.
[3]. Chungsik, Y., (2001). Laboratory investigation of bearing capacity behavior of strip footing on geogrid-reinforced sand slope. Geotextiles and Geomembranes, 19: 279–298.
[4]. Choudhary, A. K. & Verma, B. P. (2001). Behavior of footing on reinforced sloped fill. Proceedings of an International Conference on Landmarks in Earth Reinforcement, Fukuoka, Kyushu Japan, Nov., 2001, pp. 535–539.
[5]. Choudhary, A. K., Jha, J. N. and Gill, K. S., (2010). Laboratory investigation of bearing capacity behavior of strip footing on reinforced fly ash slope. Geotextiles and Geomembranes, 28, No. 4, 393–402.
[6]. Das, B. M., Shin, E. C. and Omar, M. T. (1994). The bearing capacity of surface strip foundation on geogrid reinforced sand and clay – a comparative study. Journal of Geotechnical and Geological Engineering, 12, No. 1, 1–14.
[7]. D. Leshchinsky, H. Ling and G. Hanks, (1995), Unified Design Approach to Geosynthetic Reinforced Slopes and Segmental Walls, Geosynthetics International, Vol. 2, No. 5, pp. 845-881.
[8]. Ghosh, A. and Dey, U. (2009). Bearing ratio of reinforced fly ash overlying soft soil and deformation modulus of fly ash. Geotextiles and Geomembranes 27: 313–320.
[9]. Gill, K. S., Choudhary, A. K., Jha, J. N. & Shukla, S. K. (2013). Experimental and numerical studies of loaded strip footing resting on reinforced fly ash slope. Geosynthetics International, 20, No. 1, 13–25.
[10]. Hatami, K. & Bathurst, R. J. (2005). Development and verification of a numerical model for the analysis of geosynthetic reinforced soil segmental walls under working stress condition. Canadian Geotechnical Journal, 42, No. 4, 1066–1085.
[11]. Huang, C., Tatsuoka, F. & Sato, Y. (1994). Failure mechanism of reinforced sand slopes loaded with footing. Soil and Foundation, 24, No. 2, 27–40.
[12]. Kentaro, Y. and Koji, K. (2001). Failure mechanisms and bearing capacities of reinforced foundations. Geotextiles and Geomembranes, 19: 127-162.
[13]. Michalowski, R. L., (1997). Stability of uniformly reinforced slopes. Journal of Geotechnical and Geoenvironmental Engineering, 123 (6): 546-556.
[14]. Mittal, S., Shah, M. Y. & Verma, N. K. (2009). Experimental study of footing on reinforced earth slope. International Journal of Geotechnical Engineering, 3, No. 2, 251–260.
[15]. Sawwaf, E. M. and Nazir, A. K. (2010). Behavior of repeatedly loaded rectangular footings resting on reinforced sand. Alexandria Engineering Journal, 49: 349-356.
[16]. Shukla, S. K., Sivakugan, N. & Das, B. M. (2011). A state of the art review of geosynthetic reinforced slopes. International Journal of Geotechnical Engineering, 5, No. 1, 17–32.
[17]. Sobotka, Z., (1961). The slip lines and surfaces in the theory of plasticity and soil mechanics. Applied Mechanics Review, 14 (10): 753-759.
[18]. Spencer, E, (1964). Circular and logarithmic spiral slip surfaces. J. Soil Mech. Found. Div., ASCE, 95 (Sm1): 227-234.
[19]. Suksun, H and Anek, N, (2010). “Bearing resistance of bearing reinforcement embedded in sand”. Soils and Foundations, 50 (2): 215-226.
[20]. Taylor, D.W., (1948). “Fundamental of Soil Mechanics”. Wiley, New York.
